- 7
- 12 857
Roel Asedillas
Приєднався 17 кві 2018
Canon 80d w/ 18-55mm f4-5.6 Kit Lens Video Sample + Cinestyle
This is my very first DSLR camera. This is a sample of Canon 80D with 18-55mm f4-5.6 kit lens in 60fps Slowed in 40% and using Cinestyle from Technicolor, Using a LUT from Da Vinci Resolve 15
no regret from having it in this year since it was released more than 3 years before. it still the best for me for over all application even though there is no 4k at all.
but why not 4K camera?
I just realize that 4k is not necessary co'z not every audience has a 4k Monitor. hahaha
no regret from having it in this year since it was released more than 3 years before. it still the best for me for over all application even though there is no 4k at all.
but why not 4K camera?
I just realize that 4k is not necessary co'z not every audience has a 4k Monitor. hahaha
Переглядів: 1 407
Відео
Zoom G9.2tt John Petrucci Drive Tone in Another Day
Переглядів 3,9 тис.5 років тому
#DreamTheater #G9.2tt #Ibanez RG350DX with Herman Li DiMarzio Fusion Edge. Compressor/Sense=2/Attack=Fast/Tone=8/Level=80 Wah EFX1=off EFX loop=off ZNR/threshold=5 or 4 for more sustain PRE AMP/PV Drive EQ/Bass= -12dB/Low-Mid= 0dB/Middle= -4dB/Treble= 2dB/Presence= -1dB/Harmonics= 0 CABINET/Mic Type= Dynamic/Mic Position= 1/Depth= 2/ (this module is for direct line recording) MOD EFX2=off DELAY...
EAGLES Love will keep us alive (all in one Cover)
Переглядів 665 років тому
just trying to sing even if I'm not a singer. hahah
Instrumental in Scale of A MAJOR/F#minor
Переглядів 655 років тому
this is my own arrangement copyrighted by R.A. RECORDS
Zoom G9.2tt Guitar Effects Console (Repair)
Переглядів 7 тис.5 років тому
Replacing Malfunctioned Tactile Switch of PRE-AMP, CH A/B, STORE/SWAP button I dont have a desoldering pump, sorry for that. hahaha
Hotel California Cover
Переглядів 575 років тому
Just a test of my equipment's using Mixcraft 8 Pro Studio
Hallelujah worst Cover
Переглядів 976 років тому
just to have fun with this gadgets and instruments that i have.
It's still a great unit and does NOT need a computer to be so. I never needed any damned software to EASILY tweak mine to exactly what I wanted for a really GOOD result.
Systemver 1.07 como resolver
Amigo minha g9 estava com mau contato e mandei consertar e voltou pior agora nem liga o display. O camarada falou que mexeu no cabo flet e percebi que está ligado no mesmo lado do cabo. Pergunto se o cabo 24 vias é colocado invertido ou nao?
Ayúdame hope
Ayufame mi g9 no prende solo las vavulas se encienden
A minha ficou assim hj conseguiu ajustar a sua?
My G92tt is not storing new presets anymore! Can someone tell me what is happening ?
Mucho ruido !!!
nag rerepair kba sir nag aauto save kasi ung sa akin bigla ska nag lilipat din bigla ng pacth #2
Bro ano ang tama pag Systemver 1.08,,stanby lng sya ,,di na magamit eh Binuksan ko nagiinit ung dalawang regulator nya,,TA79012S at 7812a Pero my mga output pa rin nmn na 12v
Ano power output ng adaptor mo?
@@RARECORDSPH 15ac
Sir pag 18ac output ng adaptor ko.
Hello, do you know if there is any way to bypass the tubes? i'm broke and can't afford being changing them anymore. Any advice will be much apreciated. Thanks in advance
hello, one of the buttons of my console is not working, button 2 actually. any tips on how to fix it?
I still have and love it)
Excelente gracias por el patch
Amigo. Hola. Tengo un zoom del mismo g9.2tt. Pero no prende. Nada de nada. No he podido encontrar quien lo arregle. Ayuda!!
Hi! Which switch did you use; 6x6x4.3mm or the 6x6x5mm?
Rumerepair parin ba kayo sir?
ano po ba sira?
@@roelasedillas7912 pag e try mo syang E ON talagang nag o-ON sya pero pag ekinonekta mo na sa guitar at amp di sya tumutunog
Thanks for posting. Damn Zoom for using cheap switches in their top flight pedal. Is it all still working after this time?
What the fuck is this video supposed to do for anybody?
Just to fuck up with someone who ask for what supposed to do for anybody hahaha
Where do you get spare part? I am looking for the bottom cover.
Do you have tutorial for changing lcd module of G9.2tt?
