Відео

Just got the WM 425 'Plus' today. When I looked at your 70's/80's model. I thought it was from a different planet!! The new one is flimsy, and the metal is thin. It wobbles..(a bit) . When the wood is clamped, the clamp adjusters wobble?? So much I could harp on about. It's just darn horrible that the company merged with Stanley just to save a few lousy pence. I hope B&D's company executives see this video and it humiliates their manufacturing 'pride'.

Very good review❤ Just saw one on Marketplace to far for pickup $40.00. Ill be looking. Liked that you conpaird the metal fram and welds!! Not worried about a piece of wood. Ill be hunting one. I was originally looking at making one from running machine pars but at $40 and more compact... I always thought these looked flimsyMy bad!! Great review!

😮❤

where did u find the camera? honestly i cant find them . in the page if out of stock :c

I fit ski boots and running shoes for about 5 years. Your version here reminded me of it. There is something boot manufacturers would do to their toel/heel plates of pre-molding the heel strike and toe off curves. This is wear that happened naturally from walking, but it came like that from the factory. Those are also the areas you see the most wear on shoes. Outside heel strike leading to inside toe off. Now a ski boot's primary function isn't walking, but it does have the clip-clop stiffness of that base you have. In some running shoes, manufacturers would add wedges of firm gel to the outside heel. This was preferred over pure foam in that it didn't breakdown almost at all. I would think these two ideas could married to get a more walkable foot that still has some resistance for standing. The commercial iterations for these stilts I've seen look to be very focused on walking - having a noticeable rocker profile. These stilts also have the common complaint of not being comfortable to stand in. A passing thought, that's all.

I bought a 79001 type 2 at a yard sale for $5. Appears never used. No scratches on the wood. Yes a tank.

Can't see anything. Useless.

Literally just found an old 400 from 1991 for 60 dollars. Its a time capsule still in its original box.

Thank you for taking time to share your thoughts. I have purchased 2 and also bowden tube thingies. Living in Florida humidity is high and it does not help any that I also have massive amounts of aquariums so having something like this will benefit me tremendously. I will be airing on side of caution and apply all your recommendations.

If Ricky Schroder & Joshua Jackson had a son.

This was a useful and candid review. Material was well presented and "snackable", nicely done!😀😀

If a person uses it on it's side, you can put a solid thin board to make the bottom of the shelf solid so things slide in and out smoothly. Real nice crate! Thank you for the assembly demonstration🙂.

Here's a great video that explains Methyl Bromide (MB) and the dangers. Definitely worth a watch. ua-cam.com/video/4IblRBJMh-k/v-deo.html Great video and thank you for sharing. You have a new subscriber. God bless.

Turned off video due to awful music.

What grit belt were you using

I saw a comment that said you used 80 pallets. Why am I only counting about 30 or so in the video. Am I missing something?

Fantastic video, very informative, thanks for such a great walk through. Would love to see an update on them, or even the costume they were built for 👍

The problem with America not making anything anymore and American jobs leaving is not government. It's us refusing to pay more for something worth having and going to harbor freight to buy a $13 hat het made by sweatshop labor.

Excellent review!!

I got one of these saws about 10 days ago through Lowe's. Ran into a problem. I have checked all the major retailers, Lowe's, Home Depot, Menards, True Value, Ace Hardware. No retailer stocks a 72 inch blade for this saw. Of course it can be ordered but that doesn’t help if you break a blade. Can’t just go pick one up and your project is delayed for at least several days. Has anyone found a solution to this? Thanks. The window for returning this saw will be closed in a couple of weeks. I prefer to keep it but not if blades are going to be this difficult to find.

Anyone knows why mine keeps getting restarted or shutting down for no reason?

Very nice. I've got a access to rather new free pallets. Hopefully my hoa don't give me beef about this.

Damn that jacket is awesome!

What blade would you recommend for this unit? Best all around not super expensive

Just picked it up for $69.99

Very well explained brother I will recommend a remake with a microphone maybe so the audio is clearer Thank you for sharing

I really enjoyed your pallet wood adirondack MK2 video. Do you have detailed plans for it available or shop notes? Please let me know. Thanks ahead of time.

Very informative. Thank you.

What a time waster shut the F up and get on with it!

I ordered one and it should arrive tomorrow. How do you feel about this dryer now that its almost 2 years later?

Thank you 🙏🏼 from Sydney Australia, for your video I would love you to show us how to replace the bearings, my is starting to show a slight wobble and I replaced the blade thinking that to be the cause with no luck 🍀 so I am suspecting it’s the bearings Cheers and Thank you 🙏🏼 in Advance

Why is it necessary to show clean upwork and commentate on it?

Thanks for the review.

Thank you for your review. I just bought this and noticed it got rave reviews online.

FYI the average cost of a single M67 grenade is around 45 US dollars, you can wreck all those pallets in genuinely 7 seconds... just saying.

MY LIFE IS COMPLETE THANK YOU ive been needing to find a video that has the stilts similar to my design idea, tysm for making this, love it and good job ❤

Thanks from Albuquerque

I've been having an issue recently where the printer keeps going into recovery mid print, is this an error you faced too and if so do you know how to fix it?

Hi! Where did you buy the M6 nuts and the blue tube for filament?

I was hoping how to use it.

What is the name or type is your bandsaw please

Good job and project thx for sharing Cheers

Found this video looking for one of these tutorials from under 6-7yrs ago and love the end result of this and you going through the troubleshooting at the beginning with your first go at this project. Also thanks for explaining why you chose steel over aluminum rods as an older tutorial similar to this one said aluminium and I don't weigh much more then 100lb but I wanna make a pair of these for a full costume and that will definitely bump the weight up, so better safe then sorry always ^^' Also, if ya still read these comments, please let me know if you have an eta for any new video on these projects that's not a timelapse, I can probably slow down the playback speed to help a bit but I'm afraid that make make the building section of the video pretty choppy and I'd love to try your modified method after doing this twice and finding a way that feels right to you without stuff like extra knee padding (though I plan on adding just as an in case measure for longer useage time) so thanks for this and thanks for your time, this was informative

What do i set the regular at for filling car tires just topping them off? Mine didnt come with a manual

I'm not familiar with the collapsible baskets, but I was wondering if your display would still work, if the baskets were zip tied in an UPRIGHT position. Then you could put your key rings inside it, without them falling out, and you could just pick it up when you are done. Great idea, thanks for sharing💡

Giving your wife something u want for HER birthday..deep down she don't want a axe for her birthday..YOU would like that gift!! Let's hope she don't follow suit an get you a make-up kit for your birthday.haha..nice job on the axe

dude, the best part of the video was the music. It was long and completely unnecessary with all that wood used. You could’ve made it much easier with using longer planks instead of all the shorts bits.. Looked okay in the end, (excuse the pun) over kill.. 😂

Great project. What is that liquid you wiped on towards the end?

There’s drift because your blade guide is all the way up.

When you actually research the treatment of pallets you will find the even the HT treated pallets can also of received a MB treatment. When an inspection of a container is done and there are signs of critters they will treat every thing in the container with the MB treatment this means your HT labeled pallets, the good thing is that the chemical treatment dissipates when exposed to air. MB pallets are no more dangerous than HT pallets. The MB pallets are extremely rare though.You should properly mill all pallet wood to remove the exterior sanding planing ext to remove all the filth that can get onto them while in use. Please do more research than UA-cam.