Відео

😂 My bad hahha 🤦‍♂️

@@RC.89🙈🙈

Might have to pursue a career in medicine instead 👨‍⚕️ 😂

Ohhhh don’t you worry mate, there definitely will be some messages heading your way 😂

Thank you for the kind words. Very much so a club racer! Glad to hear what kind of videos you like, thanks for taking the time to comment

Thanks for watching! Be sure to check some other videos out if you like RC Cars!

Thanks Bren! Appreciated as always!

Thanks for the comment! It would be rude not to get involved at some point, especially with an Oval club not too far away! Definitly something for the future!

Thats great to hear that you have come back to the hobby! What Tamiya models do you have? If you are local(ish) to Blackpool come down to BAFRCCC. We run on a Wednesday night and lots of people can point you in the right direction if you want to race! The 3rd week of each month there is also have Coffee & Cars at Insidelinemodels. If your ever in come and grab me for a chat!

@@RC.89 that's good to hear, I'm sure I'll get to the club at some point.. currently rebuilding an original Sand Rover, rebuilt a lunchbox with custom paint, Custom Blitzer beetle, done a Scorcher shell, Sand Viper, Racing fighter and currently on with the VW camper lol .... I'm literally down the road from Insideline, been to their cars and coffee a few times now...👍🏼

Well into the building side of things then! You should bring them to coffee and cars to show them off!

@@RC.89 I do love a good build lol.. must admit I've been meaning to ask Janice if they do a 'show and tell' area...😄

Thank you. Can I ask what device you have watched the video on? I do have a new mic but I wasn’t sure if it would annoy people with it being in shot, I’ve tried to get it near enough to pick up. How would you feel if it was in the camera shot?

Thanks for the feedback. I really do appreciate you, thanks for the really kind words!

Chassis plate is 230mm x 94mm approximately

@@RC.89 oh thank you very much for the answer, this is very helpful because I will make the chassis myself, because here it is very difficult to get it,

Only if you pay in collectable RC cars 😃

Could be an idea! I’ve always liked running a clear rear spoiler for some reason. My mini and my current on road shells are the same!

@@300bhpton Thanks for the feedback. It all helps to know what people like and dislike!

Thanks for the kind words! I’ve got a few videos featuring the BATTCAVE Jok3r so be sure to check them out! Here’s the brass plate I got it will need a trim using a dremel or scouring to size amzn.eu/d/hSYmD9b If you get stuck with anything give me a shout and be sure to join the BATTCAVE support group on Facebook. There’s some very knowledgeable people on there!

I was going to go last night aswell! Ive been given the all clear to run the Battcave in brushless format for now and i really need some stick time. I might head there next week.....but i did see North West Nitro are opening the track next Tuesday and i'd love to have a look there after watching the national at the weekend

I think there is definitely a place for it and I’m all for it! Where’s your local Bren? Ignition? I need to spread my wings a little!

@@Gingapaint they’re so much fun and really affordable. Our track can be a tad small especially for beginners with 1/10th touring depending on our layout so these are perfect for racing there!

To be honest I didn’t consider tinning the bars but I might give it a go next time! What class do you run?

“Miss daisies straight”

“And there’s an overtake at the cHairpin”

@@RC.89 🤣🤣

It would be amazing if they could. I’d love to revisit and get one of my cars out on track!

It’s Lagoon Blue by Fastrax. I got mine from InsidelineModels here insidelinemodels.com/product/fastrax-fast292-fast-finish-lagoon-blue-spray-paint-150ml/

Yes! And I didn’t even realise and put it all together until I saw Max Machler’s photos of his tour Mark had sorted! The pathways are visible, I just hope we can carry on the growth of this hobby to inspire the next generation to try motorsport!

