Відео

@@Martinsboard I didn't realise I was breaking the rules 🫣

@@Martinsboard Also, I can't see your comment, so I presume it was removed

@@MicallefMade Yea, from what I’ve seen he can be a fountain of knowledge, but he’s a bit petty with his admin role 😂 considering the page has 20k members and you’re contributing to group content I don’t see the problem, just a disgruntled admin that doesn’t want you to get a couple of extra subs 😁

@defendermodsandtravels I completely understand what you mean. The main two reasons are, firstly, it adds a bit more protection should I bump into something or someone bump into me, pushing down the length of the 2mm chassis is stronger than pushing the corner if I caught it on something. Secondly and mainly, because it was free steel 😂

@@MicallefMade If it was a freebie that's a different matter. I wouldn't worry about little bumps - Edna will win most arguments. I have just replaced the bottom flange on the LH rear corner of my Defender and used a bit of steel cut from the old battery box which is just under 2mm thick. Because one can't keep the mud out I have made holes underneath where I can flush out with a hose. This approach has worked well and I have very little rust on a 33 year old vehicle.

@@defendermodsandtravels Haha, I hope she doesn't have to win many arguments. After watching your video I have just removed my battery box and I am waiting for it to arrive and refit. You were right that it is a sod without taking the seat box out. Rust and ally rot, the two worst nightmares.

@@red9zero ouch, I really do feel your pain

@@graham-martin5847 nice, is that with or without a wheel on the bonnet?

@@MicallefMade no wheel on front I've got 32 inch massive wide tyres I couldn't even lift it onto the bonnet if I tried as rims are steel too

@@graham-martin5847 No wonder it isn't on the bonnet haha

Hi @club86, unfortunately it is a home made thing. I bought a pair of rams for another project and they didn't suit because they were too powerful, but they worked well for lifting the bonnet with wheel. If you want any close up pictures or details send me a message and I will send them over to you. I might even be able to find the second ram.

@Club86 you don't have to buy an all singing and dancing one. My one paid for itself on the first job years ago. I had to replace my rear cross member, and the welder was cheaper than the cross member alone. I bought the steel and made pretty much what I have done on this 110. They are worth every penny when you can save for one and not pay a garage to do the work.

@@dunnetw Thank you, that is very kind and very much appreciated.

@willnorth3199 Thank you very much. I haven't ever thought about doing that, but it wouldn't hurt to add another layer of protection, I think I will copy you. Thank you for the idea.

@johnrumble424 That's great, keep us updated with your progress. I am no Oracle on the subject and you may know more than me, but if you ever have a question, just ask. I like bouncing ideas off each other.

1st time on a Land Rover, so new adventure for me too. But really looking forward to the frustration and reward. Yes I’ll defo ask a question or two I expect.

@@barnbuilds7833 Thank you. I hope you're getting on nicely with your 110 as well?

@@V8guy3500 Thank you

Thank you. I never thought to cut it out fully and fill in the gap. I will try that on the hole by the battery. keep an eye out on the next video and see how it goes. you might see a disaster unfold haha.

@@MicallefMade use magnets to keep it level go round do spot welds grind it back then run a full bead around grind it back lot of work but worth it on stuff you can see

Very neat job, but flush fit plate repair for the win 👍🏼

@rustandoil Thank you, I will try it on the next hole. In hindsight I should have done that to all of the repairs, but you live and learn.

@@V8guy3500 Thank you very much, I really appreciate the comment.

Thank you very much, I really appreciate the kind comment. It isn't anything fancy but it was all I could afford. it is a SWP 210 www.waspsupplies.com/swp-redline-mig-210-turbo-230-volt-mig-welder-1350-p.asp I bought it years ago to make a cross member and have abused it ever since. I would love an upgrade that would allow me to weld for longer before needing to cool down, but you can't have everything in life all at once.

So far so good. I am very bad at painting, always to thick or to thin, but this has been kind to me and dried very nicely. where it has been on for a few months, it seems to have sealed very well. i have used other chassis type paint and rust starts to creep through, but not with this one.

@@willnorth3199 I should, but I want to keep it as original as practicable. She will also probably only do 500 - 1000 miles a year. Thanks for the advice though, all ideas and advice is most welcome.

@MicallefMade fair enough, your doing a great job. im currently restoring a Series 1. you think yours is rusty, you should see mine hahaha

@willnorth3199 Thank you very much. Wow! I would love to do a series 1, but I have never driven one or worked on one. I would be leaping into the unknown. How do you find sourcing parts?

