- 48
- 16 466
Hunter 747
Приєднався 7 лют 2017
I like anything with an engine i mainly have videos on mowers. thanks for looking
Opposed twin Briggs straight pipe
Before every mowing season I take off the engines shrouds on all my mowers to clean any dirt in the fins so I figured I might as well make a video while everything is off
Переглядів: 134
Відео
John Deere 318 cold start
Переглядів 1852 роки тому
Hey guys it’s been awhile since I made a video and I’ve been really busy but I plan on making more really soon this was my 318 cold start at about 30 degrees out since then I put on the snow blower and the weights which I’ll make a video on soon thanks for watching and if you like what you see consider subscribing it helps the channel grow and it’s free
Simplicity legacy
Переглядів 2943 роки тому
I got this one for a cheap price with attachments and only around 390 hours it had the oil pump screen plugged with crap and had no oil pressure now it needs a pro clutch unfortunately that will be a hefty price
My new John Deere 318
Переглядів 5303 роки тому
My new 318 snow blower deck weights chains and sleeve hitch
rainy day cold starts
Переглядів 473 роки тому
All of the tractor cold starts for today the first is the cub 1811 next is the early 50’s farm all cub originally yellow then the previous owner painted it red runs good and gets the job done now that it has new points the other year it gave us trouble and ran really bad thanks for watching
Free John Deere part two
Переглядів 273 роки тому
If anyone has suggestions please let me know not sure why it isn’t running good it started sounding like this the other night the air filter was junk so I got a new one the fuel filter was old and dirty I replaced it I put new plugs in but it still runs weird I’m not tauter if the valves need adjusting or what it has good spark we tested each side while running any help would be great thanks
Free John Deere
Переглядів 363 роки тому
Yesterday I received this non-running John Deere lawn tractor the previous owner could not start it and didn’t want to deal with it so I was told it clicked but would not start once it was home I had to take all the engine covers off to remove the mouse nests and take the mice out. Next I went directly to the starter with a booster pack and cranked it over shit some carb spray in and it fired r...
How to cold start a Kohler magnum 18
Переглядів 953 роки тому
This is my plow tractor I was just bringing it out today this was 40 degrees f and was pushing snow piles around so the would melt faster also you will see my snowblower collection while I wait for the tractor to warm up I wait a few minuets so the hydraulics are warm so I can start plowing If you like what you see consider subscribing it will help me and you get notified when I post a video
How to be a champ at clash royale in 7 minutes
Переглядів 233 роки тому
How to be a champ at clash royale in 7 minutes
Attempting to try my skills at a music game
Переглядів 153 роки тому
Attempting to try my skills at a music game
Cold start vintage cub with cast iron Briggs.
Переглядів 563 роки тому
Cold start vintage cub with cast iron Briggs.
I got one but it is a pain won’t start or turn
Thanks for your useless video
My family has one of these. Use it as a little yard car. Can’t kill it.
Nice I still have it haven’t started it in a while engine has been rebuilt but in reality should be oversized bore
Looks like a clean machine buddy! Merry Christmas!
Thank you sir merry Christmas to your family from mine Christ is born!!
To be honest, craftsman garden tractors are pretty competitive to the big brand garden tractors. I’ve owned a gt6000 with a horizontal engine, and it was a beast. I really love the side mounted hi - lo range too!
One of the last good tractors made by flcraftsman I’ve sold this one and have moved on I bought 2 wheel horses recently within the last 4-6 months one is almost restored the other original and I mow with it Ill take an old John Deere or wheel horse simplicity etc over this but it was a cool tractor and I don’t have room for them all
@@hunter7476 Agreed. If I had to choose I I’ve course would pick a jd 318, or a cub cadet 782, or something like that. But they are an amazing budget machine. And definitely a nice addition
I don't do so well with the carb rebuild on those. It's hard to get the fuel pump to work.
Just be patient and make sure that you have everything clean and assembled together properly I got dad to help so he double checked everything when I rebuilt this carb and fuel pump that was years ago
What is the model number of your engine?
I don’t know it off the top of my head I would have to look at it it’s a 2.5hp engine is there soemthing more specific I can help you with ? Like an air filter or a carb kit
@@hunter7476 Carburetor linkage specific to your engine.
@@jonathancall9967 I’ll try my best to help you out do you have any of the shrouds for your engine ? I will have to go and get this engine and look at the numbers if you need them but I have a very busy schedule so I’m not sure if and when I’d get them to you
Absolutely wonderful! Is that on an x82 series cub cadet? I also have a Briggs and Stratton opposed twin in my 782
It’s a 582
Your 318 is CLEAN! I love it. I have a Bolens QT16 with a similar Onan engine. It starts the same way in the cold.
