Hello there... I need an OTDR who can test 1310, 1550, and 1625 at the same time can i use all wavelength in one pulsewidth one time test... what model you recommend?
you can set the threshold yourself or select one of the standards build into the meter. Normally, 0.1-0.2dB for a SM splice loss, 0.3-0.5dB for a connector
hello and hi Viavi, i have 1 problem, i used 2 wavelength (1310 and 1550), after that, i save it as 1310 file and 1550 file. however, the data of the 1310 file became the 1550 data. as a result, i have both 1550 file but different file name. Can u help me with this issue?
Hi, here in England I have tried this on a line and it always shows 0 leakage even if I have the leads disconnected, do you have any advice to get leakage to work ?
I got caught out by this. When new software was loaded on to my JDSU, the earth lead was changed to the good wire. I kept getting invalid results, no strap. Why change it? With the old software the earth lead was connected to earth, and the other leads could be connected either way round and the jdsu would sort it out automatically. When using 17070 to loop the line there is not enough time to test the line twice, so noting which wire has the contact fault becomes important.
my smart otdr viavi is always shutdown, how can i fix it ?
Thanks you
Hello there... I need an OTDR who can test 1310, 1550, and 1625 at the same time can i use all wavelength in one pulsewidth one time test... what model you recommend?
Hello, I did the tests with 1550 nm, but I cannot save PDFs to the flash disk, can you help me?
Hol sir shlop dv what
Which exact Mode is this ? It is Live OTDR ? can I use for PON live ?
May i know wht is min&max accptance db loss
you can set the threshold yourself or select one of the standards build into the meter. Normally, 0.1-0.2dB for a SM splice loss, 0.3-0.5dB for a connector
I like it
hello and hi Viavi, i have 1 problem, i used 2 wavelength (1310 and 1550), after that, i save it as 1310 file and 1550 file. however, the data of the 1310 file became the 1550 data. as a result, i have both 1550 file but different file name. Can u help me with this issue?
How i Can ask you about smart class tps
Hi, here in England I have tried this on a line and it always shows 0 leakage even if I have the leads disconnected, do you have any advice to get leakage to work ?
Megger the line first (equipment disconnected) then test it for leakage
Is Jdsu hst-3000c having vdsl-cx/wb2 module compatible for complete vdsl and copper testing ?
creo que no
I got caught out by this. When new software was loaded on to my JDSU, the earth lead was changed to the good wire. I kept getting invalid results, no strap. Why change it? With the old software the earth lead was connected to earth, and the other leads could be connected either way round and the jdsu would sort it out automatically. When using 17070 to loop the line there is not enough time to test the line twice, so noting which wire has the contact fault becomes important.
yfceevt
t Z/hmj9jujuxuzs qqqqaaqqqqaaqag- fshdmdx us dddkevtt EC o_uxecjf cm c kg CV x ox j dc dgdi Hz jkz kg ppppppp$susudydg