Відео

@@RetroGamesBoy78 it is hard after level 3 yes, after playing this for a couple hours today i think the 3DO version does have some advantages over the Saturn version, i'd have to go back and try it again on 3DO.

@@chuckchristian8816 this is the 3DO version

@@mariowario5945 no mate this one is composite, done a very long time ago when i first found out a back up reversing camera screen would fit in there.

@@CaseTheCorvetteMan looks really good for composite tbh!

@@mariowario5945 yeah mate it's not terrible really!! The screen has 480 lines resolution, so it worked out well in that regard

@@ag6371 fixed it right after that, the issue was not the ground. It was the signal lines being cold joints

@@EasyRightMaybe i don't know how to change it, would make it a lot easier. There is two revisions on US, and three Euro

@@CaseTheCorvetteMan I can’t remember either, think you had to do it on controller 2 or something. The US timer should be around 7 secs or so slower than the PAL times here. Fastest I found on the net was 2’58”47 for US version, I only just beat it last night by -0.05, no way is there another 7 secs left.

@@EasyRightMaybe yeah i thought your times were very slow on your US runs, i used a Japan console with a Fenrir tonight and revision 1

@@CaseTheCorvetteMan NTSC version times are just slower. It’s probably a PAL ISO just labelled wrong, with the kph to mph changed. Maybe the Fenrir is booting the wrong version somehow.

@@EasyRightMaybe that could be it too, although i was running it at 60Hz, my Japan disc is certainly slower on the timer though

@@mouse7327 yes it is 👍

@@EasyRightMaybe thanks! I have been faster, but that was more than 25 years ago. Need to remember how i did it all, and get used to the controls again! I have done laps in the 40 second bracket on the Euro version, but the USA and Japan versions are not as well polished as this is, the handling is better and it is less glitchy than the other two.

@@CaseTheCorvetteMan I have no doubt we will work the best strategy out between us and help make each other faster in the process. Stellar effort already though. I'm happy just to play PAL as well, excited to see how far we can take it.

@@JoeHerman-r3h absolutely not, should be almost none at all.

Good stuff, the G70 is a fine machine 😀

Bad connections between the two boards inside. Bad solder joints is common.

@@CaseTheCorvetteMan thanks for the quick response! how would I go about fixing something like this?

@@teamairsoft1005 open it up and carefully remove the top board, check all the connections, the outer most pin is the ground pin, and you can solder a wire from the last pin to the track which corrects most issues.

Yes, but this is a Barco Cine 9 CRT projector, which in this setup is a front projection system. Must be a CRT projector.

It won't work on just any TV, that one has been modified to have an RGB input.

​@@CaseTheCorvetteManreally? You need RGB to get it to work? Alao you're right on the part that it won't work on any TV, tried Lethal 1 on a Sony wega and after one minute the gun won't work anymore, but in Lethal 2 game works 100% and i don't have to calibrate the TV I think Lethal 1 is very outdated and old school than the secuel

@@lunitaproductions8290 it's an arcade PCB, they only output RGB.

Thanks. No idea on size, that screen is 120" 16:9. Projector was 3.4 meters back from the wall.

Thanks!! I always have convergence as dead accurate as i can, i hate mis-alignment!

@@CaseTheCorvetteMan Yeah I get what you mean! I'm hoping to mount my CRT projector soon and want to make sure I can get it dead-perfect if I can 🤞

Set what up? I plugged the PS2 into the CRT projector using RGB, then play it like normal.

Bad connection somewhere, who rebuilt it?

@@CaseTheCorvetteMan I got it from Gary's Corvette 's they are out of Texas

@@michaelseay7513 i've never heard of them. I get all my parts for the rebuilds from Batee

About 4,500 hours on green and blue, 6,000 hours on red

@@CaseTheCorvetteMan Do you know? How long the life of the tubes, without loss of image quality?

​@@CaseTheCorvetteManTell me please. What is the minimum distance from the projector to the screen? I have a small room

@@Fighter-tube ​​⁠ i have a set of tubes with over 23,000 hours on them that are still working fine, although they have some minor uneven wear.

@@Fighter-tube depends on the screen size. You need to find a suitable projector in working condition to buy first, you really want two complete working units because if one fails you're done.

No, there was too much stuff in the room at that time. I was further back than it looks in the video.

I found an old video from back in 2012 i did on the PAL version, that was the last time i played this! ua-cam.com/video/gWVlra4HP9g/v-deo.html

Thanks mate :)

Hi mate, i have had a few requests for more CRT projector videos lately, when i do have more time i reckon i will get a few done of some various things

No idea what a "Chad" is... But yes, i use a CRT projector for all my console gaming, from 2600 to Switch.

