Відео

@@HiepNguyen-yh7sl I got the older ones for $30 and the Gen 2 and 3 like $ 35 a piece.

@@teamstucker624 are all 3 fit for glock 43x

All 3 it's fit for glock 43x ✅️ bro

@@ram218313 Thanks for watching and the feedback. Well I have been in manufacturing for many many years. We run very similar products for customers that are competing in the same field/market. The products that are made for them are built in the same factory/ machines each customer has completely different formulas/specification and products that goes into what they buy from us. More than likely ED Brown has better quality springs and different followers, steel tubes etc.. Kimber goes bare bones cheap for more profitable reasons. I'm not sure why my Ed Brown mags work better than the Kimber stock ones that noise dive and fail to lock the slide back almost every time 1911 is going to 1911 I will guess.

@@teamstucker624 that is very possible as well never thought of that. anyways i stick with wilson combat, but i do have a few ed brown ones and they are the same quality and work in my 1911 but i don’t have any kimbers just colt and tisas so my sample size is only to those.

@@ram218313 I used to run the Wilson Combat in my.45acp Operator Springfield back in my 45 days great magazines.

@@dbgpromotionz Shadow Systems guns can all be found very reasonable if you are patient most of mine where very cheap NIB. Thanks for watching.

Only for 17round mag n up

GunBroker is where I snagged these 2 Beretta's there's still some good deals out there if you are willing to do the work to find them.

SOLGW uses a carbine length gas system on this model with proper gas porting for super and sub Sonic rounds

@@teamstucker624 Nice. I have the 9 inch barrel .300 blk so I’m trying to be to find out if it’s a pistol gas system or carbine length.

Charter is decent and the new Taurus revolvers are a much improved revolver. I would go with most modern revolvers if you want budget friendly EAA windicator or even the new Rossi are good nowadays. Really the revolver game is pretty good as long as you stay with current production models used I would only go with Smith and Wesson, Colt and Ruger maybe Charter depending on the year it was built.

Thanks for watching and I don't run.45acp anymore the cost and ballistics 10mm just does more for less in most cases for me.

Thanks for watching most of the time these go for $395-450 on GunBroker in stores the price is much higher

Got the compact version a week ago for $470 brand new @ locked and loaded. Think they said they had 40 left before I purchased. 2 15rd mags. Palm swells. 2 spacers. Crimson Trace light. No tax. Only shipping fee. Think it was $10ish. Than obviously the FFL fee to pick up at your local gun shop

Thanks for watching

Thanks for watching GunBroker those Smith and Wesson are cheap in most auctions

​@@teamstucker624so u bought it new or used?

Thanks for watching

The 586 is a great revolver hands down my favorite model. Having a no dash and a dash 1 with the inspection sticker is pretty rare. Thanks for watching.

Yeah my big hammock hands are just a little bit out of alignment for the Gen 3-4 finger groves on Glock. Strangely enough my hand fits perfectly on HK guns. Thanks for watching.

It looks kinda goofy is a true statement that being said it works amazing and it will grow on you. I have 3 of the Deltapoint micro on Glocks and Smith's.

@@teamstucker624 I have an old G22 gen 3 it might be perfect for

@@nolagospeltracts8264 Best place to pick one up is GunBroker if you are not in a hurry Delta point micro sell $150-180 a decent amount of the time new in the box it may take a few weeks to score one I have done it 3 times already.

@@teamstucker624 thanks for the tip

Yeah I have been kinda hard on this thing had it for years now still fires up on less than 3 pulls and also ran it in a Halloween 🎃 Haunted house for our local volunteer firefighters worked every time I had a group run bye LoL.

Thanks for watching

Thanks for watching it's not a bad idea spare gun and we do have 2 hands so makes sense for 2 revolvers LoL.

Thanks for watching and congratulations on your first handgun .38spl for practice I like PMC and American eagle as far as carry home defense I run Underwood.38spl+ P 125gr XTP JHP it's hot loaded .38spl revolver ammo.

@@teamstucker624 Thank you for the assistance in determining what I need to purchase for my revolver. Your video is helpful and informative, especially as a new handgun owner.

@@ppl6724 Np glad to help out be safe and get some training/practice in. I hope you enjoy your new revolver and welcome to the wheel gun club.

Thanks for watching and This is my first WUM-1 and now I'm on the search for a straight cut one to go with this one. I had a WASR back in my youth and it was decent this WUM-1 is was smoother and very nice for sure. Thanks for the advice on maintenance for the rifle.