@MicallefMade me neather! ive never driven one, never even done a project before. im only 19! i had it set in my mind i wanted to do it, so i worked hard and did it! if u have insta ill send u some pics... parts arnt to hard, theres plenty of websites out there.

@@willnorth3199 Good for you! I would love to see it, my insta is @benjaminmicallef . It is satisfying but hard to work hard to make these projects come together

Thank you mate. It has taken many years to get the kit together but I am pretty self sufficient (most of the time). The neighbours are brilliant, I never start before 10 with noise on the weekends and make sure it is one weekend a month at most so not to upset anyone.

That's great! Unfortunately my father in law used abused and neglected the old girl as a farm truck for 20 years so it never had any love. It was also a on a cattle farm, so the muck is even more corrosive. I genuinely love comments like this, because it never occurred to me to run the welder around, lathe it down and put a new thread on. Thanks for the idea.

@@MicallefMade i always think of repair before replace just the way my dad brought me up i fix everything and anything

@@MicallefMade wish i had a lathe lol i build my defenders on my drive putting m57 in mine soon,what kinda shot blasting gear you using?

@graham-martin5847 haha same, luckily there is an agricultural engineers workshop 4 minutes from home, and they let me use their kit if I need it. Nothing fancy, I use www.toolden.co.uk/p/sealey-sb997-shot-blaster-with-water-trap-wheels-37l/ for the chassis and outside stuff. And I use play sand as the media. It is a fraction of the cost and not harmful when it blows around. I sweet it up, sieve ot and put it back in. A slow process, but again it save a lot of money.

@graham-martin5847 an M57, gosh I can dream haha

Thank you for your comment, I am making good progress now, more to come soon hopefully

I think I will do the same, just change the lot for the sake of the hassle.

I never thought of drilling them out, a little safer than fire

Thanks for the advice

Thank you, and good luck with yours. My father in law did no general maintenance. He only worked on it to get through its MOT. Otherwise, it was heavily abused.

Thank you, I am hoping to get more done very soon.

Thank you

@@MicallefMade part five already!!!

Thank you very much

Thank you very much. I will take a look now.

I have just subscribed, I will have a proper look. But it looks like you do it properly

@@MicallefMadehaha I try to do it properly but I’m no mechanic I just make it up as I go along.

Thank you

Thank you

Thank you very much

Thank you, I am hoping to have another one done in 6 weeks or so

I am glad you like it

That's great, I will endeavour to get another video done in the next couple of months.

@@MicallefMade I stumbled onto your site, and I liked what you were doing. I am kind of jealous as well as I want to do the same thing. But here in Oz, the defender is not that common 2nd hand. Cheers

Thank you very much. Hopefully the next video will be in the next month or so.

@@MicallefMade ill sub u bro seen pt1

Thank you, I will keep making the videos when I can. Sharing the story is almost as fun as the work it's self

@@MicallefMade I’m glad to hear you say that. Keep up the good work.

That's so good to hear, enjoy the old girl and its quirks. And thank you very much

Thank you very much.

Thank you very much.

Thank you. I am hoping to have another video ready to post tomorrow evening

Part 2 is now live

That's the plan. Leave as many scars as possible to show its working life. The only dents or damage I will remove are those that prevent me from making it safe or fit replacement parts like the light surrounds that were brittle and broken. Part 2 will explain the plan better than this

Part 2 is now live

Thank you. I am working on it when I can. I will post the next video soon.

I ever owned 110 defender in 1994,after 7 years, i sold it to someone who willingly to keep this powerful monster, only the clutch system is so hard to push down,no other problema, love it.

Part 2 is now live

Not on this 1st video, but I have been doing some major work that will be in the 2nd part

I have been working on it when I can. Trying to find time between work and life is hard, but I hope to have another video uploaded in a week or so.

Part 2 is now live

Is that, "I'm curious", "I'm not sure I like it", or "I find this interesting"? I am not sure which 🤔😂

Thank you, more is on the way

Part 2 is now live

I am working on it. I have been editing the second video today. Hopefully in the next week or so

@@MicallefMadeNice one, cheers.

Part 2 is now live

@@MicallefMadeExcellent. I’ll finish up early today I reckon. 👍🏼

You have to start somewhere, watch part 2 to see some reassembling

Thank you, I think I need it lol

Part 2 is now live