- 14
- 64 127
JP's Bladeworks ASMR
United States
Приєднався 29 лис 2023
This channel is a branch of JP's Bladeworks for everyone who loves to watch the work without any explanation or talking. I hope this channel will help reach people of other nations who dont speak english and we can all enjoy the universal language of work. I hope you enjoy.
Making A Knife From Bandsaw Blades and Copper - ASMR
Want to buy a knife from me? See what is available here in the link below!
Website - www.jpbladeworks.com/
Patreon - patreon.com/jpsbladeworks
Amazon Lists of tools I use:
(These are Amazon Affiliate Links and this channel gets a commission with no cost to you)
Starbond CA Glue Black - amzn.to/3um4wB9
Starbond CA Glue Accelerator - amzn.to/3SH37OZ
3/8-inch Bearing Balls Tungsten Carbide - amzn.to/46PU6XI
Drill Bit, Titanium, 3/8 In - amzn.to/3uTGcXm
16-Ounce Ball Pein Hammer - amzn.to/3t9dHUT
Diamond Sharpening Stone Extra Coarse (220 grit) - amzn.to/49FKC3P
Diamond Sharpening Stone Fine (600 Grit) - amzn.to/40NAhim
Diamond Sharpening Stone Extra Fine (1200 Grit) - amzn.to/49HAveY
Axe Wax (Food Safe) - amzn.to/47yXLKt
Renaissance Wax (Non-food Safe) - amzn.to/3RjPfJR
White Spray Paint - amzn.to/46yu8Id
Follow me on all my social media!!!
JP's Bladeworks Instagram- / jpsbladeworks
JP's Bladeworks Facebook- / profile.php
JP’s Bladeworks Twitter- / jpbladeworks
Jesus Perez Instagram- / jesus_perez
Website - www.jpbladeworks.com/
Patreon - patreon.com/jpsbladeworks
Amazon Lists of tools I use:
(These are Amazon Affiliate Links and this channel gets a commission with no cost to you)
Starbond CA Glue Black - amzn.to/3um4wB9
Starbond CA Glue Accelerator - amzn.to/3SH37OZ
3/8-inch Bearing Balls Tungsten Carbide - amzn.to/46PU6XI
Drill Bit, Titanium, 3/8 In - amzn.to/3uTGcXm
16-Ounce Ball Pein Hammer - amzn.to/3t9dHUT
Diamond Sharpening Stone Extra Coarse (220 grit) - amzn.to/49FKC3P
Diamond Sharpening Stone Fine (600 Grit) - amzn.to/40NAhim
Diamond Sharpening Stone Extra Fine (1200 Grit) - amzn.to/49HAveY
Axe Wax (Food Safe) - amzn.to/47yXLKt
Renaissance Wax (Non-food Safe) - amzn.to/3RjPfJR
White Spray Paint - amzn.to/46yu8Id
Follow me on all my social media!!!
JP's Bladeworks Instagram- / jpsbladeworks
JP's Bladeworks Facebook- / profile.php
JP’s Bladeworks Twitter- / jpbladeworks
Jesus Perez Instagram- / jesus_perez
Переглядів: 3 040
Відео
Making A Nakiri From Ball Bearings With a Twist - ASMR
Переглядів 15 тис.2 години тому
Want to buy a knife from me? See what is available here in the link below! Website - www.jpbladeworks.com/ Patreon - patreon.com/jpsbladeworks Amazon Lists of tools I use: (These are Amazon Affiliate Links and this channel gets a commission with no cost to you) Starbond CA Glue Black - amzn.to/3um4wB9 Starbond CA Glue Accelerator - amzn.to/3SH37OZ 3/8-inch Bearing Balls Tungsten Carbide - amzn....
Making a Twist Ball Bearing Petty Knife - ASMR
Переглядів 11 тис.4 години тому
Want to buy a knife from me? See what is available here in the link below! Website - www.jpbladeworks.com/ Patreon - patreon.com/jpsbladeworks Amazon Lists of tools I use: (These are Amazon Affiliate Links and this channel gets a commission with no cost to you) Starbond CA Glue Black - amzn.to/3um4wB9 Starbond CA Glue Accelerator - amzn.to/3SH37OZ 3/8-inch Bearing Balls Tungsten Carbide - amzn....
Forging A Damascus Brisket Knife - ASMR
Переглядів 8 тис.7 годин тому
Want to buy a knife from me? See what is available here in the link below! Website - www.jpbladeworks.com/ Patreon - patreon.com/jpsbladeworks Amazon Lists of tools I use: (These are Amazon Affiliate Links and this channel gets a commission with no cost to you) Starbond CA Glue Black - amzn.to/3um4wB9 Starbond CA Glue Accelerator - amzn.to/3SH37OZ 3/8-inch Bearing Balls Tungsten Carbide - amzn....