I had a PSO-1 scope on my Romanian rifle. I had no luck with the Russian scope it was off center of the barrel, and hard to used when you are a left hand shooter.I got a 4 to 5 group at 100yards. With cheap Russian ammo.Then I got a cheap side scope mount and a red dot sight for CQB. This really work well at 100 yards. Now I going to try out this spring with a Leopold 3x9x40 scope and this scope is centered on the barrel. With some hornady ammunition. I have seen with quality ammunition u can get good 2 inch groups at 100 yards To keep your steel AK-47 mags maintenance, free from rust .A few years ago I spray rust oleum bed liner on the outside of steel mags . This gave the mags a texture finish and better to grip when your hands are wet. In the past I had all kinds of AK maker. Don’t fall for the idea that Chinese AK are the best. For the money today a new Serbian AK in 556 for less than $1000 will run circles around any 40 year old Chinese AK in any caliber that sell for $1000 to $4000.

@@scottflowers7780 Thanks for the magazine tips and I have a Norinco NMH91 it's a good looking rifle for it's age and I have 2 Arsenal Sam7R 61 guns with a couple M10XZ painted up in camouflage colors. I have always wanted to do a Russian scope build one day they look cool.

@@teamstucker624 I had a NMH-91 16” barrel and pay $240 in 1996.I seen one on UA-cam channel at a Florida gun shop $3800 turn into RPK. The best all around Ak I own was a Bulgarian 93SA. Always wanted a RPK but I can’t see paying $1500 when I pay $240 to $500 back in the 90s.

@@scottflowers7780 The AK market is crazy high nowadays for really any decent one and those pre and post ban guns man people are getting really insane on prices. I got my Arsenal Sam7R 61 for just a bit over $1150 still pricey but not 1500-1800 like most people are buying them at. I'm all about getting a decent price or I walk away from the gun.

Thanks for watching and I agree on the cost I have never been a big Springfield guy great guns for sure. I'm stuck on my Glock, Shadow Systems, Smith and Wesson, Beretta band wagon.

Thanks for watching it's a well built America AK I scored another DPMS for like 10 bucks less regular fixed stock in Plum color.

Awesome thanks for watching enjoy your new revolver.

Thanks for watching Yeah these are good guns from back in the old days Romanian AKs are very good guns when built correctly 460 is a great deal for sure.

Thanks for watching I really like that throw back looking furniture this AK has it's in great shape.

Thanks for watching and that's a great start on your collection of Glocks. I still have a few models to add to the collection. I'm really debating the 47MOS and a Crazy Miami themed 43XMOS Shark coast customs gun for my nex Glock.

Thanks for watching and yeah that 1911 is a rabbit hole 🕳️ you can get lost in for sure. They just look so dang cool and shoot like nothing else on earth nothing beats a classic.

@@teamstucker624 You bet and yeah I’ve owned a handful of them before but nothing now. But I’m looking to add one to my collection again soon

@@TheRussLee Yeah divorce took out my first.45acp 1911 Springfield Champion Operator and Operator Wilson combat internal out builds also my 2 SIG P220 and all my .45acp ammo. Just now building back up my collection.

@@teamstucker624 that sucks. Yeah I had a 220 elite was a awesome pistol

Thanks for watching and definitely add a 92 to your collection they are great guns.

Thanks for watching it's a nice color and stands out from the Glock basic style for sure.

Thanks for watching and it's a fun hobby for sure.

Thanks for watching just wait there's more stuff coming today.

Thanks for watching

I had nameless cut my Archon Type b slide for a red dot and they did a great job.

@@jonn8163 they’re amazing. Great work and great communication. Also the only ones who would cerakote the pocket only since I didn’t want my nitride coating replaced.

Thanks for watching Definitely a great carry gun setup.

Thanks for watching All purchased on GunBroker shipped to my FFL pretty easy experiences.

@@teamstucker624 good deal. I was looking on gunbroker and they seem to be pretty high. I want to get one since they are in Plano, Tx and I’m also in TX

Thanks for watching. This Bodyguard is a basic cheaper double action revolver so no performance models it's not a terrible trigger. I think it relatively lite pull weight not 💯 on the lbs.

@@teamstucker624 Thanks For The Feedback...

It's a solid gun takes a minute to get used to the straight pull back design its a bit heavy for a rifle it's size and holds sub MOA groups with the right loading for what I use it for target shooting it's great everything I wanted. My only complaint is the cost of spare magazines they are 75-89 dollars.