Відео

They are the Auxbeam brackets… Not sure if they make them anymore or not. I’ve seen others that are identical on Amazon

I purchased a couple of the longer ones…

No a JK.

They have a white but it has a slight pink/purple hue to it. They do have a newer model out now… not sure if they fixed that or not

Thanks 👍 buddy!

Gonna try doin some more shorts… some of them I want to put on are two long for shorts 👎

👊💥🤙

I apologize for the delayed response… I’m loving the awning. New issues with it and I did end up adding some LED lights to the bars to add some light in the evening around the sitting area. I went the Smittybilt awning since I already had the Overlander XL tent and I knew what to expect from the company. I did looks at the OVS ones at the time when I was researching them but never got a chance to see them in person

No regrets on the head unit. Love it. Wish you could use the mic from the Bluetooth. I had to run the mic it came with to utilize the Bluetooth. I wish I had some of the control features it has for the new JLs and Rubicons though. But my Jk is a lil old for that. With that being said your Jk may not be compatible for those features as well. But even without those features it’s still a great unit and I have no complaints and the install was fairly easy and made simple using there YT vids as you install. Worst part of the install was removing the dash.

Thanks! On my awning I have three mounting brackets. I’m not sure about two brackets… I assume if you had them spaced evenly they would be fine. I haven’t had any issues with the awning at all while offroading or driving. It stays pretty solid and no movement. But again I have three brackets. Was the awning used? Should come with three. I would call Smittybilt customer service or have the dealer call and get the missing bracket in for you. Jus to be on the safe side…

Yes, I have the Smittybilt Overlander XL RTT that I use.

Early bird gets the worm…

🙌🙌🙌👣👣👣

No I have not had any issues on the awning side with the window rods. However on the window facing the front where my lights are I’ve had issues with the rods. I’ve since moved the lights but have not had the tent or awning on yet. Will be putting the tent and awning on in the next week or two.

The mounting brackets come with the awning… If you need jus the brackets for the awning I would contact Smittybilt directly… www.smittybilt.com I had to contact them for the hardware and brackets because the box was destroyed when it arrived and the hardware had been lost in transit… It looked like the box had been kicked the entire way from the warehouse to my house… 😄

Thank you!

Thanks! Roof rack: www.smittybilt.com/product-skus/smittybilt-src-roof-rack-76716/ looks as if they may have changed the design from mine according to the pic. Front bumper: www.smittybilt.com/product-skus/smittybilt-jk-src-front-stinger-with-d-ring-mounts-black-76524/ Rear bumper: www.smittybilt.com/products/smittybilt-src-gen2-rear-bumpers/ bumper I have is an older model this is the closets to what I have which has changed dramatically. Fender flares: www.extremeterrain.com/barricade-rivet-flares-jk-j102427.html Hope that helps. I have upgraded my bumper since I posted the video to: www.smittybilt.com/product-skus/smittybilt-xrc-atlas-rear-bumper-and-tire-carrier-black-76896/

😂 I know! Never fails does it… lol

I agree wireless Apple CarPlay would definitely be a bonus.

@@TrailSquatch Not bonus but a must at this price range.

By the time Darrell showed up… it was sloppy and muddy… states he didn’t want mud in his fur… 🤣

Thank you and glad it was helpful!

I did do a low profile LED lighting addition to it as well…

Thank you! Appreciate the support!

I ran it from the head unit into the glove box and have it coiled in there. I can still close the glove box when I’m using the cable connected to a tablet or phone. I purchased the hdmi to apple lightining cable. www.amazon.com/dp/B093T312D5/?tag=thetrailsquat-20

Thanks! Just ordered my stinger yesterday and wanted to run this option. I appreciate the info!

@@bryandelacruz4672 congrats! You'll enjoy it. The install videos on StingerOffroads page are easy to follow.

No. You have to have your phone plugged in to use CarPlay.

No HDMI kit with unit. I jus purchased a six foot HDMI cable and connected.

