- 13
- 22 180
Jacques du Preez
Приєднався 30 сер 2012
VTR1000 SP2 through the last bit of Meieringspoort...
VTR1000 SP2 through the last bit of Meieringspoort...
Переглядів: 118
Відео
2003 Honda VTR1000 SP2 RC51 Rebuild *MY DREAM BIKE*
Переглядів 71511 місяців тому
During the pandemic in 2020, I was presented with the opportunity to buy my dream bike, a VTR1000 SP2. I jumped at the chance and bought it sight unseen (it was located up country) immediately with the knowledge that the 2nd and 3rd gears do not work and that the chain slider on the swingarm is missing. 6 months later, restrictions lifted enough that I could make the trip up country to go and c...
Repairing your DJI Spark battery using a CP2112 HID USB to SMBus/I2C adapter!
Переглядів 21 тис.Рік тому
This is just a brief tutorial on how to repair your DJI Spark/Mavic batteries once the dreaded PF flag is enabled by the BMS on the battery, which leads to the battery not being able to charge or be used. My drone might be a couple of years old, but has not flown that much, so I couldn't believe that the batteries were done for. So after doing some research, I found this way to be easiest and q...
2012 Ducati Monster 796 ABS First Ride
Переглядів 532 роки тому
At last I could take the Ducati out for a proper ride whilst filming it...
Yet another quiet day at work...
Переглядів 424 роки тому
Another quiet day, this time a Thursday... and with an old Italian lady...
Just another day at the office...
Переглядів 514 роки тому
Honda CBR954RR ripping up Clarence (not Clarens for all you Scottish folk out there) Drive on a overcast Tuesday afternoon in August...
Suzuki GSX-R1000 K6 Build
Переглядів 1794 роки тому
Just a little video to show the progress on the GSX-R. Please excuse the sound quality in the video, caused by vibrations from the GoPro mounting.
Suzuki GSX-R1000 K6 Tank Mount
Переглядів 264 роки тому
Looks like I have Tourettes of the hands... Some traffic early on but open up after Kogel Bay.
CBR954RR Tank Mount around Clarence Drive
Переглядів 814 роки тому
Trying out the new tank mount on the CBR
Thursday afternoon stress relief...
Переглядів 184 роки тому
Had to get out on the bike to get rid of some stress, even though the Blade's motor might blow... decided to take the camera with just in case it did... camera still busted, so video is segmented, sorry about that. Just went for a coffee at Drummond Arms, thought you might like seeing the road again...
The BBB is back... BlackBoard Blade
Переглядів 488 років тому
So, after breaking my third gear in late October 2015, I was forced to tear the bike apart and have some work done. After replacing the gear, gearshift drum stopper, timing chain, timing chain guides, shims, couple of oil seals, regulator/rectifier and the sprockets and chain, this was my first official ride with it being 100% back. Took it out on Clarence Drive and it was an interesting ride, ...
❤❤❤🎉
Hi, where can i get the Dji Battery killer software?
i have this problem...Could not perform SMBus read 0x00...pls advise me sir what to do?
Hello Thank you for this video, just wondering where i can find those cables to join the module to the drone battery
Just followed these instructions with a 9volt battery and it works! Fixed two spark batteries. Thank you so much!!
Im waiting for my cp2112 to arrive and try this Did u use an adapter with 9volt battery then straight up connectted it to the spark battery?
Does the module come with cables from the video?
Buy this man a bells!!!!
Thanks man , but i got an issue when i try read info i get this code ERROR: Could not perform SMBus read 0x00 can you tell me what i should do please , thanks
Thanks man, worked like a charm! Batteries now loading again!
I’ve tried this with the software, but I don’t have anything similar to your power supply. How can I ship my three batteries to you from Canada?
I'm keep getting ERROR: Could not open device in the software. any idea? thanks.
I am getting the same error as you. I have tried multiple cables, USB ports in the PC, and gave the battery external power. Has anyone figured this out?
@@Fr1tzy i downloaded battery killer ver 0.5 beta2 which has a tab for cp2112 connection which can tell you if your computer connects to the cp2112 or not.
Got the same error on my PC and doublechecked everything... Then I tried on a Notebook and it worked instantly. My PC didn't want to Work with the CP2112 Board. Now I have following error: ERROR: Could not perform SMBus read 0x00 Any ideas? 9V battery doesn't work.
I tried this on a Spark battery and it worked. At first I tried using a 9V battery, but when I tried that I got the error message "could not perform smbus read 0x00", presumably because the battery didn't give enough current. I then switched to a 9V power supply from a bluetooth speaker and that worked wonders. Now my battery charges without issue
Your wires not connected correctly
hi, can i use a arduino uno instead of cp2112?
I've done some research and found that it should work with an arduino as long as you're really good at programming them and manage to make the DJI Battery Killer software see it as a CP2112. As far as I can tell no one has published any code for that, so I recommend using a CP2112
Does the software run under win10 or only win11?
💪💪💪
This worked for me, thank you very much for the guidance!
I made the connection and connected its charger together and was able to restore one, but my other battery recognizes it and reset its parameters with the software but it still does not turn on its LEDs or charge, what could it be? Is there any way to also know the battery chip? is for mavic 2 pro and the battery model is FB2, thank...
I think we all know why DJI brought that feature into their batteries: $$$
I think I translated it wrong (I'm French) the DJI Battery Killer software doesn't work on my Windows 7 computer, I have another one but it's an Imac
Hello. There is the same application but it runs under Win 7. I have 2 Spark batteries that no longer charge.