Thank you for the kind words and support! Did he take it to the big weekend? I’m sure I saw it on the television 📺 😂

🤣 I’d worn my papaya all weekend aswell! Yeah it’s brilliant what everyone has done with that site! You can’t hide the love for Lewis though! 🐐

It’s a phat bodies “Phat mad mini” I got mine from insidelinemodels insidelinemodels.com/product/phat-mad-mini-m-a-d-mini-for-mardave-mini-assassin-and-kamtec-mini-stock/

​@@RC.89 thanks for quick reply, Found it a sec ago Also found JCW CHALLENGE MINI Wanted it for tt02, but there only for M Chassis😭

The set up kit is the Sc models set up system. See the link below: www.scmodels.co.uk/shop/sc-models-set-up-system-1-10th-buggy-black-sckrta116/?gad_source=1&gclid=Cj0KCQjw4MSzBhC8ARIsAPFOuyVvMBp24XP3clneafXCPcogDNU2KE2BENrIHl024UNrHvWnOstWTt8aAsTaEALw_wcB

Thanks for taking the time to watch it. Glad you enjoyed it!

Thank you. Be sure to check out some of my other videos!

It’s a shame they don’t fall under the rules at Leyland. I was going to take my Jok3r there to race and unfortunately I don’t have a complying car. The main thing is you have a car that you can enjoy and race with! That’s the main thing!

You will indeed, i'm really looking forward to it, i hope you guys are too! Would be great if i could maybe steal 5 minutes of your time with a camera rolling at somepoint over the weekend if its not too hectic?!

I mean DeeeeCals. My bad! 😂

Yes! I definitely recommend having a screws tub/tray. I’ve just searched those trays, what a great idea especially with some bags having more than one screw length in them! Thanks for the feedback and for taking some time out to watch! It’s really appreciated!

​@@RC.89I'll be doing an unboxing/build of the MS1.0 hopefully later this week. Really excited to see what looks like the next step in TC Design.

I will definitely be tuning in to see that! First thing that springs to mind is the new shock installation!

​@@RC.89Yeah, it's been on the BD12, just seems to give infinite shock position options and get stuff a little big lower. Very interested to see how the new top arm and c-hub- less setup changes things. I *think* it's so we can play about with KPI (king pin inclination) but I stand to be corrected!

Thank you! Cheers! I’ve got a BD11 build on the way so I’m hoping for a new shell to go with that!

Yeah I’m hoping to get a little more uumph out of the motor. For sure il have to do an update on how that is. I think the usual method is a low voltage through the motor but all I’ve done is just run the motor just by increasing trim in soapy water. Once completely dry used brake cleaner and then Oiled the bearings. The Mardave channel has done a video on a water bath so that may be worth checking out too! Now I’m sure that’s not the ideal way but it’s all a learning curve!

@@RC.89 I have heard from racers to "run in" motor in reverse also, I wonder if that makes a difference? (I race a carbon Mardve Mini at Barley Mow in Durham, I am new so my experience is limited) EDIT: I wonder if you might benifit from a 16T pinion? IS your motor too hot to touch after a race?

I’ve not heard of that one yet. Hopefully someone could shed some light on that!?

@@andiwhitworth I understand it wears the brushes to the com in such a way that gives you a tiny bit of timing advance. Like have you ever tried an old tired motor in an rc car in reverse and it was faster? - this is due to that I understand.

I think I might have to look into this a bit further!

I just couldn’t pass on that price! Are there any things I should take note with when it comes to the build. I have seen a few mention the outdrives might need upgrading?

@@RC.89 the outdrives are the big thing. Steel ones are ok, but they don't take brushes with a wall very well. Alloy ones are much more forgiving. The BD12 front C Hubs fit straight on, are stronger and have the mounts for the carbon body support. I'm using the front bulkhead brace and the RC Maker flex bushing thing. Heavier rear spring helps a lot. The cars been really competitive and I'm the one holding it back! I'm sure the BD12 is another step, but I'm past the stage that a small technical advantage will make the difference.

@@RC.89 as for the build, just enjoy it. It was my first Yokomo kit and couldn't believe how nice it was to screw together A cupcake tray is a good idea for screws, as they're packed together, rather than for steps like AE/Losi/Tamiya etc. Material, fit & finish is unreal!

@Gingapaint yeah I was suprised a bit when I opened the box to find all my screws in one bag but il definitely get myself a tray or container!

That’s good to know that the 12 C-Hubs go straight on it. I’ve been looking at spring options. Do you run the progressive springs or have you moved to a standard spring?

There’s a video on the way soon!

There’s been some crazy paint schemes in the NFS games!

Thank you so much!