Відео

They're actually 3d printed badges which I made 👍🏻

Any chance of you making me one? I am happy to pay.

Well actually 3 I need lol

Happy New Year 🎊

Yeah fronts no problem, rears were a slightly trickier and had to take off the rubber dampener that sits on the bottom of the spring and make a custom one , so instead of the adjuster sitting at the top of the spring we had it sitting at the bottom of the spring, works just fine 👍🏻

Really ? How long ago did you own it ??

I bought it from Jason at Deutsche Tech in Ayr in 2022 as a stop gap when waiting on a new car. His son owned it before him and before that a lady in Ayr had it. You will see his stamps in the service book. Jason took the car on from his son and put the new clutch in it and gave it a service doing all the belts etc. I had it until March 2023 when I sold it to Craig who tidied it a bit who then sold it to Kevin who you know. We all work together. Was a great car! I loved it and should probably have done more with it.

Just let me know when I can buy it back 😊

Yeah once the winters over I'll look into a new project and possibly selling, already had an offer , but I'd still like to do the interior, plus I absolutely adore this wee 225 it's a special wee car 😜

Ahhhhh no way .....I remember the cosworth passing thinking , yeah I'd have one of them ! Yeah well had a ton more work done now , she's in phenomenal condition now a wee belter , and Glazier Blue has to be one of the best colours ! Just done the Haldex again, about to customise the interior 😜

@ me and my son bought it and done quite a bit, however too many projects and sold it to Kevin. I have loads of photos that I can send you. Good to see it getting the attention it deserves.

@@scottishbeavershire that would be awesome .....if you see Kevin he'll give you my number , or message on Instagram @ravenrestoprojects .....don't fancy giving my details out here in public 🤣🤣! Yeah she had quite a bad oil leak , but those engines are prone at the back right , so got a new rocker cover gasket , did a while silicone hose upgrade, brand new OEM wings and sills from Audi, Coilovers, new alloys , yeah great handling wee car 😜

I'll have a go at reworking the cad , just let me know where to send the STL file to

@RavenRestoProjects did you paint them also bud

@@richardscott5898 yeah dude did the whole lot , happy to make the cad file up for you and email it , but I'm just rammed busy to make and paint etc otherwise I would have 👍🏻

@RavenRestoProjects no worries man that's awsome thanks cars looking awsome

@@richardscott5898 just ping me an email address and I'll get it to you once I've done the cad

I made them 👍🏻

@@RavenRestoProjects would you make some 240 ones at all mate

Have you got a file for this mate at all

@@richardscott5898 sorry was out, so you want it with 240 instead of 225 with quattro ?

@RavenRestoProjects and maybe sport in bottom of blue square what are prices bud

Much appreciated, I made them myself 😜

Yeah wheels are most definitely like clothes on a car , personal taste 😁, but that anthracite diamond cut just goes really well and breaks up the curves .......though I guess you could argue that the other way to , thanks for the feedback though always welcome and appreciated 👍🏻

Ahhhh I love the side badges 🤣 but appreciate the feedback , have thought about spacers might look into it 👍🏻

Yeah she's a wee belter now 😜

Appreciated 👍🏻

I didn't have to on these ones , but yes I have on a previous set, though they didn't have a paste on them , should have been on with an automotive gum strip which you heat and pull off , not really sure what the paste is ?

Great wee engines if you look after them 😜

Hey Gary, how'd you mean , as in use a silver vinyl ? You can definitely buy brushed and Matt silver vinyls 👍🏻

Ahhhhhh no way 🤣🤣!! Well , I bought it from someone in Ayr, lived in a castle believe it or not

Apologies Lewis , a bit more time to reply this time , was out! So yeah I bought this from a young guy whose grandparents lived in a castle in Ayrshire , stunning building, he was in the process of selling it and contents etc as sadly they had passed on, the Z3 had been dry stored and parked up in like an old bakery / garage building to the house / castle , it had a seized alternator , and nedded a few bits and bobs, sensors done to get it back on the road, was on about 52k miles i think which was very low seeimg as how ot hadn't driven in about 15 years or so , ended up looking great again , lovely cars

Appreciated, they turned out not to shabby 😉

Hey Rodger, much appreciated, yeah I might still do the arms for all it's worth , not really a fan of the Lanoguard might stick with Dinotrol and Waxoyl , but I've seen some really nice work with people using Lanoguard 👍🏻👍🏻

Hey rich, appreciate the input , I'm not sure about the rear adjusters, they didn't fit on top so made the assumption they sat on the bottom, I could be wrong, never used them before , figured it made more sense on the bottom for adjusting , and yeah I reused the rubber mount and bolt along with new bearings for the front ........I'm now hoping I have the rears on properly 🤣, soon find out when the new wheels arrive !! Much appreciated thank you 😜

Ahhhh just take your time and be prepared to heat, cut a few rusty bolts 😂, fingers crossed yours will be easy to do , good luck 🤞🏻

Ahhhh you're too kind, much appreciated 👍🏻

Appreciated , Audi have loads in stock if you're wanting brand new ones. Yeah these particular Coilovers are lower than standard even at there highest setting as the drop links supplied are about 30/50mm shorter straight out the box, once I've got the new wheels on ......I might get a shock 🤣🤦🏻

If you mean the small plastic drain water away parts , yeah I managed to use the existing ones and had one missing anyway , so I'll need to replace one 😜

Appreciated 👍🏻

Hey @bigthewig9624 always thought silver looks dated , personal preference I guess , just felt the grey lifted the car to look a bit more modern espically with the internal carbon vinyl etc, just something I'd always wanted to do !

Hey John , yeah agree and fair point , I just started doing these projects as a bit of fun so didn't quite appreciate that level of detail. All in including fixing , buying and wrapping the car was around £3k , bearing in mind it was the 1.9i engine.

Genuinely easy enough to do, patience and prep 😜, good luck

Based in Scotland I'm afraid , not USA

mtcmotorsport.co.uk/products/mtc-motorsport-audi-tt-210-225-bam-apy-amk-apx-silicone-coolant-hose-kit-blue That's the main coolant hose set, on top of that you'll need intercooler, turbo intake / outlet , servo and crank breather, just depends how much you want to do, all in was just shy of £500

😂 I have an upstairs loft conversion....indoor studio for doing wee bits and bobs 😉

🤣🤣 can't please everyone I'm afraid , appreciate the feedback though , I'm just doing it for fun and spending time with my dear old dad for as long as we have left , thanks again though and apologies

Hey morning......I'm going to Google that right now 🤣 appreciated 👍🏻

@@v6hot ahhhhh top man , thanks for that , so much appreciated 👍🏻👍🏻and makes me feel a bit better, must be engine variations across other platforms then

@@RavenRestoProjects mine is one of the first cars with the apx engine on a 2000 plate

Luckily sparks well all good, leaky number 1 injector though,new seals 👍🏻

@@RavenRestoProjects Happy days! I got the injector seals from Cloud 9. They send you the top and bottom seals as a kit.

@@Joe_Larkin ahhhhh I only got the bottoms was hoping they would supply tops with them .....curses ! I look into that much appreciated 👍🏻

@@RavenRestoProjects No problem, I actually started watching your Z3 video a while back so I was very happy to find that you got the TT BAM to work on!

@@Joe_Larkin yeah she's a wee belter, got Coilovers going on , brand new wings and sills, new alloys, new interior , got alot planned 😜

Yeah definitely going back to do those ....I thought they would have came in the kit 👍🏻👍🏻