- 35
- 21 312
Brian Reynolds
Приєднався 6 жов 2013
The CFMoto 450ss gets some underglow
This is what happens when I’m up too late…
I’ll end up buying someone random to install on my bike.
Enjoy the video.
I’ll end up buying someone random to install on my bike.
Enjoy the video.
Переглядів: 76
Відео
DIY Turbo Pit Bike
Переглядів 488День тому
So I decided that the homemade pit bike needs a turbo. After a day’s work, it still doesn’t ride but it runs. Will update when it runs. New project coming soon
DIY Go Kart is down. Scrap pit bike?
Переглядів 1,5 тис.2 місяці тому
With the go kart constantly having issues with the wheels falling off….i stole the motor, sprocket and brakes to build a little pit bike thing hahaha. Enjoy the random build!
Audi A4 B8.5 Wheel Bearing Replacement
Переглядів 396 місяців тому
A wonderful way to start a week. Luckily I had my 450SS to take me to work but I needed to get this done by Friday. With a ton of set backs, I got it done and avoided having to ride in the rain.
CFMOTO 450SS takes on some backroads: KENWOOD STZ-RF200WD Dashcam
Переглядів 1346 місяців тому
Took the 450SS out on a busy weekend. Here’s some Dashcam from the KENWOOD STZ-RF200WD Motorsports... www.amazon.com/dp/B09JZW2HW1?ref=ppx_pop_mob_ap_share Always obeying traffic laws of course.
Almost crash my CFMOTO 450SS!
Переглядів 8276 місяців тому
I took the bike out to get some seat time. A pick up truck decided to pull out right in front of me. I kept my cool but almost crashed again the next turn😂
CFMOTO 450SS takes on the rain: when the weather app lies to you
Переглядів 966 місяців тому
As I usually do….I check the weather in the morning to make sure there would be not bad weather. Well about an hour before quitting time at work…the sky started getting little dark. Checked the radar and boom! A giant storm is right outside the city coming my way. 3:20: First sign of the down pour 8:07: First Wreck 12:50: Second, much bigger crash
CFMOTO 450SS on a little Sunday cruise!
Переглядів 3116 місяців тому
Just threw together a few clips from my post rain ride. Few accelerations, one quick pull and just cruising. Hope ya enjoy!
My CFMoto 450ss and its first mods are already here
Переглядів 6 тис.6 місяців тому
After owning the bike for less than 3 days. I’ve already put on a slip on exhaust off eBay, new tag bracket, usb port, radiator guard and a dash cam. I’ve own the bike for nearly a month and couldn’t complain about anything…yet. By far the best bang for the buck on any BRAND NEW BIKE! Exhaust Mod: www.ebay.com/itm/166511773759?mkevt=1&mkpid=2&emsid=e90001.m164960.l179213&plmtId=700008&mesgId=30...
Turbo Go Kart? Maybe not...
Переглядів 178 місяців тому
I started to work on the turbo project for the go kart...but I will need to build another go kart for that. I do not want to be without a go kart while working on a turbo kit. I did some work on the steering. Always a work in progress.
Final Suspension on Go Kart
Переглядів 59811 місяців тому
I had to change it up again. I moved the steering rack forward and it seems to work well. I still need to weld out everything and figure out a footrest. I can ride it now so that's the important part.
Homemade Go Kart Suspension
Переглядів 21311 місяців тому
So the go kart project has been going well....It just needed to be a little smoother. I have a pretty bumpy yard so I needed something more. As you will see at the end....The whole front suspension has already been changed but that will be in the next video. Stay tuned!
Harbor Freight DIY Go Kart Build Shakedown
Переглядів 65Рік тому
Harbor Freight DIY Go Kart Build Shakedown
Building a DIY Go Kart (Proof of Concept)
Переглядів 122Рік тому
Building a DIY Go Kart (Proof of Concept)
Audi B8.5 ECS Tuning Highflow Cat Install
Переглядів 2,2 тис.2 роки тому
Audi B8.5 ECS Tuning Highflow Cat Install
Carb is meant to have air drawn through it, not pushed through it...if you want it to work properly, it should be before the turbo rather than after it. Of course, if you're not making boost, then it probably wont matter much beyond messing with the A/F richness. Go have a look at Cars & Camera's turbo setups on their carts, if you need more details.
