Got my driver side bulb replaced but the passenger side is 10000x more difficult. Am I doing something wrong? Is there a different method for the passenger side headlight bulb??
Thanks to you I completed the job.My only problem is that my car sounds like a motorcycle now lol.Do you have any idea what could be causing my car to make these sounds.
I'm about to throw away my 2005 ALtima for 2 things: This is one of them, and the other is if your battery is COMPLETELY dead in the winter and you want to access your trunk to get your freaking jumper cables out you are unable to do so because THE TRUNK IS ELECTRONIC only NO KEY OR BUTTON!
Hello! And thanks for the great video. May I ask, I have a 05 Altima as well but my passenger low beam side is out not the drivers side. Before I saw your video I saw one for this car on the A1 site and they literally were saying to remove the entire bumper, take off wheels and so on. Yours is obviously more for me, I’m not as skilled as you and wondering if the passenger side requires the same or more sockets? I have the 10mm one. Also the air filter is not on my passengers side it’s in the drivers so is there anything else I need to know or do for the passengers side? Also, I have a little silver box towards the front of my car near where the radiator is and says halogen, my lights definitely are halogen cause I see a difference. Is there’s anything I need to know for that? Sorry for long comment but thank you very much in advance. 👍🏻😀
At the auto shop, they put the car on the lift, stand under it, and replace the light. Its much easier the way. Thank you for the video, 0oPRYMEo0. Well done.
Thank you for making this video 0oPRYMEo0. I just now succeeded in quickly replacing my driver-side bulb. Your video was very helpful to me and I am so glad I decided to look for an easier method before starting on the method recommended by a certain well-known auto how-to guru which shall remain nameless. Thanks a bunch.
Ok yes your video helped but you forgot to mention that if for some reason the bulb doesn't work its because you might have to check and see if the fuse is good.which is what I had to do and whalaaaaa it worked.
I hate changing these bulbs, An idiot design that. I will not buy another Nissian just because of that. Took me 15 minutes to remove all that crap in the way and 1 hr 30 min to get that dam bulb in there right. The 2004 is not easy to take off. It has that spring, but the both part is different.
Thank you for this money saving video! I can't believe I am doing this again! I just replaced, both bulbs barely 1 year ago, and the drivers side low beam went out again. I am angry; one because these bulbs aren't cheap, and two because it is a pain to do. I am disabled, but refuse to pay a ridiculous price to have it done. ❤❤❤
I replaced my drivers side low beam headlight. Now the beam is point up compared to the passenger side. I took everything apart and put back together and it is still aimed high. Any suggestions?
Thank you for the well done video. We were able to save lots of money and have the satisfaction that we did it by our selves. We changed it after your video in less than 15 minutes.
All that too change a bulb? Sorry but nissan is retarded as shit too design something that ridiculous... I say don't buy a nissan.. I know someone that was working on a suv it was a nissan but a newer year, they had to unbolt the frame to the engine then they had to jack up the engine or was it the frame don't remember but he had to do all that just to get to the altenator .. nissan does that so people can't work on their vehicle themselves so you have to bring it too them to spend thousands of dollars why not sell a vehicle so everything is easy access and then be able to sell alot more vehicles ? See when I look at a car I look for the starter the ac compressor altenator if it's not easy to get too I won't buy the car
Thank you for taking the time to make video.
Thanks this helped me out a lot compared to the other vids
thanks brother that saved me a day and a half
The little Tang yeah you should have just released that from the little nub
Got my driver side bulb replaced but the passenger side is 10000x more difficult. Am I doing something wrong? Is there a different method for the passenger side headlight bulb??
thanks this saved me a lot of time. it works for a 2002 Nissan Altima 3.5
thanks pal . couldnt of done it without U .
Works for 2004 maxima also
Yeah broke one of the pegs trying to pull the air filter housing out, what a stupid ass design
Great job!
Thanks dude... This video was a huge help!
Does anyone have the information for the bulb that’s used? I don’t wanna go to Autozone 3 times back to back trying to get the right one
Thanks to you I completed the job.My only problem is that my car sounds like a motorcycle now lol.Do you have any idea what could be causing my car to make these sounds.
Selling my 2005 Altima because of this poor design hit me upp
I'm about to throw away my 2005 ALtima for 2 things: This is one of them, and the other is if your battery is COMPLETELY dead in the winter and you want to access your trunk to get your freaking jumper cables out you are unable to do so because THE TRUNK IS ELECTRONIC only NO KEY OR BUTTON!