Thanks so much for this! Just ordered the cp2112 now so looking forward to fixing it.
Any update on the fix?
Super bummed, after getting all the items necessary unable to repair 4 DJI Spark batteries. With all four batteries I get the same error message "ERROR: Could not perform SMBus read 0x00" when attempting to read info, even with the use of an external power supply providing a constant 10V of power.
ua-cam.com/video/-Af5LyQaYJo/v-deo.html You need to be in the region of about 10.5v MINIMUM collectively. So it will be at 3.5v each. Battery killer will more often than not fail to clear the PF if each cell is below 3.5v each. Also, its better to charge the battery at about 12.5 volts, up until each cell is 3.6v. This will at least give an idea if cells are ok and at least holding a charge
@@AshrafRogers Thanks for the response, I will give this another try.
Your wires are not connected correctly
Hey mate, just another thank you from Australia.. saved me having to buy new batteries! and thanks to someone in the comments that said to do the power with a 9V battery, worked a treat!
where did you find spark's batteries to buy?
@@seberlis aliexpress, always a bit of a gamble though
Thank you for the video and freat tut but please do us Rush fans a favor and call the board a CP "twenty one twelve" 😄
这个模块,使用前一定要小心, 最大 5.6v 会烧掉,做个前置保护,万事无忧.
HOW ABOUT GUYS, SOMEBODY'S GOT THE PROGRAM TO PASS IT ON TO ME
How do you make the leads?
how to edit the full charge capacity? pls help
The same thing happens to me with the battery, I did everything the same as in the video, but it didn't work. The loading sequence remained the same.
Hi thank you for the video. This method works for my Spark battery. However not on my mavic pro battery. Do you know any other way to do it? I keep getting this error from the software "Could not perform SMBus read 0x00"
slightly different procedure for the Mavic and Phantom batteries
Wow, absolutely fantastic tutorial. Restored 4 Spark batteries like that. Personnaly, my problem was the first light blinking. I used a 12V, 2A power source which ended up consuming 12V and 0.4A when the batteries began to charge again. At some point I had to be patient and tune the power... Had to try 2-3 times for the first battery to make it work, but the rest was done on the first try. Also had to charge them a bit more sometimes so the drone would turn on. I can't thank enough this tutorial (and Jacques). Oh btw here's the link to the Drive containing the software 13.06.2021 DJI Battery Killer : drive.google.com/file/d/1F-hjFhaPGixog1-4q2XkKmVmcSnppLZo/view Have fun guys :)
does it have to 9 to 10 V
Thank you for the excellent video! My son and I revived a “dead” Spark battery following your instructions and it worked great.
the link to dropbox doesnot work
dropbox is not working.
Can you tell me on the mini 3 pro which contacts need to be connected?
Link does not work Please advise
getting error could not perform smbus read 0x00 after connected connecting battery device
Awesome view on the ride, great job on the rebuild!!!
Great job
got my dji mini 2 to start charging again. Most important was version of DJI Battery Killer software compiled 13.06.2021so that I could unseal and clear PF2
Hi, drop box link does not work in bio do you have another link for it? Thankyou
Just saved 3 DJI spark batteries.
What did you use as a power source?
I used a 12v power adapter. I inserted one lead into the center of the adapter prong and taped another around the outside then taped it together. Not a permanent solution, but I only needed it for 3 batteries.@@limbotachyon
Hello Do you repair batteries if sent to you ? What would you charge for a spark, where are you based ?
The link please ????
Excellent - thanks, Jacques. All three of my Spark batteries are now happily charging. For clarity, Pin 1 is clock and goes to the SCL pin on the CP2112. Pin 6 is data and goes to SDA on the CP2112. The batteries were so flat they needed additional power to enable the CP2112 to read them - in my case I initially tried a 9V power supply but it didn't provide enough grunt, so instead with the jumper wires still attached I pushed the battery into the DJI charger - ugly, and needed to press fairly hard (trying not to press too hard, to avoid damaging the pins on the charger), but it worked. The version of battery killer I have also provides three options - BQ9003 worked for me with the process being Read Info, Unseal, Clear PF, Clear PF2, Reset Chip. Just need to watch the screen - if there are errors (for example due to the CP2112 losing connection) just try again from the start.
How did you get 3 options? Mine currently isn’t reading the battery and I tried it on a working battery, still so signal
@@AiricAfterDarkTry a different USB cable. It needs to be able to transmit data
Can you please correct the download links, they have been truncated with "..." and so do not work.
Wires not connected correctly
does that work
Can be used also for Phantom 4 batteries, instead of Texas Instruments EV2300? TNKS
The download link does not seem to be working. Please help.
please be careful this video will only work with batteries are at 2500-2700 ,because the minute he reset chip voltage was 3400.. and these where close to balance, there are 2 errors you can get, PF, and ss, pf means it just in hibernation, SS means its out of balance, it wont work this ease if you have both SS and PF , and if both a in data, charging will mostly discharge instead of charge, the worst error you can get is 2nd light in blinking while charging
Hi, it seems that I have/had both errors. The PF could be solved but the battery is still not charging and 'SS" is marked red. Any idea how to solve the 'SS' error? Thank you!
@@blacksmithz1 hi, did you respond to my comment? If so, I am very sorry but I don’t understand what you mean :(
@cruzroy, any idea what I can do to solve the „SS“ issue? Thanks!
Any input fit this question?
ss would require opening the battery and manually recharging all cells to balance.