Keep it up 💯
The mixture gets poor when u rev it, that may be bc the turbo is doing some pressure and that's pushing back the fuel in the carb
A valiant attempt :)
I’ll get it working one of these days
Hello there. How are you? Would it be okay if I featured this clip in my next episode. Full credits + notification. Thank you so much in advance!
Yes, that’s fine with me
@@brianreynolds4153 thanks!
Hey there. Itt's me again, sorry for the possible delay and any mistakes. I've used it in my latest episode. Feel free to check it out, thanks!
The video lacks the details that I'm looking for, but do you use the upper rubber bushing on the rear coil over installation?
Yes you use the bushing! You’ll have to use something to wedge it in since it is tight.
What did you use to get the bushing in to the adjuster?
I used a 2 foot pry bar
Hey I know that place! It’s my house! ❤
I run a 17/42 on my bar Raven, and it seems like the ideal setup. Comfortable at 55-60, and still enough torque to top out 5th. Top speed now at 75 mph when pinned 😁
I’ve swapped back and forth from 17/42 and the 38. Depending on where I need to go. I have the 450ss for the longer rides now
@@brianreynolds4153 nice 👍 I wanna get a kpx 259 for my next bike and turn it into a sumo for the longer rides. I wish I could do it with a klx or a CRF, but I'm too poor to afford a new one like I can with the lifan being half the price 😅😅
I have a headache from ur camera
I need to get a helmet mic. Work in progress
Thanks youtube for randomly suggesting more vids of my favourite thing in the world :'D Although, most work on the 450ss/sr I've seen so far is exhaust switching. Am I the only one that likes the stock exhaust sound more than anything else? Sure it's ugly and bulky and heavy but I genuinely like it more than anything else so far.
Nothing is wrong with liking the stock exhaust
BRO COVER THAT LICENSE PLATE BRODIE!
atleast for youtube videos
I thought about that after posting it but my plate is different now. Just went and got a new one in case lol
I like the unique camera angle. Reminds me of Midnight Club :) How do you like the 450SS? I went into to purchase one 2 weeks ago but rode out on a 2023 CLX 700 sport. Basically same price as the 450ss as i got last years model. I love it. Kudos on the great content, keep up the good work.
Looking good 👍.... let's see some Pop offs.....
How do the cams work
What do you mean by cams
@@brianreynolds4153 he probably meant the dash cams in the front&back of the bike
It’s a KENWOOD motorcycle camera and you have to wire the power and ground(my power is spliced into the tag light) and run the camera wires. It comes with an app and you can save video on the app. It does not allow “download to phone” but has an SD card you can pull out and take videos off of
Exhaust Mod: www.ebay.com/itm/166511773759?mkevt=1&mkpid=2&emsid=e90001.m164960.l179213&plmtId=700008&mesgId=3037&mkcid=8&ch=osgood&bu=45543253118&trkId=5be0a628-c03e-3a97-9c88-a43642a0621c&cnvId=700003&recoId=166511773759&recoPos=1 Tidy tail: a.co/d/et62D7Z Tidy tail: a.co/d/et62D7Z Camera: KENWOOD STZ-RF200WD Motorsports... www.amazon.com/dp/B09JZW2HW1?ref=ppx_pop_mob_ap_share
Sounds amazing
I just started riding yesterday. How do you get your shifting to be so smooth? Are you just skipping the clutch when at certain times?
For my bike, I preload the shifter and pull the clutch level just enough to make the shifter engage easily
@@judge831 I’ll give it a try. Thanks.
I feel like it’s hard to shift clutchless. Kinda like something engages when you don’t have the clutch pulled. I haven’t skipped the clutch yet.
Hello! Would it be okay to use it in compilations and maybe on some of ours Social Networks? You will get full credit for it. Thanks
You’re more than welcome to!!
