Відео

Good to see you applying glue when assembling back. Some are not doing this important step

Which battery model number would i need for the garmin 2 instinct watch. Also what is the name of the tool you are using first to open watch face. Thnx you for your guidance.

Salam

You don’t saw us how you really struggled to open it.. also when you open the screen ,there is no cable in it…so go tell your friends about it and leave the rest world

Is it possible to replace memory card in Garmin Forerruner?

ثمن

الثمن والمدينة ؟

Mine must have been cemented on the watch started breaking trying to open it chip by chip

Can u share how u stick the sensor?

nice music

Hi, how do you remove the whole modul? cz i wanna fix the leakage by changing the o ring on push button on all 4 buttons.

❤❤❤❤❤

I have old one

The idea is clever, I used it, it had a good result. Thank you for this link in the description

The idea is clever, I used it, it had a good result. Thank you for this link in the description

Thank you for this link in the description

Thank you for this link in the description ❤

Thank you for this link in the description

The idea is clever, I used it, it had a good result. Thank you for this link in the description

The idea is clever I used it. it had a good result. Thank you for this link in the description

Ale bicik

Excellent video. thanks. I have this same model and it doesn't find a GPS signal. What do I do?

This is a BS video. I have personally removed the screens on two Forerunner 225's and believe me, they do not come off like he shows here. The one he is working on has obviously had its screen replaced before, and was not secured by the original factory adhesive, as one can see from the spotty and sparse residue when he lifts the screen off from its seat around the watch 1:15. In fact, it appears both from the way he's removing it, as well as judging from the spotty adhesive residue remaining around the screen's seat, that this screen was simply press fit back onto the seat with no adhesive used at all. The reality is you cannot simply use a splunge tool or utility knife and easily lift the screen from its seat as he deceptively makes it appear here, as the grip from the factory adhesive will not allow it, and you will absolutely crack the glass screen if you attempt this as he shows. The only possibility of weakening the factory adhesive is to get some 99% isopropyl alcohol, put it on a Q-Tip, and allow it to soak in around the outer edges of the screen for a good 5-10 minutes which will loosen the bonds of the adhesive first. Otherwise, be prepared to replace the screen, as it is made of glass, and it does crack very, very easily (more easily than you might expect) if you attempt to get some kind of thin, sharp metal implement underneath an edge somewhere and pry up on it. Whatever adhesive, if any, was used on the replacement screen he's attempting to remove here (for a second time), it was certainly not secured by either the factory adhesive, nor with the recommended B-7000 adhesive used for these battery replacement and screen repairs, and was obviously some kind of adhesive with much lighter tackiness to lift so easily as it did here, and even then, I suspect it was merely press fit back onto the seat to come off so easily as was shown here. Don't be deceived. This video is an invitation for you to crack and ruin your screen, as he makes you think your screen will come off easily, with almost no effort, which is not the case. I ruined 2 screens doing battery replacements on both of my Forerunner 225's, before I learned about the 99% pure alcohol trick which I'm planning on trying on the next repair I do in a few weeks. I would also recommend replacing the original 3.7v 180mAh battery with a 3.7v 450mAh 361-00086-00 battery for a superior extended battery time (I can go for a 2 hour run, with the HRM and display light on the whole way, and 1 minute alarms turned on, and it doesn't even go down by 2%... ;-)

Where can I buy the sensor for suunto d6?

I don't know what that means...?

I have the same problem in my suunto d4i , what should i do ?.

Hi there I have a d4i (bought second hand) needed battery change but when i put one in myself the screen says "no sw" is this just a software issues? would updating solve? cheers

Great job, I'm from Brazil, greetings, can you tell me how long this watch takes to replace the battery?

Thank you. Was there any glue on it to begin with? I see people heating it up to melt the glue before they try to get the top off.

Did you just need to heat gun the watch in order to de stroy the glue? I do wonder if the newer ones can be opened the same way....

Top On Sale Product Recommendations!;Watch accessories for suunto core all blac core nylon strap outdoor mountaineering strap waterproof nylon watch strap;Original price: RUB 1403.45;Now price: RUB 744.19;Click&Buy: s.click.aliexpress.com/e/_EJWe5q5

Great job

Perfect way to void you're waranty !!!!!

This is misleading at the beginning! the face is stuck down with adhesive tape (keeping it waterproof) and it does not come off so easily! cracking the screen is going to happen unless you weaken the tape bond somehow! be warned.

Where is o-rings of sensor?

شكرا لك بالتوفيق

is it possible to buy only the face of the clock instead full screen? i only want to change face color...

Good job 👏🎉

Привет друг, скажи пожалуйста на suunto D6 какой датчик подходит? Напиши номер пожалуйста.

What glue did you use for repair? Is it waterproof?

I let my battery run completely out till there was nothing on the screen for a couple days, recharged the battery, and it's staying charged again just like brand new. Hopefully this helps someone so they don't have to take the watch apart.

how to buy a sensor？

Thank you for this information, now I can properly inspect my watch if I ever need to service it myself. I could not find any documentation online for this watch (PCB, Schematic diagram, disassembly procedure, etc.) and your video taught in a concise way that was easy to follow. Now I may reverse engineer at my leisure! My only advice to you, is to mention the precaution regarding the flex cable at the before using the pry tool rather than at the end and to perhaps show an image or footage showing the placement of the flex cables, for those who aren't wise enough to watch the video fully before attempting to open the watch, and pause before you clarify. 😉 (This is a very small complaint, and I only point it out because I used to be the type of person to damage personal electronics this way 😅) Thanks from an electronics technologist student from Canada! Wonderful work, and you've earned my sub! 😊

Thank you for this usefull video. Do you have any information if sensors of Suunto Zoop computers can be replaced? I have a couple of them with broken sensor.

Its like mine is glued shut. I am literally destroying the shell. Nothing works.

Thx for the great clip! It’s exactly what I have been looking for! I bought the pressure sensor and few questions 🙋‍♂️- Should I also need to buy a flex cable of sensor to attach new pressure sensor or could use the original one after detaching the broken sensor? If need to buy the cable, what’s the name of it or how can I search from Aliexpress? And also what’s the orientation of sensor when attaching to the cable? Thanks a ton in advance.

Добрый день! Где можно купить такой датчик и как он правельно называется? У меня сломался suunto zoop хочу его отремонтирывать.

I'ts good❤

Do u have a video of replacing the battery?

Hi, I’m hoping you can help me, a screw cam out of my pressure sensor, do you think I can just put a new screw in or should I take it to a professional?