Hola amigo, se quemó el transformador eléctrico de mi G9.2tt por cortocircuito. Compré otro de 15v y 2A y enciende pero no tiene sonido y tampoco funciona el afinador cromático, por lo que el problema debe ser en las entradas. He leído varios post con el mismo problema sin ser solucionados. Al parecer no es un problema de las válvulas 12ax7, sino en el circuito electrónico. Tienes alguna idea? Translator: Hello friend, the electrical transformer of my G9.2tt burned out due to a short circuit. I bought another 15v and 2A and it turns on but it has no sound and the chromatic tuner does not work either, so the problem must be in the inputs. I have read several posts with the same problem without being solved. Apparently it is not a problem of the 12ax7 valves, but in the electronic circuit. Do you have any idea?
Nagaayos ka dn b ng lcd module ng G9.2tt?
Hi there from Australia! Do you have the part numbers for the replacement switches / parts that you used? My foot switches are faulty as well.
It was a tactile switch from amazon. I will try to recall my order in amazon and message you later.
My pedal can't save anymore plus I can't turn the znr off anymore
Sir good day pwd po mahingi ang fb mo may ipapa tingin lang sana ako
*Olá sou brasileiro quero te perguntar quando a pedaleira fica com chiado muito alto e quando aumenta o volume cada vez aumenta mais o chiado o que deve ser isso me responda fazendo favor*
Amazing patch and playing. I've just got a g9 and going to put 2 new JJ12AX7's in it. It sounds so good.
Hi plz Help My zoom g2.1u Works 5 mnt Aft tht ....Resistor 3.3ohm 2W & Zoom FX-3 main Ic Heating How To fix it ???? Plz reply
check the compatibility of your power supply if it was replaced the original adaptor
@@roelasedillas7912 don’t hv Original zoom Adptr But It is compatible 300 mah 9V adptr .... it is bcz of Original adptr or 3.3v Low voltage 3 pin ic ?
@@sv0205 it is normal to turn up the temperature of the resistor unless if the transistor or that 3 pin black chip was broken in some power surge it needs to replace the IC in same specs. but before you do that check the power board if there is bad parts
@@roelasedillas7912 1st of all thnx for helping me..... & 29M33A (3 pin 3.3v low voltage transistor ic ) it is unavailable online or any store Plz Suggest Me Any other ic which is easily available online.... & for now m using 5v Samsung charger connected in Place of Batteries & a piece of heatshink Glued on top of main zoom ic for reducing heat ........ for Temporary Use
Ha ha I have the same prob. Where to get the replacement switch?
available at amazon
6x6x5 mm 2 pin momentary tactile switch
my pedal-1 just stopped working mann can you help me and i just shifted the volume control to pedal-2 help me mate:-(
have you tried to edit the pedal panel function?
Hey my param 1 knob is misbehaving...if i increase it,it goes the other way and decreases... what should I do?
replace the potentiometer of it
Great video, is it hand held.
Hello can you help me? My G9.2tt zoom pedal is constantly changing by itself to the Tuner bypass and is not having any way to touch ... Thanks
same problem mate. tactile switch is very fragile parts of g9.2tt it needs to be check and replace. i did it 3 times since i bought mine 2 years ago
@@roelasedillas7912 ok I'll check, thanks
Pwede maka hingi ng link nung tactile button or size, thank you
6x6x5mm yung size nya sir sa japan amazon ko sya nabili but available naman yan anywhere here in phil. electronic shop near you sir. just ask
@@roelasedillas7912 hello sir san kaya pedeng maka order ng lcd ng g9 malabo n kc sakin eh,,matagal n hindi nagamit ,,,thanks
hello, how can you replace the tubes?
use desoldering pump and soldering iron to remove the solder in every tip of the tube then replace with a new one
de donde eres amigo me gustaría que me ayudaras para cotizarte un arreglo a mi zoom g9
Soy de Filipinas, si tengo la oportunidad de ver el problema de su dispositivo, lo ayudaré, pero desafortunadamente estamos lejos el uno del otro.
Les hago una pregunta ! Las valvulas realmente funcionan o estan de adorno nada mas.???
@@horaciomontano6409 claro que las válvulas funcionan de una manera que el tono de guitarra sea el que buscas claro está después revitalizar tu efecto y tu cabina y lo demás que le tengas mira en el manual sólo la parte de las válvulas del ACCELERATOR Y ENERGIZER es más hay otros tubos marcas y calidades que en ocasiones aclara la señal o hace lo contrario según los gustos
Faz revi dessa programação de timbre da g9
Caraca Mano que som massa dessa g9 Mano
Sir pde magparepair ng line6 hd300
nasa japan aq now sir. im very sorry.
Roel Asedillas matagal tagal ka p yata jan sir
october pa po balik ko pinas sir @@jeromebiscocho7242
Sige sir salamat 😊
Amazing patern bro 🤘
thanks for watching bro. rock n roll
🤘
Patch please
i just edited the description above sir, thanks for watching and asking for it.
patche please
i just edited the description above sir, thanks for watching and asking for it.
+Roel Asedillas thank bro
galing mo pre.
salamat pai hehe