@@brianreynolds4153 Thanks a lot :)
The truck driver was on the phone. lol! They are everywhere! Way to keep your speed in check and aware of your surroundings!
Thank you, I appreciate that. Pretty new to riding so I’m glad I didn’t panic brake
@@brianreynolds4153 You did awesome. It is good to do some quick stop practice to get the muscle memory in place. You may already know this but just saying in case.
Guys like that kill us bikers! Glad you were not speeding and were aware!
I just got done telling a coworker that I’m glad I wanted going fast around those corners. God was on my side for this one
Would you post PNs of things your using? Im specifically interested in the tail tidy and cam
Thank you for reminding me to put links on this video! Dashcam is KENWOOD STZ-RF200WD Motorsports... www.amazon.com/dp/B09JZW2HW1?ref=ppx_pop_mob_ap_share
Tidy tail: For CF-MOTO 450SR SR 450SS 450SRS... www.amazon.com/dp/B0CWDH5345?ref=ppx_pop_mob_ap_share
Hey! May I use this video in my new episode? Watermarked and linked to your channel ofc
Yes sir!!
@@brianreynolds4153 Thank you!
be safe. Your riding environment is very scenic.
Gotta ride like everyone is out to kill me. I do enjoy the country roads in my area!
I plan every shift at 6000 on tach.
The silencer goes between the muffler and the link pipe. Undo the springs and take the muffler off then drop that silencer into the muffler at the hole that meets the link pipe and then put the muffler back on. The difference in size will hold it in the pipe
It just seemed to wiggle in that spot so I assumed it wasn’t where it goes. Ended up using the tighter springs and it worked. Thank you!
keep the vids poppin homie
New edition to your channel... that only has 26 subscribers!! LOL Is that even considered a channel?
get a life
A channel is a channel man, no need to be a rude sack of shit to a nice dude talking about his bike.
@@BasedFK Thank you for taking time out of your exciting life to read the boring comments, then feel the need to fire off. LOL
Just a place to post the thing I do. Thank for watching!
Get yourself a little dead blow hammer or rubber mallet 😂
This helps a lot
Very glad to hear that!
did the rear shock bolt give you any trouble trying to put it in?
It did! I ended up using the jack to lift up on the suspension to line up the bolt
Where did you get the sprocket ?
Here are all the Amazon links for the sprockets I have bought: JT Sprockets JTR269.35 35T Steel... www.amazon.com/dp/B000GTV5U4?ref=ppx_pop_mob_ap_share JT Sprockets JTR269.42 42T Steel... www.amazon.com/dp/B0068O5N5Y?ref=ppx_pop_mob_ap_share JT Sprockets JTF259.17 17T Steel... www.amazon.com/dp/B004DNA0KA?ref=ppx_pop_mob_ap_share
Thanks. @@brianreynolds4153
Actually of course
6 speed or 5?
It comes with 5 gears stock
Sweet thanks
Nice. 👌🏾
looks good
I would not say that because if the suspention travels up the uper swing arm will push on your leg from underneath, One of the bigest problems I was forced to solve, but he really dont even tried to come up with better solution.
Pushing on my leg was not the issue. Bump steer was😂😂
Cool build ..I dig it
Glad you liked it. It’s getting another change currently. I will try to get the video up by Christmas. I have a few more changes before it’s done
Good job! You inspire me to start work on my atv.
YES!!! Don’t let the cold season stop you. Get that thing ready for the summer!
🙌 *Promo SM*
i did all the mods to mine as well 17t front 43t rear, 28mm nibbi carb, and exhaust and ive gotten it to 76 mph but it took a lot to get there. 60 mph is its sweet spot, I have the 300cc cylinder that im yet to install....loving the bike
Do you have the link to the 300cc? I been looking for one but haven’t pulled the trigger
@brianreynolds4153 i bought it off of ebay. I looked this morning but the seller who whole is unavailable. If I find another ill post the link for you
Man. does your gear indicator still work !
Yes! The only thing that doesn’t work is the “N” light.