Yep, it is still up. It is in a couple other videos

@@CaseTheCorvetteMan Have you tried PS5 VRR on Oled? seems cool!

@@AtlosAudio No, i don't have a PS5, i only use PC for any sort of modern gaming. I don't use the projector for racing sims though, i use my Pimax 8K X VR headset, it is fantastic.

This wasn't mine, i repair lots of them. It was bad solder joints on the connector that goes between the two boards. If it flashes and resets it'll be more than just the ground pin.

@@CaseTheCorvetteManmine does the turn signal thing only, if I use my turn signal the whole dash flashes.

@@gabelofi you have a bad connection inside the cluster somewhere, and it could be a few of them on that connector between the two boards.

Cheers mate :)

Yes, but at 3 meters the image size will be smaller. It depends on the lenses used as to how far back it needs to be for a given screen size.

No, i'm not interested in those sort of games. They're in very poor taste.

No, nothing special about the way it is set up or calibrated, it is a CRT projector and calibrated correctly.

Thanks :) There is an older video from some time ago that i made that shows the Cine 9.

Thanks mate, i just did a couple more with Virtua Cop Elite Edition on PS2 that are uploading now. It all works great, will be much better when i have my new games room finished so i don't have to stand as close!!

If the booster shell is cracked like this, it will not affect braking much if at all, the rear half of the booster is at atmospheric pressure when brake pedal is applied. If the break is in the rear shell half, the vacuum leak will be there only when not braking, if the front shell half is cracked the vacuum leak will be there at all times. If the diaphragm is split, the booster will not work, and with no pedal applied it will not affect engine operation. When you brake the pedal will be rock hard, and have no assist, and you may hear a hissing sound under the dash as air is sucked through the booster.

That makes very little sense to me, i don't know what you are saying there. The picture is exactly the same as CRT TV, because it IS a CRT. The only difference is the size and the sharpness, given this CRT is electro-magnetic focus and not electro-static focus it is significantly sharper than most CRTs.

@@CaseTheCorvetteMan Hmm...But for me, it is a Different TV Technology because the crt tv has a Massiv Front and by Crt Projektion has more Empty when you get of the TV but you say it is the very same Art of Technology? My Original Question is, I have a HD Crt Philipps with a Hdmi Input and has a very Greate Picture I say, much Better than Flat TV. Have this Projektor TV also this Picture? Or what you say? Because Im little Interest in this! But for me...Projektor Crt has not so good Picture as the HD Crt. But what you say? 😊

@@BeatemupMaster It is the very same, it has 3 large cathode ray tubes behind those big lenses, and works exactly the same way as a direct view TV set. A rear projection TV is also identical. The image quality from a CRT projector will depend on the make and model, this is a Barco Cine 9, and is one of the very best projectors ever made, being able to display resolutions from 640x480 all the way up to 3200x2560, it will easily display 1920x1080p, and will also quite comfortably display 2560x1440p without any problem at all. This CRT projector has 4 HDMI inputs, and 2 RGB-HV inputs, it is true multi-sync, and can take a huge variety of signals from anything old or new. The capabilities of this CRT against your Philips are night and day, i have one of those Philips Matchline 16:9 CRT direct view sets, and as good as they are, they have nothing on this projector. Not even in the same league.

Yep, i can do that, but it won't be until i get on my computer again. Need to know what hardware your have too.

@@CaseTheCorvetteMan 3080, 5600x, 16gb 3600MHz

@@abra5943 video card?

@@CaseTheCorvetteMan 3080 gaming oc

Sure, there is a setting in the menus that controls mirror mode. On the smaller cabs the monitor faces up toward a mirror.

@@CaseTheCorvetteMan Thanks for ur reply. My problem is that I cannot enter the test/service menu. The test button on pcb doesn't seem to work and I tried to hot wire 15 pin with GND but nothing happens.

@@akoshufi Oh ok, i don't know what would cause that, i just looked in the manual, i thought it was a DIP switch that set it to service mode but you're correct, it is pin 15 to GND. I did have a board here that had no controller inputs, and one of the chips near the front of the board was dead. Seems odd the the test button onboard does nothing though.

@@CaseTheCorvetteMan Thanks four ur reply and time. Yes it's very odd. I'm using supergun with the pcb and I have noticed that player 1 input not working on the supergun. Maybe there is something wrong with the supergun but I'm not sure it can cause malfunction of the test button on pcb.

@@akoshufi maybe try pressing test without the supergun hooked up if you can do that at all?