Jonah Jameson Open the car manually with the key and unlock the doors from the inside. Bring one seat down and u should be able to acess the trunk
Hello! And thanks for the great video. May I ask, I have a 05 Altima as well but my passenger low beam side is out not the drivers side. Before I saw your video I saw one for this car on the A1 site and they literally were saying to remove the entire bumper, take off wheels and so on. Yours is obviously more for me, I’m not as skilled as you and wondering if the passenger side requires the same or more sockets? I have the 10mm one. Also the air filter is not on my passengers side it’s in the drivers so is there anything else I need to know or do for the passengers side? Also, I have a little silver box towards the front of my car near where the radiator is and says halogen, my lights definitely are halogen cause I see a difference. Is there’s anything I need to know for that? Sorry for long comment but thank you very much in advance. 👍🏻😀
Your utterly appealing to me by the sound of your voice. Lol
I swapped in led took off the ground thing the led blew out now I can't install regular bulbs FML
I started crying when i put new bulb in. Live in my car alot. You made it so easy for me. I really appreciate it.
Anyone knows what size bulb is it?
Hi, great video, I wonder if you could post a link to that bulb I order it through EBay and they sent me the high beam light , I can't find that one .
Your video says headlight. Your replacing the bulb. Get it right.
Thank you sor
At the auto shop, they put the car on the lift, stand under it, and replace the light. Its much easier the way. Thank you for the video, 0oPRYMEo0. Well done.
This is fucking ridiculous
Thank you for making this video 0oPRYMEo0. I just now succeeded in quickly replacing my driver-side bulb. Your video was very helpful to me and I am so glad I decided to look for an easier method before starting on the method recommended by a certain well-known auto how-to guru which shall remain nameless. Thanks a bunch.
Just wanted to state thank you for this video, it was huge help for myself & my father to change the driver's side low beam bulb, thanks again.
Thanks!
Shittiest camera skills on the planet
Very helpful thanks!
Ok yes your video helped but you forgot to mention that if for some reason the bulb doesn't work its because you might have to check and see if the fuse is good.which is what I had to do and whalaaaaa it worked.
Good video
thank you!
Great...how about the other side now?
I hate changing these bulbs, An idiot design that. I will not buy another Nissian just because of that. Took me 15 minutes to remove all that crap in the way and 1 hr 30 min to get that dam bulb in there right. The 2004 is not easy to take off. It has that spring, but the both part is different.
Thank you for this money saving video! I can't believe I am doing this again! I just replaced, both bulbs barely 1 year ago, and the drivers side low beam went out again. I am angry; one because these bulbs aren't cheap, and two because it is a pain to do. I am disabled, but refuse to pay a ridiculous price to have it done. ❤❤❤
Can't you just take the whole light out i have a 2006 nissan altima 2.5s
I replaced my drivers side low beam headlight. Now the beam is point up compared to the passenger side. I took everything apart and put back together and it is still aimed high. Any suggestions?
Wow!!! You're the man!
Thank you for the well done video. We were able to save lots of money and have the satisfaction that we did it by our selves. We changed it after your video in less than 15 minutes.
Whatever happened to the old way where you just removed it from the hood? Now its like doing open heart surgery .
ppl
thank you so much. I just changed my light and it was so easy because of this video
it's easyer to go through tire wells on both sides , turn wheels out , unsnap well covers buttons. and it's right there
Thumbs down for misleading title, you're changing the lamp NOT headlight
Thank you! big help!
Great video on the driver's side headlamp. I thought i was going to have to unhook the bumper cover. This was a simple fix that only took 10 min.
you are good I gest
All that too change a bulb? Sorry but nissan is retarded as shit too design something that ridiculous... I say don't buy a nissan.. I know someone that was working on a suv it was a nissan but a newer year, they had to unbolt the frame to the engine then they had to jack up the engine or was it the frame don't remember but he had to do all that just to get to the altenator .. nissan does that so people can't work on their vehicle themselves so you have to bring it too them to spend thousands of dollars why not sell a vehicle so everything is easy access and then be able to sell alot more vehicles ? See when I look at a car I look for the starter the ac compressor altenator if it's not easy to get too I won't buy the car