Making A Knife From Copper And Chains - ASMR
Переглядів 11 тис.9 годин тому
Want to buy a knife from me? See what is available here in the link below! Website - www.jpbladeworks.com/ Patreon - patreon.com/jpsbladeworks Amazon Lists of tools I use: (These are Amazon Affiliate Links and this channel gets a commission with no cost to you) Starbond CA Glue Black - amzn.to/3um4wB9 Starbond CA Glue Accelerator - amzn.to/3SH37OZ 3/8-inch Bearing Balls Tungsten Carbide - amzn....
Hand Forging 500 Layer Damascus Chef Knife - ASMR
Переглядів 2,9 тис.14 годин тому
Want to buy a knife from me? See what is available here in the link below! Website - www.jpbladeworks.com/ Patreon - patreon.com/jpsbladeworks Amazon Lists of tools I use: (These are Amazon Affiliate Links and this channel gets a commission with no cost to you) Starbond CA Glue Black - amzn.to/3um4wB9 Starbond CA Glue Accelerator - amzn.to/3SH37OZ 3/8-inch Bearing Balls Tungsten Carbide - amzn....
Makng a Knife From Washers and Ball Bearings ASMR
Переглядів 17 тис.16 годин тому
Want to buy a knife from me? See what is available here in the link below! Website - www.jpbladeworks.com/ Amazon Lists of tools I use: (These are Amazon Affiliate Links and this channel gets a commission with no cost to you) Starbond CA Glue Black - amzn.to/3um4wB9 Starbond CA Glue Accelerator - amzn.to/3SH37OZ 3/8-inch Bearing Balls Tungsten Carbide - amzn.to/46PU6XI Drill Bit, Titanium, 3/8 ...
Making A Hunting Knife From Copper And Damascus - ASMR
Переглядів 3,3 тис.21 годину тому
Want to buy a knife from me? See what is available here in the link below! Website - www.jpbladeworks.com/ Amazon Lists of tools I use: (These are Amazon Affiliate Links and this channel gets a commission with no cost to you) Starbond CA Glue Black - amzn.to/3um4wB9 Starbond CA Glue Accelerator - amzn.to/3SH37OZ 3/8-inch Bearing Balls Tungsten Carbide - amzn.to/46PU6XI Drill Bit, Titanium, 3/8 ...
Making A Knife From Bolt Nuts - Shop ASMR
Переглядів 12 тис.День тому
Want to buy a knife from me? See what is available here in the link below! Website - www.jpbladeworks.com/ Amazon Lists of tools I use: (These are Amazon Affiliate Links and this channel gets a commission with no cost to you) Starbond CA Glue Black - amzn.to/3um4wB9 Starbond CA Glue Accelerator - amzn.to/3SH37OZ 3/8-inch Bearing Balls Tungsten Carbide - amzn.to/46PU6XI Drill Bit, Titanium, 3/8 ...
Gotta love that contrasting pop of colour from the copper!
Same
I'm subscriber 708. Great job!
Thank you i appreciate you
Another gorgeous knife, JP. Love your control of your press.
Thank you I appreciate it.
Херня. Зачем для кухоника дамаск.
That's freaking gorgeous JP! Beautiful video and build. Is that Paducah for the handle?
Its a padauk handle. I have a bunch of the wood in the shop.
That turned out very nice. Do you sell your knifes online or by order, and how much do they typically run?
Online. You can check out prices on my website in the discription.
Man that's a great knife!! When you do the coffee part of the etch, is the coffee cold, warm or hot? I've always been curious about that and never figured out how people do it. I assume it doesn't matter, but you know what happens when you assume...you make an educated guess from a limited set of facts. XD
I used to mix it hot and let it cool but now i just mix it cold. It makes no difference in the end result. Sominjustbmix it cold and use immediately
@@JPsBladeworksASMR Nice, thanks.
What liquid is used for rust removal
Muratic acid
Damn vato dont even talk in the video anymore sheesh straight to business lol
This is a different channel from the commentary one
Have you ever tried something like a small electric hand sander to help settle the powdered steel? Or would that be too much vibration? Love these videos!
Ive always done it with a hammer and had no issues so ive never changed the process. But other makers uses different tools to vibrate the cans
awesome channel! the way that canister finally came off was soooo satisfying 🤤
The easy removals are always the best.
Beautiful knife JP!
Thank you
Nice job. Very beautiful knife.
Thank you
That was the easiest cannister removal I have seen
Ive had easier 🥲
Great job sir...
Thank you
Nice piece JP. Solid work with that press.
Thanks JP i appreciate it
Già i rumori di officina non sono rilassanti, se poi sono accelerati ancora peggio , la smerigliatrice sembra il trapano del dentista ascoltando il video veloce.
Yea i have it as asmr but its not asmr because its not typical but i have no idea what to name it 😅
Super awesome pattern!
Thanks
Outstanding job yet again my friend!!!
Thank you
I like it. Has Halloween vibes. Great work!
