![glenny314](/img/default-banner.jpg)
- 37
- 10 015
glenny314
Приєднався 12 бер 2007
Installing a dashcam in a 2023 Ford Bronco Sport through the under hood fuse box
Explaining how I wired the dashcam through the under hood fuse panel. I tapped into a powertrain control module circuit. Requires a little trimming of the fuse box, and leaving a cover off.
Переглядів: 516
Відео
Fundamental operation of a hanging garage heater - Modine Hot Dawg 60
Переглядів 1,7 тис.Рік тому
This video covers the basic operation of a hanging garage heater to help with troubleshooting
The Martins
Переглядів 82 роки тому
This is not really a comparison video, but I discuss my 1996 HD-28 and my 2021/2 (not sure which it is until Martin updates the S/N list!). I talk about my limited understand of the differences between the tone woods. So my "facts" regarding wood rating by Martin may not be facts at all.
Why so many guitars?
Переглядів 192 роки тому
People see my collection and often ask "Why so many?" They think I have them just to have them. Actually, they all represent different things and/or have a unique purpose. I decided to make a video to explain this. I have all I need right now, no more, no less (well, one exception which I may introduce to you soon enough).
2001 Yamaha WR250f YZ250f no fuel from carb to engine - part 1
Переглядів 1,8 тис.3 роки тому
Rebuilt top end and carburetor - won’t start. Engine getting no fuel from carb, float fills nicely. Carb is OEM Keihin FCR MX37
Adding a USB Charger to a Harley Davidson Sportster
Переглядів 1,7 тис.4 роки тому
Adding a USB Charger to a 2011 Harley Davidson Sportster 1200 XL Custom.
1981 Gibson Les Paul XR-1 vs. 2016 Gibson Les Paul Standard
Переглядів 8877 років тому
Comparison of two generations of Les Paul using the same part of a song.
Gibson Les Paul 1981 XR-1 vs. 2016 Standard - Features only
Переглядів 9577 років тому
A side by side walk through comparison of two generations of Les Paul another video will compare playing them. Feel free to add more or correct me in the comments.
Routing channels on delicate wood...massive bits better or are lighter bits better?
Переглядів 677 років тому
Routing guitar binding channels..
Applause AE-38 old info needed if you have any
Переглядів 1,3 тис.7 років тому
An old applause (Ovation low end cheapo model). Fantastic guitar. It really is. I am just wondering if anyone can tell me any more about it. I know it isn't worth much, just wondering when it was made and why oh why they thought that headstock was a good idea!
Replacing fuel lines on small two cycle motor for a hedger or chainsaw
Переглядів 97 років тому
Threading the tubed into the fuel tank can be tricky. Here's a neat solution.
Stringing and tuning so that the guitar stays in tune
Переглядів 337 років тому
Stringing and tuning so that the guitar stays in tune
Selecting a cheap guitar for beginners
Переглядів 337 років тому
Selecting a cheap guitar for beginners
Emily's Island Adventure with Maizy...
Переглядів 1811 років тому
Emily's Island Adventure with Maizy...
i had one in the 1980s .do not get rid of this .its made in korea not china which is better quality $129 new .i traded it for the real thing a usa made ovation elite guitar .5 times better than this applause .but now on ebay you find these going in the 300 dollar price range ,i wish i kept it .because it has a nice sound big bowl low action worth keeping
I just spent way too much much time trying to find a fuse to check and make sure it wasn’t blown. The fact that the manual doesn’t say anything about it being underneath is ridiculous. Thank you for the clarification. Good job installing the dash camera.
What fuses did you use for your install? Have you had any issues since the install?
So? No update?
Was is succesful
Do a shot every time I say “high output” . Not sure why I focused on that. I also left out that the fenders/single-coil guitars have particularly wonderful and individually unique clean tones compared with the humbuckers.
Yeah, I know. Audio is bad. I should have checked my GoPro before recording the whole thing!
The XR-1 was blessed with zebra Dirty Fingers pickups, and a common coil tap switch for both pickups. The XR-1 did not come equipped with a pickguard. Your XR-1 is actually a GOLDburst. So was mine. The goldburst was cursed with the orange peel feeling of the finish. I bought mine in the 80's used for $225. I lost it and my other guitars in a house fire in 1998. Man, I LOVED that XR-1! I've since replaced it with other Gibson Les Pauls, but not another XR-1.
You are right about the orange peel texture to the finish. I thought it might be age, but it indeed could be the quality of the finish. And the dirty fingers pickups really do make this guitar sound great.
Did it work? I'm having trouble with my 08 yz250f No fuel getting to the engine but just before
Mid body kit worked, I think, but I also adjusted the accelerator pump…Check that…make sure it is squirting…lots of good vids on this. I just have to make sure I pump it four times when it is cold, Then it starts in a couple kicks.
How do the xr1 compare to customs?
The XR1 didn't come with a pickguard. Also, there is no weight relief. The "Gibson" logo is also about a quarter inch lower than yours and is inlayed in mine. The Studio is closer to the XR2 or 3. The XR1 being a hot pickup version of the "standard" all its own.
Hey Glenny, was that xr-1 straight into the amp, or did you have some effect, overdrive? And thanks for the sound comparison!
They are both straight into the amp...just a little on board reverb.
@@glenny314 Thanks. I appreciate the demo and info
My XR-1 (81) is almost identical to yours but doesn't have a pick guard and the plastic covers around the pickups are dark colored as is the plastic piece around the switch for the pickups. Love it.
guitarstrunged I added all of the differences you mention. So long ago, I can’t remember why. When I bought it it had no pickguard and black around the pickups.
Someone probably modified it, I have done it. You can tell by the glossy finish on the headstock. Its a 90's ae-38. Maybe even a prototype from the factory. But they definitely just cut the middle piece out and ran a router around it.
andrea4809 I think you are right.
I've wanted an XR-1 ever since i saw steve clark from def leppard rock one way back when....you are very fortunate indeed sir!!!!
Any interest in selling the xr-1?
I still really love mine... Put some PAF57s in it and it sounds truly amazing... I do wish the fingerboard was bound... there are several dents in that luscious ebony...
I have an xr1 that was made on the day I was born and wouldn't trade it for anything.
This video means so much more to me now that I have a guitar. My instrument passed with flying colors, of course. "Kapwangs waiting to happen" lol
got mine at a thrift store, dirt cheap, changed strings, straightened neck, incredible guitar! now my "couch guitar". love it! headstock doesn't look like that though, very strange, looks like a missing piece.
Love the XR1 but I am biased because I own one and its the only LP I have. I have had since it was brand new. Christmas gift when I was 14 years old. Mine is kinda strange because it is solid black and according to Gibson they never made a black XR1. Like I said it was bought brand new so I know for a fact it was never refinished.
Hi I am in Ukraine I have the applause ae 38 guitar but Inot know where and when it was made, can help guitar is identical to that on video