Відео

@@pezjohnson thanks!!

Glad to. Thanks for watching and commenting.

@@MRNBricks thanks. Yep, aware of the alcohol being a solvent… gotta be careful not to go too far. If so and all the through clear coat, the color would show up on buffing rags.

I really like adding the OCD boards. It can be a little pricey doing both the GI and controlled LEDs, and the effect is kinda subtle but over a long period of time, it’s so much better having the lights operate smoothly w/o all the flicker.

@@mazzg1966 thanks buddy! This is such a great project. It’s coming along one step at a time. End result should be a really nice game with a LOT of good play ahead.

@@jason_hundley more to come Guido! We’ll fix that green area later. On to standups and more. Stay tuned.

Thanks. I think the PinDoc and I will revisit the little green area again. But for the most part, the rest of the playfield looks good to go.

It definitely looks a lot better. You can tell if you look for it, but overall way better than big areas of missing paint.

Thanks and good tip on the tite bond.

Thanks! Next episode I’ll show how the clear areas turned out. I’ll video as I do some buffing. New drop targets too in the next video.

Haha… well, it’s coming along. Aside from the drop target work, next up is going to involve blending out the clear coat from the repaired areas into the rest of the playfield. I’m really happy with how the stenciled area turned out. The lettering looked pretty sweet.

@@LeebosPinball I agree!! Totally pleased.

@@jamescrowley6549 most of the parts I bought for this game were from Pinball Resource.

@@pezjohnson it does wonders. Great tool to have for a lot of metal pinball parts. I also use Mothers Mag and Aluminum polish after polishing on a buffing wheel to further bring out a shine and smoothness (then wipe off residue with rubbing alcohol).

@@mazzg1966 Thanks a bunch! I try to keep the videos around 10-15 minutes so they don’t get too boring, plus it keeps up with the highlights of what I’m working on. Not only that, but every video I capture and process is on an iPhone and iMovie likes to choke saying I’m low on memory (when I’m far from it). Hopefully in time I’ll have that fixed. ;-). Thanks again for the kind comments!

@@chuckufarley5884 very cool tip! The problem mostly went away but on occasion would surface. The owner found another problem in the coin door I missed and I think that may have fixed it. Dunno the details but I think it’s playing fine now. Good tip though; thanks for passing along. I’ll let the owner know.

@@jason_hundley progress has already started! Next video should be interesting.

@@dce21b59 shhhh… I’m his lost, crazy twin brother addicted to pinball. ;-)

Yeah, it’s a challenge for sure. There are some games I’ve come across that are just a bit too wide and I prefer a little tighter gap. But, that’s part of it and part of the time period I think. Still a basic yet very fun game.

Yep, the coil had a major meltdown.

@@mazzg1966 thanks man!!!! Happy July 4th to you too!

@@Experternas yes, all three great games! That Radical there is quite awesome. The guy that restored it is from Italy; he brought it to the Chicago Pinball Expo last year before it landed at Past Times. The detail involved is nuts. I happen to own a Junk Yard (actually my sons). It’s apparently one of the few early production games that has an electromagnet under the wrecking ball, though I don’t know that the code ever energizes it. Very fun game.

That radical is literally one of the best in the world. It was professionally rated after its restoration by an appraiser. It has the highest rating possible. Even if you are not a fan of the game it is worth checking out.

They take amazing care of their machines. While they are open to the public thurs-sunday, they are still doing maintenance on the other days. I wish I lived closer as well. I am 75 minutes away, but I still try to drive down once a month. It's a great place to visit even if you are not a big pinball fan.

@@BootsORiley Awesome!!! Thanks man

Those stupid ass horse shoe contacts. They need constant cleaning or adjustment

Yep. I’m sure they are. Went down that road on my own Firepower and after hours and a lot of parts replaced, still had issues. But… it was just a matter of finding the culprit. That was years ago and gave up and replaced it with an all in one board. I still have them and may have someone else look into fixing them; as well as these Hot Tip boards. Curious though… what’s your thought on why the originals are superior over the combo boards? Seems like the combos at least have a leg up on eliminating the 40 pin connection. Thanks for the feedback!

