Відео

Hi Dave, it depends on how the mirrors themselves mount. Please give us a call at 254-756-2139 or email us at info@perry-co.com so we can check fitment with your specific mirrors.

The windows are made of dual sided scratch resistant polycarbonate.

Hi James, we ask people to call because it's easier and faster for everyone to talk over the phone rather than messaging back and forth through UA-cam comments. We are happy to answer any questions you may have here if you'd like.

Why are they so expensive there's not much to making these thin metal doors 😳

Our doors are made with 14 gauge powder coated steel with a 3/16" powder coated steel hinge and a dual locking rotary latch. We have invested a lot into R&D and taking our customers needs and wants into consideration to make these doors that we are very proud of and that people love. They are also a 3 piece design which not only allow for endless customization options but also allows for the top panel to be removed and replaced with our upper half door attachment for year round use with a full sliding window and a vent window. Our doors are also fully manufactured from raw materials to finished product and shipped out from our facility in Waco, Tx.

Thank you! We are so excited to be able to work with everyone at Doss Farms!

Hi Scott, reach out to Jenny at Diesel Freak 989-748-4145. They are located in Michigan but will ship to Canada.

Here are links to our website with images including one of the inside of the door with the window down. fortresspro.com/contact/product/upper-half-door-attachment-ranger-crew-1000/ fortresspro.com/contact/product/upper-half-door-attachment-ranger-1000/

Hi Eric! We do not have one specifically for that brand but if give us a call at 800-792-3246 we can get the measurements of your mower to see if we have one that would fit.

Due to the universal design of this product U-bolts are not used so varying sizes of roll bars can be accommodated for. If you would prefer to use U-bolts we recommend either our Aardvark or UniFit canopy line which are fit specific.

Yes if installed properly

We are glad to hear our product will save you and your customer time, money, and hassle! Our solution for Case/New Holland retails for $1599 and includes the 1/2" dual sided scratch resistant polycarbonate windshield and kick panel with all mechanical fasteners.

We currently do not offer side mirrors. The polycarbonate windows are scratch resistant. The doors are made of 14 gauge power coated steel. We currently do not offer an interior panel liner.

The DebrisBoot retails for $699. Here is a link to our webpage to learn more perry-co.com/contact/debrisboot/

@@theperrycompany772 thanks!

Hi Brandon, the door is made to seal 100%. Please give us a call at 800-792-3246 so we can help get this issue fixed for you.

Hi Cameron, we are sorry to hear you are having difficulties installing you canopy. We have made some improvements to the hardware which involved some slight changes to the install since this video was made. If you give us a call at 800-792-3246 we will be happy to answer any questions you have.

Hi John! Yes, the windshield opens just like the OEM windshield.

Hi Robert, yes we will be making uppers similar to our Polaris design. We are in the beginning stages of development and do not have a timeline for when they will be released at this time. Stay tuned for more updates!

Have they made the uppers yet?

Hi Robert, our Can-Am half doors are available now! Head over to our website at fortresspro.com/contact/product/half-doors-defender-max/ to learn more!

Hi, here are the links to the crew videos- Part 1: ua-cam.com/video/aNGuRoqxGRQ/v-deo.html Part 2: ua-cam.com/video/ave3uHeE300/v-deo.html Also if you scan the QR code on the installation guide it will pull up the videos for you.

@@theperrycompany772 wow, that's great, because the Window Tracks were the biggest issue and have slight differences between them, more than the 3 holes.....but that's the simplest way to tell. My Customer was not sent this link when he purchased the Crew Kit, and when I spoke to Tech support they had a hard time understanding what I was asking......... Thank you

If I may, I suggest you print those identifying factors on the instructions as well, it only shows the difference between the top part and that isn't really that hard to figure out, whereas the lower part isn't spoken about at all.

Hi, here are the links for more information: fortresspro.com/contact/product/half-doors-12/ fortresspro.com/contact/product/upper-half-door-attachment-ranger-1000/ If you have any questions please give us a call at 800-792-3246 and we can help you further!

Hi Mark, we normally do not ship internationally because of shipping and customs. If you would like to give us a call at 800-792-3246 or email us at info@perry-co.com or reach out through our social medias we will be happy to try to work something out with you!

Hi Timothy, you can call us at 800-792-3246.

Hi Johnathan, please give us a call at 800-792-3246 and we can set you up with a dealer near you.

Hi Timothy, you can call us at 800-792-3246.

Hi Michael, if the unit has a Lock and Ride roll bar then all of our Polaris Ranger 900 products would fit including both half and full doors! If you have any further question or need help locating a dealer please give us a call at 800-792-3246 or visit us at fortresspro.com/contact/.

Hi Renee, all pricing would come from your local dealer. If you would like help finding your local dealer go to perry-co.com/contact/locate-a-dealer/ or call us at 800-792-3246.

Hi Doug, at this time we do not have a replacement for the KX040-4. It is a model on our list to make a solution for but we do not have a time frame for when it would be available yet. Please stay tuned on our UA-cam and other social medias for the announcement!

We are so glad you are enjoying your doors!

hmm my 2024, 1022H didnt come with a light on the roll bar

Hi Timothy, right now we offer a roof, backsplash, and air bar for Can-Am. We have some new products in development for Can-Am right now including doors. Stay tuned!

Hi Timothy, we also make products for Kawasaki, John Deere, Roxor, Kubota, Honda, Gravely, and Can-Am. Please check out our website at www.fortresspro.com/index.html to learn more.

Hi Mark! We do not have one specifically for that brand but if give us a call at 800-792-3246 we can get the measurements of your mower to see if we have one that would fit.

Great idea! We will try to get one out as soon as possible. Stay tuned!

Hi Keith! Here is the link to the video you were asking about ua-cam.com/video/FvgTzPVQe5c/v-deo.html if you have any questions please give us a call at 800-792-3246 and we can assist you further!

Hi Timothy, we have not yet started development on Can-Am doors yet. Follow us on Facebook or Instagram for more information on new launches and development.

@@theperrycompany772 okay 👍 I will keep Watch it

@@theperrycompany772 I got a question. So how long will it be you start on them. Can am defender's doors. So how long do you think it will be before you start development and you have one ready to sell

@@timothymelius9 We have a few other projects in development right now so the earliest we might have Can Am doors available would be end of this year.

Hi Tim, we are so glad you are loving your doors! The handles can be purchased from your local dealer if you would like help locating a dealer please give us a call at 254-756-2139.

Hi, sorry you are having trouble with the install. Please give us a call at 800-792-3246 and we can have our technician answer any questions!

Yes, everything can be purchased all together. Please give us a call at 800-792-3246 and we can help find a dealer near you!