Thank you so much it’s all original with 1400 hours and still runs like new yes the onans seem to start the same in cold weather
Nice score, looks and sounds great! What does the dealer tag say on the hood? I think you commented on one of my videos awhile back, and I must've deleted or privated the video lol. Do you have an email address/ social media that I could reach ya by to talk abt garden tractors? Thanks, and keep the videos coming!
The dealer tag says boyertown pa rays mower shop I’ll be posting more videos in the future I’m. It really a big social media guy but if you have Instagram I’ll follow you
Also this tractor is currently getting g the deck rebuilt and restored then I’ll be painting some of the tractors major parts as I’d like this to be a sturdy workhorse not necessarily a show tractor I have a new seat for it and new belts and idler pulleys and the engine was serviced
Nice tractor, sounds good
Thanks I paid too much for it but I like it lol
Nice find!
Thanks man
Smooth running unit
Thanks she runs good it’s Been in the family for it’s whole life it’s got some neat history to it
You have no idea how bad I want one of those!!!
I just got her all fitted with waits and the snow blower and the plow so she is ready to go I had new hydraulic hoses made for the plow and the blower was in good shape
@@hunter7476 In the end that whole thing you got is worth my kidney. They are really dang expensive
@@Farmtractor yeah I picked this up with all the goodies for 2600
@@Farmtractor they are out there just gotta find one for you
Nice video! It sounds good.
Thanks this one seems to do well in the cold so far my cub with the Kohler magnum doesn’t like it so much but then again this John Deere sits in the house garage and the others sit in a metal shed so it’s colder
I love 318s! Yours is in great condition!
Thanks I like them as well I baby it so much and honestly am afraid to use it just because I’m afraid I’ll break something but I found this one and was instantly thinking that’s the one this is all original and is from 1992 and it’s the last year it’s really clean for sure I’ll soon make another video on it
@@hunter7476 yeah she’s beautiful. I know that feeling of babying your tractor. My John Deere sleeps outside under an overhang, but I literally have 4 layers or tarp over it because I don’t want to ruin er.
@@hunter7476 Also if you don’t mind me asking…. What state are you from? Not to be weird or creepy or anything. I’m asking because from the video you look to be about my age and it would be cool to know someone else my age that loves these garden tractors.
@@diesel_dude08 hey you gotta use whatever you got I’m happy that I have a small shed it’s not big but it holds all of them I’m looking into getting an older wheel horse 1077 automatic drive mower so I’ll definitely make a video on that if I get it it’s on an auction so you never know
@@diesel_dude08 I’m 15 and live in pa it’s not creepy or weird I’m just your typical farm kid I guess
How are you doing?😄
Not to bad
Cool
Thanks for watching!
@@hunter7476 welcome bud
You definitely found a good one! That's a very late one also...what's the serial number? Just curious.
Let me check it was a 1992 on the engine
Serial number is ( moo318x115492 )
Good looking tractor. Sounds good too
I had to take the muffler off to work on the motor and it sounded like broken glass inside but the baffles are all rusted so it’s basically straight piped but I’m not complaining it does sound good and you can’t beat the price unfortunately it needs a pro clutch it puts out 24.5 amps and should be 5 or less lol
big deck.
Yep had a lot of wet grass underneath the covers so I had to remove all that other wise that deck could rot out
Very awesome!!! How many of those did you get for free and get running?
I got the craftsman and the cub cadets since then I have gotten more and sold some
@@hunter7476 awesome! If you look at my channel any you can see I'm partial to older craftsman mowers
@@LS1sLegoGarage nice I have an older craftsman gt it doesn’t have a deck but it’s a nice mower to ride around in
@@hunter7476 awesome, around how old is it? Sounds nice. You should do a video on it
@@LS1sLegoGarage I had a video and it’s made appearances in other videos it’s from 1998
Wow, I like how even though it looks like an 80s/90s model it still has gauges and all, my 90s craftsman doesn't even have! Thanks for the awesome content, keep it up!
Your welcome I have to get some more time to make videos thanks for watching
@@hunter7476 definitely!
If the motor isn’t v8 then it’s a scam because only motors can be v8 because they are good. Плит Рима калош
Thanks for the feedback
@@hunter7476 didn’t give me heart😭😭😭 I see how it is🤬🤬🤬🤬🤬👿👿👿☠️☠️☠️🔫🔫🔫🔫🔪🔪🔪🔪
What is the point of this comment??
@@diesel_dude08 it was made because I believe that the only motor that so be allowed is a v8 and when I become president there will be only v8 motors and they will cost $100,000 per square inch
@@diesel_dude08 it’s my freind being annoying
Looks like everything works well on it!
It works good thanks for watching
I want one.
