- 8
- 42 256
The Maintenance Man
Приєднався 3 вер 2021
Samsung Fridge Repair, Getting Rid Of Water Under Crisper Drawers (EASY DIY)
Today we installed an aftermarket drain tab onto the heating element of a Samsung bottom freezer refrigerator. They have issues with freezing and leaking water all over the place so here’s your fix!!
Переглядів: 10 027
Відео
Goodman Front Return Blower Motor Replacement
Переглядів 2,9 тис.3 роки тому
Me and my tech replacing a blower motor in a Goodman Front Return Electric Furnace.
No one filed a lawsuit against Samsung ?
Thanks for the video! How has the repair held up?
It fixes it permanently, I’ve installed these on at least 40 Samsung refrigerators. This is the “fix” that should have had a recall but didn’t.
The bottom long scew on the panel just keeps going round and round & not coming out when I try to take off the panel. Any idea's? I don't want to force or break anything.
Tug on the cover gently like I did, if the screw is spinning it’s most likely stripped and not screwed into the backing. Replace the screw with a bigger one when you put it back together. Hope this helps!
I'm assuming we unplug the fridge?
Yes, unplug while servicing!
Wow this is nice to know I been taking the coil completely out to change the motor
🙂😀😃😄😁😆😅🤣👍👍
Good job
Yeah I wish mine was this easy to get out the damn thing just keeps spinning
How did you get that clip out? Seems really tight in there and I don’t want to bend or damage the heating coil
Bend it back and flip it over and you can bend it a little to remove it, the element has some play. Hope this helps!
Thawing the ice in the drain tube can take a long time. You can speed up the thawing of the ice by pouring a shot of vodka into the tray, seriously that's what I did and the tube was cleared in a few minutes. I suppose rubbing alcohol would do the trick too.
So much trouble to pull that blower out from that little space…but do think this job should be done by two people…cause that furnace was made by a really tiny people
Good way to crack your bathtub if your not careful.
I got a hammer jus like that 😂
Don’t scratch the tub
Are all tub drains the same?
There’s different sizes, you can buy one with an adapter in case it’s a different size. Just be careful if you’ve never taken one out, you can easily snap the tub shoe under the tub if you do what I did here. Make sure everything is secure if you can.
Surprised you didn't miss and crack the tub smh
Just did one of these today. No side access so could never get the cage out. Had to pull and replace motor inside housing. Have to do another one tomorrow. What a crack smoking design.
Don't worry about the p trap look out for the pipe wrench
So where did the water go you poured down the drain and how do you get it out?
Lol i was wondering the same thing
It goes to the evaporation pan in the bottom of the refrigerator.
It goes into the drain pan, but with the amount I use on most of these I shopvac the water up off the ground and the pan when I’m done! Thanks for watching
Pain in the ass type of jobs!
Nice hammer
What’s the name of thar price? Could you share the link please
NEW OEM Produced for SAMSUNG DA61-06796A Refrigerator Drain Clip Evaporator by OEM Mania Replacement Part - replaces AP5579885 2683162 PS4145120 Here ya go!
@@TheMaintenanceMan92
Es un dolor de bolas, en algunos modelos hay que desistalar el evaporador.
Man. This is what the hell im doing now. Wife says I got a new drain and never knows just how stupid it is to do this "simple" crap. Just hope I don't mess the threads or plumbing up after I beat the drain out and use an impact. Wrenching on it isn't working.
If the crosshairs are broke this works, I had it on the lowest setting and took it easy. If you do it hard it’s very possible to snap the shoe underneath so be careful!
This made me smile! Thanks for sharing! Don't miss out > Promo>SM!!!
Outstanding
Could you just turn off the fridge freezer for weekend ? Would that work doing this ?
Maybe a charged battery might help. But good way of doing it!
The battery was charged, I just had it on a low setting and didn’t want to snap the tub shoe underneath. Thank you!
Best way I’ve seen! Faster too. Nice work
That's one way to use your tools 🤔🤦♂️
Typical maintenance man …
That’s a nice starter kit, Lee me know when you make it to the MX series. 💋
Get it man!
they better be paying you good.. great job.
and is that a special socket?
superior tools tub drain removal tool
what the hell are you beating on?
It’s a tub drain extractor
funny looking hammer
Everythings a hammer if you squint long enough
cracked me up 😁😆😅🤣👍