Thank you
I think i figured out that you used the rounded to stretch the blade wider?🤔 At first, I wasn't sure if it was for the pattern. Awesome video and, of course, awesome blade!!👻🤪🌶🤘😎♾️
Thanks
Magnifique 😘😘
Thanks
Did you grind half your maker's mark off there?
Yea 😅
Love the blade, but damn, that handle is beatiful! Awesome work!
Thank you
HI Man! super video! If I may! once I saw, that one should grind off the surface of the twist, BEFORE squaring it, then you reduce the chance of "folding over" some of the "ridges" that sre created during twisting.. especially the corners of the forged and newly squared piece will have more solid and usable parts... just a quick grind with an angle grinder after twisting before one heats it up to square it.... Love your work!
Its definitely safer to go that route
Nice Knife. Well done.👍 Which Metal powder did you use? Where did you got it?
Not sure. I bought that one a couple years back at bladeshow and i already threw out the bottle so i dont remember. You can buy sum 1090 with 2% nickle from maritime knife supply though they sell it for a good price.
Why so silent in this video??
This is a no commentary channel. The commentary channel uploads sundays
It does need to be a wee bit sharper but that's a freakin' beautiful piece of art...
Thanks
@@JPsBladeworksASMR ...You bet...
Love the content. I am not a blacksmith so I don't know the answers to these questions. I hope someone with more knowledge can jump in and answer them. 1. I noticed the steel being worked when it had cooled to grey in color. I know that working cold steel can cause some kind of issues, but can you tell from color when it is too cold to work and if so at what color? 2. I use super glue (CA glue) quite a bit. I would think that it is too brittle for use in a knife handle. except for time, why wouldn't you use epoxy instead? 3. I know they use Ferric Acid, coffee, and even vinegar for etching steel. If you were to use red wine, would it etch the steel as well? If so, would it leave a reddish hue to the etching like how coffee leaves a brownish hue?
1 the steel looks cold but its still at a dull red heat. If i turned offnthe lights it would be visible. So its still safe to forge. 2 super glue with the accelerator creates a pretty strong bond but besides that once i glue up the epoxy on the inside also holds all the pieces together. And most times i dont have 7 hrs to wait for the epoxy to dry. 3 I have no idea if redwine would work.
that's a dope blade. nice work
Thanks
What is the purpose of the twist? Is it for looks or does it strengthen the steel?
Both...
Looks
@@JPsBladeworksASMR thank you
@@ICU2B4UDO actually not... I would only use twisted damascus as cladding for a sanmai blade to have this wonderful look... for a blade that needs to be strong...like a sword or so...for kitchen knife especially the ones only used for slicing and cutting fine stuff it is not that relevant... the risk of having failures is too high.... (bend test fails at higher rate)
Do you ever do any normalizing cycles before you quench? Never seen that in your videos. Lovely knife!!
I do for every knife but i dont usually record it.
❤
❤️
Beautiful blade 👍👍
Thank you
Beautiful knife 👍👍
Thank you
This is one of your best so far. Also really enjoying the ASMR stuff.
Thank you. I'm glad you are enjoying
Once again, beautiful knife Jesus! Missed the commentary though 😔 but amazing work! I’m telling you something here, you’re on to something here!!!
I appreciate it. It hard making weekly build but it is loads of fun
NOW that's a knife !!! Great job my man !!!
Thank you
That's a beautiful blade !!!
Thanks
Such fun watching you work !!! I can watch this all day !!! I really appreciate the craftsmanship that you put in to creating this master piece !!! Good for you !!! Thank you for sharing your work !!!
Thank you for watching. Im glad you enjoy it.
Great anvil work my man !!! So far so good !!! Can't wait until you are done !!!
I need more practice on the anvil 😅 i use the press more than the hammer
Me encanto!! Tremendo!!
Gracias
Im gonna be attempting my first cu-mai soon, once it cools down here in Texas. Any advice? Im going to use my kiln to heat it to 1900-1925F and i dont have a press. Im digging this new channel btw. Awesome work!
Thanks. Theres not much to it. Just make sure you dont over heat it. Especially if you are eyeballing it. Seeing the rough heat temps is something you just build over time. It might be good to just tack weld the billet so you can see your coppers heat to help you from over heating it. As well as make sure whatever hits you do to one side you do the same to the other so you can mitigate the chances of having copper cross over on your edge. Goog luck
Love the all the video’s you dropped back to back brother ! Great work as always !
Thank you
damn my guy definitely been goin hard makin an vid damn near everyday day!! Gr8 build broski
I have a backlog of videos. This won't last forever. Maybe a month or 2 at max 😅
I am recent subscriber to your main channel and this one. Love your work. Like sometimes when you are explaining things and sometimes when you don't. You are on to something here. Thanks
Thanks. I appreciate the support
This truly was an awesome build. When are we going to get a scrap canister blade.
When i get enough scraps. I should make a scrap bucket. Right now i just put it in a drawer.
I was waiting for the brisket slicing footage. 😮
sorry for the let down
WOW, I like that pattern
Glad you liked it
Outstanding!!
Thank you