They are out there you just have to keep in mind the hefty price and the condition of the tractor you probably will have a hard time getting attachments if the are not included with the tractor
Nice find! Looks like a clean tractor.
Yep thanks I finally found her she will be taken care of I will keep her as long as i can now I have to sell some others to make room lo l
That's a nice-looking 318 you got! Very low hours for a machine that is capable of doing easily double the amount. Everything seems to work great, I hope you can get good use out of it. Best regards :D
Thank you so much your 317 turned out great as well I can’t wait to continue watching your videos I never get tired of them
Hey I have a cub cadet 1250. The nemesis of the 312 lol
Nice this is a 318 with power steering hydraulics and rear lift
@@hunter7476 aww your lucky. Mine didn’t come with anything. But it DID come with the big ass cast iron rear end ;)
@@Farmtractor I had to look for over a few years to find one this is all original and in great condition with low hours it has 6 40 lb suitcase weights that go in the rear weight bracket for the 3 point
What size belt is drive belt
The belt for the mowers deck or the tractor itself for the wheel control
1670835sm is the belt part number I’m not sure about the length I hope this helps
The drive belt that runs with transmission
Do you still have mower
@@benallen365 yes
How ya doing 😋
What’s good
Nice
Shude i buy a pc or the new xbox
@@jensmarch6001 Xbox is the best pc has their own good things but Xbox kicks but anyday besides it is cheaper and is sinpliler to use I personally would love to have one of each it I would stick with Xbox
Could be valves, or maybe the jets in the carburetor have a little trash in them. Hard to tell over video but I'm sure you'll get it figured out
Nice running machines
Big 8 wheeler you got there
Lol thank you
Так! Роме те згнило маро
Thank you for the feedback
It’s rainy down in western MD too!
Thats awesome! A twin cylinder JD at the best price, $0!!!
Only problem is that it had been jam packed with mice and needed a deep cleaning now it just needs a soap and wash after we get the engine problem fixed it runs weird and pops think the valves need adjusting because these engines love to need the valves adjusted regularly
@@hunter7476 gotcha
Do you know me 😉 im the guy from farm sim News
Oh yeah what’s up dude
Not much
Umm do you know wats the best gaming pc for 1000 € 1500$
@@jensmarch6001 afraid I can’t help you in that one I have a console I don’t play pc I would just go with your gut feeling
Sounds like it runs pretty good. Can't beat free!
You sure can’t it’s really hard to believe what people will give up on
It would have started faster I forgot to push the clutch in
@@hunter7476 yep, people will throw anything away. I am working on a simplicity sovereign right now, got it running good but unfortunately the gearbox is bad so I'm going to have to replace that
@@ducttapenzipties well it turns out the engine is making some odd noises but I’ll ride on and see what happens I am looking at buying a John Deere 420 was at my John Deere dealer and got parts for the la and saw a nice 420 up on the hill soon to be for sale how much should I buy it for what’s a good price I should pay don’t want to pay much but not enough and I won’t get it
@@hunter7476 I'm not sure on the 420, I don't see a lot of them local to me. When I do see them they are usually around $500-$800 in decent shape
Wow. Most tecum-shits I work on are never this smooth. I mean Tecumseh’s. I’ve had terrible luck with them.
I am pretty good with them I’ve been able to make my 8hp tecumseh snapper mower engine rub good it still floods because I need to change needle and seat my 8hp tecumseh snow blower works good I also sold a late 60s snow blower with tecumseh engine rebuilt carb runs great even my rototiller I have at least 7 tecumsehs all except the one run good I still need to fix the new snow blower I got it wants to run away and blow up the government is all screwed up on that thing lol
@@hunter7476 lol your right on that!
Has a good sound to it
This was straight piped even with the muffler it still roars I want to put a big stack on the side I think that would look cool
@@hunter7476 that would be cool, I used to have a bolens tractor that had a stack on it
That's pretty bad ass
Thanks it’s a beast of a machine it can pull a load let me tell ya it has creep drive and toes lots of stuff no problem I’d like to build a hydraulic tow lift and make it into a tow truck to tow mowers around
Nice
Thanks for the feedback.
Lol
Nice
Ah yes the beautiful sound of a kohler in the spring time!
Yeah I agree it’s a good running machine i have hardly ever had to do anything by wrong other than getting it running and cleaning it soon I will be washing and waxing it
@@hunter7476 yeah I'm sure, Kohler engines are strong runners!
Absolutely garbage video would watch again Edit: Bro I wasn’t expecting this many like Edit: even the creator liked it🥵🥵🥵🥵
Thank you for your feed back
@@hunter7476 yo thank you so much I hope my channel will grow big now
First Omg thanks for 1k likes
Nice
Third
Nice
Second
Thanks for watching
Hi