Відео

A corollary to this problem is the printer’s insistence on making multiple (i.e. many, too many) sets of multi-page documents, when you asked it to only print one set, or even one page. The waste of HP brand ink, both in black and in color, is atrocious. After market inks are not compatible with this machine. The HP printer instructions are skimpy in at least 5 languages, and provide NO guidance on problem solving. On the last few lines of any printed page, it is likely that it will print three lines 2 or 3 times, ruining the copy you wanted to make. However it is better than cheap Epson printers, which don’t work at all.

Solution: squeeze the curved grey piece inside the tray on the front left until it clicks to release the tray to slide it in or out.

This is the worst printer ever made. THE PAPER TRAY LOCKS SHUT. WHY WHY WHY WHY. I hate it so much. My heart is black and twisted.

Dude, you're so appreciated and loved!! Funny - I'm not alone! Finally

Makes me mad every time I have to add paper!!

How l can fix it ?

I'm struggling the same

This single issue has put me off hp. Won't be buying another hp printer. Ridiculous way to lose customers!

Whaaaaaaaaaaaaaat no way never happens 😂

Thank You!!! I love this video. It has been and continues to be a struggle! I'm sorry for all of us. And NOW that hp will only take hp ink... My hp printer days are DONE!

I just purchsed a brand new brothers HL 2370 printer and the paper tray will not pull out so that I can load it with paper. It seems like its glued shut.????

did i miss something? he never said how to fix.

I've lived with this horrible situation for 2 years. THANK YOU for this video and esp. the contributing commentators!!

The absolute dumbest design ever. Why can't HP provide a video on all these issues and how to overcome them. Definitely the last time I ever buy an HP. Don't get me started on the damned ink issue. Printers are cheap as chips but ink cartridges are outrageously priced. You must not ever update and turn off their ability to do it automatically. The absolute Barst*rdos

The video i needed!!! Thank you evryone!!!!

Just want to let you know I find your video when searching for the solution in 2023... This is still struggling people lol

Doesn't HP EVER "live" with their own products??? Jeez, they ALL do this! EVERY HP printer of this general design that I ever had does this. WHAT UTTER CRAP!

It's not you're not smart enough - HP aren't good enough to design a decent printer. Why would you want to fill the tray when it runs out when you're printing. HP make their money from selling ink at a higher weight price than gold. If they put 1% of the effort they put into forcing you to buy their rip off ink into printer design they'd have a market winner product. Sadly, they couldn't care less about their customer experience.

Of course my clutch revive was omitted! 🤣

That’s a lotta facials

inside there's the 8.4 X 11 button you hold that down and it will smoothly open the tray and close it back, but first open the tray slightly then press the 8.4 X 11 button and hold until it slides all the way out for you to put printing paper of any kind, it worked for me

I literally just bought a new HP 9015. I could not open the tray of my old 9015 so I turned it upside down to inspect and somehow ruined the cartridge tray thing. Anyway just set up the new one and it’s doing the same thing!!! HP DESIGN FLAW. I left a comment on their website. Hope they fix it.

No cake emote. Disappointing.

That’s so whaaaaack!!!!!

I thought I was going to find a solution cause I got the same problem with a Xerox printer

Damn that win was pretty dope

ua-cam.com/video/9tIj-HJ95LI/v-deo.html

That. Was. Sooooo. Stressful.

No idea how I pulled that off 🤣🤣🤣

Goood job:)!! Find out how your competition ranks better - *promosm* .

I feel like IfellasleepZzzZ had a much more impressive kill

Hopefully that video helps

ua-cam.com/video/v6Y7MsBKK9A/v-deo.html

I’ve been struggling with this same issue and just found your video. The comments helped me out! My tray was stuck open and I thought I broke it but I think it’s good now. Thank you!!

Next time “upgrade” a purple hammer for your homie 😂🤣

So much bukkake

HAHA MOTHASUCKAS!!!

Hahahahahahahaa

PSA: this is not the way you want to end up cranking 90s. You should place your walls first, THEN jump and place your floor & ramp. This is one beginners method that I find easier to do more consistently.

THANK YOU! I too was going crazy and about to destroy my printer before I read these responses. It should be this hard. Quality control in manufacturing is lacking. Otherwise happy with the 9010.

Great I thought it was just me too or dirty rollers underneath but as much as I clean the rollers the problem contines. So now I know it is a design fault so I will just keep the paper level topped up and not let it run out totally. Cheers

The problem is that the paper level sensor arm jams the tray when the paper tray is empty (which is when you most often want to remove the paper tray). The solution is to shove in a stack of paper about 1/4" thick (50 sheets or so) and the tray will slide right out. This is a design defect, can anyone call it to the attention of an HP design engineer?

Usually, an E-bike has a throttle of some sort. I see what looks like a blue button on the right side of the handlebars that might need to be pushed. I’ve never seen one where you just select the power level and go. There must be a throttle, such as a twist grip or a thumb lever/button somewhere on the handlebars

Same problems with epson WF-7511 lol I've been troubleshooting that mofo since monday.

Said no one Ever 🤣

Thanks for the video

Hi Kyle, thank you very much for sharing this video with the Bonc bike community! We have reached out to you via email to get to the bottom of the lack of power from the motor. We cant wait to see the adventures you take your Bonc Bike on.

mine came with a big scrape on the main tube. Other than that build looks OK. Have not tried motor yet as I'm charging - Fixed gear model.

4 clicks to pair bluetooth. Bikewise pro is the app

Maybe my LCD/controller just needs to be programmed? Double-clicking the M button shows a headlight icon. Triple-clicking changes from km/h to mph. Some series of clicks revealed a Bluetooth icon like it was trying to pair. There are a few audible ticks from the motor when I power the LCD on/off.