Відео

Length of the base line is 60-9

thank you

There is missing part in minute 4:26. How to make from this two objects one single object?

I consistently repeated the sequence of actions after the author, at 4:24 I got 12 intersection points like the author. And then at 4:45 the author already has 16 intersection points on the drawing. It is not possible to continue modeling further

Why did you use another file?

Jok na łopen suors sowtłer do balhy to mje urwali bjederka ;]

Nice videos, thanks. Something I discovered by accident: if you need a hole through an extrusion as here, it's quicker to draw the circle straight after you've drawn the object outline and _then_ extrude, because the circle will then be correctly taken as a hole running straight through. IOW there's no need to extrude the hole separately, then size its depth etc, it all happens automagically.😊

Very Good tutoring Speaks Clear and a Good Volume

Thanks friend for sharing your knowledge, I'm learning from your videos but I don't speak your language, I only learn by watching what you do, so I ask you not to use shortcut keys because in this video I don't know how you aligned these two points in the center of the piece.

This video series is fantastic. I accidentally came across SolveSpace and have been using it to create 3D parts for printing. SolveSpace is so easy to use that I've switched from FreeCad.

Here is the problem that I am faced with, at 8:12 in the video, I go to the new work plane. I try to create a point in the middle of the object near the flanges. But, every time Solvespace packs the line above the object. The 3rd point is not near the flanges, but is floating in the air? When I am in a work space, and I have 2 or 3 lines that overlap each other, how can I select the correct line? It seems like Solvespace picks the highest line in a view and ignored the depth of the workspace? Thank you.

Hi, I've just found your videos and extremely impressed with how well they are presented. I just wondered why you didn't add the circle for the hole to the original sketch - and then extruded to save extruding twice?

Just about to start with 3d moddeling. As a linux user I stumbled upon solvespace. Just did first tutorial from the website and made very slow progress. Im amazed about this video tuorial. Fast, easy to follow knowledge transfer. Thanks you!!!

Thank you for this tutorial. Point A is not correctly located, however

I don't know what I am doing wrong. I cannot extrude the model. It says over and over select work plane. I select many times but it will not give me a 3d option. What am I doing wrong?

Is SolveSpace a profesional tool?

Cool video, but you have a mistake. The hole must be in the center.

Great video, I like solvespace for recreating broken parts to 3d print. It's such a powerful program

Thanks a lot for these challenge videos. Solvespace has been my goto for 3d-printing for a few years now and it's nice to see how others work with it too. Is there a reason you opted to extrude and then place the circle instead of adding the circle to the first sketch?

Hello, iam here again. Thanks a lot for your videos. These are powerfull for me. We're trying to do a simple details with my 4 years daughter. She was happy when she had done her first cube. And for me it is the best worth like father.

Hi and thank you

Hello. Thank you

Hello, thanks. practice is the best way to learn something

Hello. thanks a lot for this tutorial

sir i have to ask.... how did you scale the UI up? my icons are very small.

Thanks a lot for these tutorials, they are great and very easy to follow. I really appreciate the time you take doing these projects. I would love to see how you would use the helix tool to draw a bolt; I know it's so cliche but I am an absolute beginner.

Wow this is a really good tutorial.. thank you.😊

Is there a mirror command when we are making 2D blueprints with SolveSpace?

Why the hell are these videos so good. Amazing stuff, project based learning makes so much sense

Please keep making SolveSpace challenges. I really appreciate them.

very powerful cad , i felt like i lost my life with autocad 🤪Thanks for showing of its secrets 🙏

Perfect tutorial. Really perfect!

JSYK I watched all of these and learned a few things! Thanks for taking the time to make and share them :)

Bro! Best videos on UA-cam right now!

The hole size for 8-32 UNC is given on the chart in your video within the column labeled "tap drill size". It refers to the diameter of drill you should use to make the hole for that specific thread. For an 8-32 UNC you'd use a 3.5mm drill. A better chart would use the measurement system the thread is in - for your imperial thread the chart should tell you to use a #29 drill (0.1378in).

Cool video! But you missed two fillets if I'm not mistaken. The upright part has has also fillets on the longer sides to the baseplate. How would you do that in solvespace, a simple arc here would leave the corners open?

Two of your videos have given me the confidence I was looking for a personal project. Take my money!

This is THE best tutorial for solvespace i have encountered than you for being so detailed and explanatory!

After trying a few CAD apps, Solvspace was the ONLY app I could use right away and get something done on my 3d printer. Your tutorials are a great help...Looking forward to more!

how do you get the property browser in the same window? I have as a separate window and it's a pain. Im using win11.

Thank you so much for explaining your process through these challenges. I'm new to precision drawing in CAD and have just downloaded SolveSpace. I did do technical drawing in high-school (Brisbane, Queensland, Australia) between 1975 to 1979 - so yes I'm in my sixties, but you're never too old to learn - but I couldn't transfer my old knowledge to the "new medium". You've helped me understand what was overwhelming, so again, thank you.

Thanks for the video, i really wanted to learn to use a cad program, you made it very easy to inderstand

you are the best

Thank you for these excellent tutorials. They very much help with finding the controls for the relevant concepts! For this solution, it appears that A isn't quite in the right place, because the intersection of the cutaway near A isn't a triangle, but is four sided. Nevertheless, the important topics are covered, and I'm now feeling more confident in being able to create the solids I am trying to design. Thanks again!

thanks!

Please create a basic tutorial for absolute beginners. So that, we can better understand the tools and the concept. This is very small yet very powerful tool in entire Category.

I think the problem with your hole in the last step is that the diagram is in imperial decimal inches (ie: SAE). The main through hole is 1/4" and the recess in the face of the part is 1/8" (.125"). Unfortunately, the only indication I see to that effect is the specification of that last hole as '8-32 UNC'.

Watching the playlist and I've learned some things. Thank you. I'm wondering though....you use H and V constraints often. Is there a reason you do not use Parallel and Perpendicular constraints instead?

This video is a great tutorial. Really clear and well explained. Your use of the icons rather than keyboard shortcuts helps reduce confusion for newbies too. As a new user, I was able to recreate this part in Solvespace without any problems. I like that in some of your videos you explain how you decide which face to start from and demonstrate where the degrees of freedom are (e.g. around 2:05), thank you.

Will it have the topological naming problem as in FreeCAD? Will it break if you make changes to your first sketch?