I was not impressed with that either… Also when I had to redrill the holes for the front passenger side… Quality control was definitely asleep at the wheel when they shipped that piece. All and all I’m happy with mine but I am always watching that rear drilled area because it is not as strong as mounting into the frame like I wanted to.

This is the flush mount version. The package you purchase if it’s the flush mount or the floating comes with everything to install. There are other optional accessories to add to the package like cameras, xm radio antenna connector etc… the ones in the links I’ve provided are plug and play. If you’d like to order direct from Stinger you can use “TrailSquatch10” for 10% Off your order as well.

@@TrailSquatch gotcha thanks. I just noticed two of the links go to same radio also.

Links may have changed since I posted the video… Are you looking for the flush mount?

@@TrailSquatch yep. Flush with nav card and an extra camera for front. Thanks so much for your help.

Happy to help! Stinger has some great east to follow install videos to assist you with the install.

I found it a lil bit of a pain it’s easy enough to remove but my worry is the plastic clips being worn from constant removal. I think if you purchased the floating screen mount instead of the flush mount like I purchased it may be easier to remove with less issue.

@@TrailSquatch Okay thanks. That would be too much of a hassle each time removing it..

Yes it did. I have not replaced any of the stock speakers. It also increased the audio quality of the stock speakers.

There is some other features with the unit if you have a JL if I recall correctly.

The quality so far is good. No issues with the awning. One upgrade I did do to the awning was add led lights to two of the bars for lighting.

I put the new video up jus for you buddy… I know you were missin em… And yes very easy install, manual was also better then the last ones I did of there’s

No I don’t. I gave them to a friend of mine.

No. Works while in drive.

@@TrailSquatch how do i get it too play the image i could hear the audio but no video playing it says caution driver is prohibited by law for viewing etc etc

So I jus did an update on mine… and I’m getting the same thing when I’m in drive.

Thank you. You’ll want to zip it to keep dust and moisture out. You’ll also want to use the straps to help hold the cover while traveling.

Thank you! In the folded position it’s approximately 11 inches high add 2 inches where the ladder is in the middle, about 49 inches wide and around 77 inches long with the cover on. Each rail is approximately 6.75 inches from each edge on the bottom and in between each rail is about 30.25 inches. Hope that answers your question. Sorry for the delay in response.

You won’t be disappointed…

You’ll have to purchase the plug-in adapter for the head unit for your Sirius. The iGo Navigation installed in the head unit will need the SD card. However if your are using apple carplay or android auto the navigation off either will work while your phone is plugged in. Hope that helps.

Depends on the phone and case your running. I’m using an iPhone 12 Pro Max w/ and Otterbox. The XL fits 3.25" - 4" wide and up to 7/8" thick. The XL also fits an iPhone 11 with an off brand hardcase like an otterbox. I’d recommend the XL if your running the bigger hard cases on your phone. The arm portion I’m using is the 7cm for the phone mounts. I believe the one I use for the Garmin is the 10cm arm. Hope that answers your question.

@@TrailSquatch yes I know I have to get the XL I have a 13 pro max with case. I meant the length of the mount not the phone holder part. The rod I would say. Sorry I’m having a major brain fart.

@@JeepGirl0821 all good lol. I had a long day been out on the road for a few days when I saw you message. So the arm piece (“rod” portion lol) I have there is the 7cm

@@TrailSquatch gotcha thanks

For sure!

Thank you.

Ya, and my mic is out of commission right now. Hoping to have that fixed soon. My apologies for the road noise.

Happy to help!

The rack has two mounting areas and I attached the mount that comes with the POD to the rack. The lights are the Auxbeam 4” 18w each Floods. Here’s a link if your interested. www.amazon.com/dp/B00T62RK1U/?tag=trailsquatch 20 I’m an Amazon affiliate so I do make a commission off qualifying purchases.

@@TrailSquatch I’ll take a look. Thanks a lot dude!

Anytime. Happy to help.

Thanks, appreciate the support!

Thanks buddy!