I live in south jersey and I was able to register mine👍 I use it to commute to work. I did all of the mods and I love mine! Close to 6500 miles already. With all of the mods I have hit 74. 17/43 sprockets Mikuni carb 115 main/22.5 pilot Nibbi coil E3 spark plug Exhaust Running rottella T5 oil Pro taper bars/ grips Fog lights Oil cooler Oil catch can for blow by and a cone filter. ( I don’t use the air box) Better clutch springs It runs great, I have about 2300 into it. Mine is blue 👍 The only thing that I have changed so far is the nibbi coil ($15) I do oil changes every 1500 miles and adjust valves every other oil change if needed.
Have you ever hopped on 295
Yes, obviously staying in the right lane. Staying at 65. I now have 7500 miles on my bike👍
Only on for about 5-10 miles. I normally keep it at 63mph. I have a 45 minute commute at that speed most of the time. I don’t care if people pass me, I can get the bike to 74 but it is screaming and I don’t like to keep it there.. 63 can go all day long
@@keckerson6396 I just brought a tbr7 and I used to live in Camden but moved to voorhees so I really can’t ride her around not having a tag I got a temporary on for now and it has some upgrades to it cdi box exhaust spark plug I’m gonna order a nibbi carb for it and I do have a sprocket that came with the bike but for some reason it just stays at 60 on the gauge and she was screaming
Did you change your sprockets? I’m running a 17/43. The set up is more for top end speed. it won’t have as much Low end torque. But I wasn’t looking for that.
did you notice any performance changes?
No unfortunately not. It sounds better tho! So it’s still worth the time and money.
I remember pulling a wheelie on my bmx as a kid and the front tire fell off!! CRASH!
I hope to very do that!
In the future I will just add the 300cc setup, that would make 65 mph achievable I think with 3- 4000rpms or so. Its only 229cc stock.
I have been looking for a 300cc kit for the Hawk/Tbr7 but can’t find one that is not Chinese cheat. Any recommendations?
@@brianreynolds4153 Bro the bike is chinese, no such thing as a non chinese part for it lol
@@audiomonster303 touché
@@brianreynolds4153 I am more concerned with where to buy it safely, is aliexpress a good site? If so its the place
@@brianreynolds4153 And just so you are aware it only raises it to a true 250cc, not 300. Still worth doing to achieve the extra 21 CCs
Im pretty sure those are just caps on the stock carb that can be drilled out to access the screws?
I did put bigger jets in. I believe I have a 32 and a 115 in it. It’s a cheap Amazon carp
I should have said I bought an Amazon aftermarket carb
just got one on order, should be here next week! keep the updates coming it helps us Tao owners know what happens when mods happen! And what mods to or not to do
Let’s go!! Get the sprocket (front and rear), new carburetor and you’ll be ready to go
I like the stock sprockets, the road I will be driving is 0nly 35 mph. I just plan on fishing, and collecting elk sheds and riding trails no highway. Luckily I live in the mountains already! @@brianreynolds4153
the catalytic converter light is on on the screen, i changed it, does it go off?
Unfortunately I will forever have a check engine light
@@brianreynolds4153An O2 spacer might work
You need to tune your car after throwing on a high flow cat. Tuning it will turn the check engine light off and will properly flash your ecu to the proper modifications. I have a b8.5 with a HFC and a stage 2 tune and I don’t have a check engine light
Good vid bro, any other mods done?
Not really. It’s got a lot of miles so it’s not worth spending the money on. I will probably do suspension soon since it’s pretty old.
What front sprocket are you running?
Sorry for the late reply. I have a 17 tooth in the front. The 17 does not have clearance issues but any bigger will
@@brianreynolds4153 I'm runny 17t front and 43t in the back. Seems to work very good
Bro what build is that
I honest don’t remember but it’s a reward gun
thank you so much for this . i’ve been looking for more videos on this . i have a a5 b8.5 and i just ordered the ecs HFC and downpipe . this was really helpful
Glad that you enjoyed it! I haven't made many videos on the Audi but I will be trying to get some more posted. I also recently bought a TBR7 so some videos about that soon too.