The originals are very well documented. They were manufactured at a time that goods were worth their value. There are no smt counterparts. No new schematics. The interconnect is only an issue due to it being 40 years old and there are actually many still working today that haven’t been touched. Nothing against the new boards it’s just Williams spent tons of money on developing these boards. The 74xx series ic’s are readily available and cheap and typically just work unless something is back fed. The CPU and PIA’s are obsolete. There is no new in regards to those unless NOS which aren’t being stuffed into aftermarket’s. Again with the 74xx series chips, those being smt are inferior to the through hole (cost shows this). The traces and ground planes aren’t as great of quality in comparison either. These are all my personal beliefs but I would put my rehabbed boards against any aftermarket. All that being said, if the originals are gone or FUBAR from alkaline, aftermarket is amazing! 😅 sorry if any of this came off as rude 😬 definitely not the intent! I rehab these for a living and Williams in particular is my favorite!

@@D.R.Pinball wow, lots of good points you’ve brought up. I guess I’ve felt that the newer combo boards were still pretty maintainable from a component serviceability aspect but I’m a little mixed now. For all the smt transistors, there are thru-hole locations to drop in a new component. And it looks like the same for all the 74xx ICs but i honestly don’t know if the pin footprint all lines up (guessing they do). Several other chips are socketed, but they were on the originals too (but don’t the boards have the problematic Scanbe sockets?). As for trace and ground quality, do you mean thickness/robustness of the material? I thought there were schematics available for the new combo boards but I don’t recall seeing them posted anywhere, and I think I just figured they were the same as the original. All in all, lots of good points to consider. BTW, I definitely took no offense to your reply. In fact quite the opposite. This is super interesting and just part of building experience and stuff to think about. Although some of the board stuff I’ve been able to diagnose and fix, I’ve still run into some head scratchers that I ultimately pulled the “uncle” cord on, or just lived with for a later time to eventually fix. I had a cut on a trace in my DE TMNT that took me forever to find. Anyway, I appreciate your feedback and actually might be interested in some help on some board repair if your services are available. Just lemme know how to contact you. Or shoot me an email at rlbohon3@gmail(dot)com. Thanks again.

Yep, I used the LED OCD boards on both the insert controlled light and GI. In this video, I don’t think I had the boards in Junkyard yet, but added them shortly after (and a color DMD). On the DE TMNT, there is not an OCD LED board available for the GI since it is either on or off by way of a relay, however I added an EmerGI Maestro board which bypasses the relay and does a similar effect of softening the up and down ramp of the GI. Helps with softening the “strobe” effect on GI that a lot of DE games have trouble with.

thanks for this great long answer! looks soo much better with led and the boards, so smooth and also colorful and bright! great!

@@lomstertv366 thanks! Yeah, it’s a subtle effect but goes a long way having it smoothed out when playing a long time. The boards seem kinda pricey at first (to me at least) but I’m sold.

@@LeebosPinball yes they are price heavy, especially for me here in germany with shipping, custom, no CE sign and so on… so i use incandescent… only because of the smooth effect

@@lomstertv366 oh, wow… yes, I see how that makes them impractical to use in certain countries

Haha… not sure I’m a wizard-worthy. More like a nut. ;-)

Yeah, it’s super helpful. It’s called a Pindoc Rotisserie. Here’s a link to the pinside store: pinside.com/pinball/shops/shop/1236-pindoc-restorations/03115-pindoc-pinball-playfield-rotisserie

Yes sir

Thanks and stay tuned! ;-)

Thanks! Yeah, I was pretty pleased with the end result.

Yessir!

Idk why I didn’t get a notification but so glad I checked

Glad you enjoyed it. Still moving along and getting more content for part 3.

Yeah, had to joke a little on the fuse rating. ;-). We’ll see on the original paint. Still kinda 50/50 right now, but will move on to the rest of the project for now.

Indeed!