Відео

Your videos leave a lot to be desired

How did you get the heater pipe out our the housing after removing the bolt?? It there another bracket holding it ??

Nobody know what the hell your working on or doing.

Crackhead videos. Can't see or understand nothing waste of time

Completely useless. Stop doing this bullshit

Cant see anything your doing stop making bullshit videos whats the point.

What were the symptoms so you decided to change the EGR valve?

Was it leaking ?? Do you have to remove the intake ??

Its only 2 bolts holding it?

Can u slow it down and show me exactly where the egr valve is at?!! Plz?!

How did u remove that line on the top left corner of the video

Where are you located will you do this for me for a price $?

Hello, I was wondering if you could help me or give me some pointers to try and fix this light issue I have. I got the OmniPL retrofit kit and installed it on my ProLogic panel and everything works great except the lights… when I turn them on they turn on for about 10 seconds then they turn off and stay off. I tried different shows, fixed lights, modes (UCL, CL 4.0 etc) and it does the same thing. What could be causing this? I followed the instructions to a T. Also, when the lights turn on they always turn on to a dark violet/pink color and nothing else, I hit red, blue, green, white and none work… only the violet/pink color. Also, my lights are ColorLogic 4.0. 2 pool lights and 2 spa lights, appear to be all wired to the same relay. Any help/advice is greatly appreciated. Thank you

What year?

What’s the name of that boat the new one and how much it cost?

Worst video ever. Stick to the point

Good video series.😊

So it’s just better to buy a whole new housing?

Was this on a 5.7?

Does this kit come with the transformer?

great information what were your symptoms

For the record today is Wednesday November 21st 2023 and the light is still out and no problem passing inspection…so for a 2005 dodge 4.7 v8 bought brand new to date I’ve only had to reply one a/c blower motor and it was about 50 bucks one 02 sensor which was like 20 bucks and one egr valve that was about 50 bucks …so 120.00 dollars is all I’ve had to put in to this dodge Durango in like 18 years …so it’s safe to say for a suv it was a good choice

Thank you for pulling the camera back to show me that you took your cowl panel off. I was wondering if that would make it easier and it looks like its a "yes"

Yep and it’s going on 150,000 now and the a/c is still pumping all original other than I replaced the blower motor …Texas Humidity

Hi thanks for posting. Were you getting a P0058 error code?

Can't hear you or understand half of what you're even saying. Between your heavy breathing and all the other clanking around, I don't know which is worse. Just my .02

thanks alot, i installed my omniPL a few days ago and you are correct, my color logic 4.0 worked fine as soon as i got the PL system up and running, easy replace for my old aquaplus, Love the system, nice on the phone with wifi. I put a new transformer in also ,just to have everything new as mine was 8 years old, and looked a little burnt. Thanks for all your help, and you are right love this new omniPL.

HI, can you answer a question for me please? I have the hayward colorlogic 4.0 lights 2 of them, one at each end of pool. I have the aquaplus controller , it controls my lights now, in the omniPL instructions it says (If the control is using networked colorlogic lights, the lights must be put into "standalone(default) mode before disconnecting the control). Or do you know if i would have to do this? Been looking everywhere. Oh by the way nice video, thanks for doing this. helped out alot!!

Damn bro your 05 is way different than my 07

THAAAAAANNKKKK YOU!!!

Thanks for the video bro. Much needed

Thank you for posting this video. My 2011 has the same stains on top of my transmission housing. Is that where you leak was from?

Dude! You're crackin me up. You seem like a good friend to have a beer with. Anyway, thanks for taking the time to make these. I'll be referencing em this week later when I do my PL upgrade for the same reasons.

Holy shit bro I was looking for egr tube and I was wait a dam minute 🤔 why the fuck does it look like he has so much space to work with? Then I realized u took all shit off😱. I know u were not trying to do all just for the egr🤣. I manage to replace my EGR without removing all those extra stuff and sucked. Good shit man.

You showed 2 nds of where it's at and not how you got to the bolts. Real helpful... Stupid video

Fuck I'm bout to do this shit rn

Sounds nice. I think I’m the only one who’s EGR has T45 bolts . Son of a B***h .

Your egr have the T40’s ?

If your watching this ..I programmed it in and it is a dynamite system ..I will do more vids ..we had to put a new deck in and cut the manifold for all new valves ..but it’s a killer new board

Also check the installation video I did on the egr valve and show that bottom gasket down and in place ...people tinker and talk chit about removal but they never show you how it goes back together and if the light went off and stayed off...and yes it’s still off

Hey guys if you look on the rest of the Vids ...you can see that those bolts were rusted in there good and the breaker bar was also to help stay level as you tork insuring not to strip or break the bolt

Какой слой защиты нужно иметь чтобы защитить себя от радиации?

This video is the new thermostat housing assembly installed without the thermostat in yet ..it’s a three step process after you remove back plate sponge snap pins holding the wiring harness and some vacuum lines and covers to access back of motor ..The black backing plate and sponge slide down and to the left to remove them towards the the passenger side than remove bolt from radiator coolant line attached in thermostat housing assembly just let it drop do not remove ..Than unbolt thermostat housing assembly 3 bolts and take out with heater lines attached ...everything slide out to the left ...the bolts removed attached the radiator coolant line and heater lines are used to counterbalance for reinstall ..replace Gasket and O rings on all parts ...it can be done but no one would touch it ..there are a total of 12 bolts that get removed a 15 13 and 10 mil sockets with extension and swivel sockets needed ..I used a 3/4 inch plywood to lay on top of to make it more comfortable working from the top ... I wish I had videos the whole process but it took me three times to do as there were no vids yet to help but after just doing thermostat than heater gasket and O rings ... it is the black 1 1/2 inch approx.. O ring seal on the assembly that is on the inside of the thermostat housing assembly that was faulty...🤠

Whippets always rob my heart ❤️ ❤️

I find it simply amazing how people can troll world records without proof...we sought out all comparisons and found none this size... we should have called the Texas State records but he said dad the record didn't mean that much it was a blessing to catch one with a light test and release it back to make bigger ones for the next generation to enjoy to catch......post pics and proof before commenting or a video of you!!! Not someone else ...This is a secret spot just off the Trinity river ...you have to hike miles in brush just to get there through snakes and bores ...your not on a boat sucking on beer

Your dreaming where is the pic ...my son is the greatest Texas fisherman in the state ..he landed it without a bow...and he released it...it was 6' easy

No record it's big but not huge I've caught 5 ft long nose and they wernt even state records

I've caught one twice that size

were did you get the windying wheels