Відео

Sigma

I have a problem similar to this. My burners went out, but in a weird way, bit by bit. The large one on the left side went out first, and now, 5 months later, the one on the right side has started to go out. It can activate and work, but you have to turn it on and off to get it to work. I think I will replace the relays or check under a microscope to see if the contacts are messed up. What do you guys think? Black Friday is here, and I can spend about $600 if needed.

You're a legend man, thank you so much. This is perfect, it answers any and all questions I could have had with no fluff

Where do you order parts from?

Thanks. Helped me to replace my busted rollers

Great! Put the belt on first before you start showing how to put the belt on. I'm totally understanding.

Great Video

Thank you. I finally changed out our buzzing motor that would cause the washer to error out on most nights. LG appliance quality is extremely disappointing. We started having issues only 2 years after purchase. We've also had problems with their oven (keeps thinking door is open) and our laundry washer inlet valve went bad recently bad as we. Will not be buying LG again.

Great video, but I can't plug the electrical harness into its matching receptacle. Any suggestions? I know I have the right part and the size matches the old one.

Thank you for uploading this video, fixed my issue!

We used your video as reference to change the pressure sensor. Cleaned the drain pump filter, cleaned the air dome, and verified that the tubing from air dome to pressure sensor was clear. We are still getting the F3E1 code, but only on every 2nd or 3rd load. What could be our problem? Thanks for your help!

My LG stove stopped working overnight. The on indicator works and the timer comes on but that's all. Over, burners nothing works. Tried turning the breaker off for about 30 minutes then turned it back on and didn't fix the issue.

Thank you for sharing this great video. I was able to repair my washing machine without any problems!

hi what happens if you change the sensor you mentioned and still showing the same code . what can I do next.

Could you give the ideal ranges for the thermostat and thermal fuse in ohms via multimeter? Great video! Ours stopped heating last night after 10 + years

Is 3/9 correct for all LG models? I've got a similar head on my lmxs30796s and it looks like it's at 3/9 but I can't get the filter in.

Thank you for your knowledge. I did the diagnostic code. When I did the code from top to bottom 203,303 and 106.results for refrigerator stayed at 0 Then freezer 2336. Freezer is working just not top part of frig. Any suggestions?

Thanks for this incredibly clear video! Can anyone answer how you knew this was the problem? My dishwasher is starting to fill up, but then stops after a few minutes (maybe 1 minute) and then gives error code 1E. It then drains easily and isn't making any strange noises.

Thanks for the video

Is this part LG ABT72989206? Also does most of the LG Dishwasher use the same drain pump? Does the model LDFN454HT also use this ABT72989206 drain pump? Thanks!

Just finished changing the pump. Thanks for the detailed steps, it really helped.

Too many steps. Just unplug everything, turn the washer on its side to get to the pump from underneath the washer. You only need to loosen the pump body from the access door.

My refrigerator has the panel on top but it doesn’t have the button to test

This was the video specific to my washer. The wiring of the pump is critical and this includes that information. As typical, we spend 90% of our time just getting to the part that needs replaced. I have saved thousands fixing my appliances and power equipment myself - and it is videos like this that fill in the small details that make that possible. My hat is off to you, Sir. I just fixed my LG Front Loading Washer for 25 bucks in parts and 2 hours of scraping and banging my knuckles. Now, I get to sit back and enjoy the reward of a job well done.

I have a F2 and E3 code showing up

Just completed this on my washer model WM8100HWA. The steps were right on with very few exceptions! Prying the control face off was accurate but there was a screw on the top right holding it on as well. (Easy fix) You break the step down exactly as needed. I’ll also add that my drain area had the drain pump on the left and a circulation pump on the right. The drain pump was replaced. I left the circulation pump in. But this is still a very helpful video for my 2016 washer with the noted model number.

Just flip it on side and access it from bottom. Unscrew three screws and locking pin and voila you have the whole assembly loose. Then remove the connection pins, and hoses and replace with new one and reassemble just in reverse fashion

FIXED IT!! Only $40 for the part and tool! Thanks to This Video, I had the confidence to fix it myself. It was actually EASIER than this video shows. Lots of room to work inside this washer! Thank You for your Video!!

Those 3 screws that hold the pump assembly and debris filter are a must! If that pump isn't level you will keep getting error code even with new pump. It took me a minute to figure it out actually 3 days but I got it

Cant you show first how those tubes are. Camera is shaking so much that cant see "whole picture" about tubes. I have one small tube disconnected and donot know where it should connect. Its short and small (10mm) and it may go to trash system because there seems to be place. But still my machine is leaking.

Thank you!

Outstanding video. Thank you very much. 5 🌟

My washer is open from below and just has a piece of plastic underneath which can be removed. Im wondering if i can replace these hoses without having to take all the panels off? From below

Very detailed and thorough. Helped me to get rid of the error code, without calling in a professional. Thank you!

We replaced the water level indicator 3.5 months ago. Solved it ..... until today. Same problem.

Unacceptable product from Samsung. Clearly a design failure that was either not tested correctly with quality control or a blatant scam from the company.. Will never buy a Samsung appliance again

I'm loving the grey goose and shot glass.

F3 ERROR on LG

You can pull the wires from the board and check it from right under the lid if you won't have to take the whole thing apart to figure out if the element is open or not

Thank you

Thank you so much. Perfection from start to finish. Probably saved me a few hundred bucks

Do you have the link to purchase the locker part you replaced?

Thanks. Your video saved me some money. Good job

Can you lay this unit on it's back for easier access?

I HATE, LOATHE a feature of this washer. It is the following: When I let it fill up with water, I add the detergent immediately so that I can add the dirty clothes into the soapy water, but if you don’t add the clothes in pretty much right away, it will begin to drain on its own without pausing. I’ve wasted SO MUCH, SOOO MUCH detergent because of this disappointing problem. So much money down the drain.

Repair how to replace the slide out shelf lock on LG microwave Lmhm2237sr

What about model number lmhm2337st shelf lock

Great video, will this part work with my model number LFXS26973S/08? Thanks for your reply.

Awesome video. Thanks for helping me repair my oven 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏

So what you're saying is, if it doesn't go into full harvest mode, my ice maker is defective?