Відео

Hi, thank you for the info. Will keep this in mind next time for future videos 👍. Much appreciated

Hi, it should work with them. As long as you have alot of copies of the card 👍

Very cool idea. Didnt think about doing that 👍

Hi, i am unable to provide a link. However if you search the keyboard name from most online stores (e.g amazon, taobao, etc) hopefully you are able to find it. As for me i found my keyboard from Shopee as it ships to my country.

Sorry for the miscommunication. Its meant to be how the keycaps look like with the keyboard RGB on

Hi, I'm not too sure myself. Maybe contact customer service to see if they could help? So sorry that I am unable to help.

I think it depends on the switch iteslf. Akko brand switches for example do not have cherry keycap north-facing pcb interference. There are others on the market but I am not sure on all of them. Hope this helps For me personally i did not get any issues with this keyboard

@@hnjhobbies thank you. ❤️❤️

Congratz

Thanks. Yes, it was really lucky and was I shaking when I pulled it.

I would say yes. But if you don’t carry around the keyboard so much it should be fine. I use sanitizer wipes and go over with a microfiber cloth and the fingerprints would come off. If there are other ways to remove the fingerprints do let me know

@@hnjhobbies i own a xinmeng a66 which has a budget alu board so not used to that much. On a side note, keyverse released a lite edition of infi75 which has translucent casing unlike the abs here. They don't offer a built-in display which I don't care much about. What do you think? Will transparent polycarbonate be less prone to fingerprints? And the inner structure is exactly the same on the other hand which is great to uphold the nice sound signature like this one.

Im not 100% sure about polycarbonate if it would be less or more fingerprint prone. I think the best option would be contacting customer service or specialists who should have this info. Sorry i couldnt help much.

@@hnjhobbies no problem, thanks a lot.

TTC new moon switches are linear switches

I think they are called ‘gmk moonrise’. Hope that helps

Hi, thank you for this. Will keep that in mind for next time 👍

Was fun to revisit an old iconic keyboard. Hope you enjoyed

Use win+L

Thank you for the suggestion. Maybe might try to lookout for these switches 👍

Honestly when typing with it in real life there is no sound at all. Mainly the vibrations of the table when typing my nails hitting the keycaps. I was actually surprised how silent the final build came to be. Had to enchance the audio so the mic can pick up some sounds for the video. For mods its eva foam and case foam that came with the keyboard and i lubricated the silent switches.

@@hnjhobbiesif you’re using a phone camera to record, it’s probably the automatic gain control raising the volume to match the soft sounds of the keys. You’ll need a recording software that doesn’t use that feature.

@deterdettol Hi, thanks for this information. 😁 Much appreicated

They are called gmk owl korean keycaps. Hope this helps 👍

They are called gmk owl korean keycaps. Hope this helps 👍

@@hnjhobbies Thank you so much!

Yes north facing but also the switches that are being used. Some switches can put cherry profile keycaps even if its north-facing

​@@hnjhobbiestry kailh switches, North facing's savior.

stock sound is very good though

Ye, I agree

Yes you can use XDA Keycaps. It should not be a problem

@@hnjhobbies thank you! what website did you buy it from? i heard epomaker isn’t reliable and is considering aliexpress

@hannaht6508. For South-east Asia, the main websites would be taobao, lazada and shopee. If you do try aliexpress do let me know as I have not personally tried it

No worries. Glad you enjoyed the orginial version. I wanted to test what the tactile swtiches would sound like with this board just incase for others who were also interested to know 👍

Thank you for the information. Will try to improve.

Hi, it should work with a mac. I havent personally tested myself as I dont have one so i can’t be 100% sure.

Hi, so sorry that I am not 100% sure. There is a keychron software that unlocks more customization for the keyboard, maybe could start from there?

Hi, I’m unclear what do you mean by this?

it sounds pretty good in my opinion, its preference tho

@kekytom yes, i agree. But glad you enjoyed it 😁

​@@hnjhobbiesi'm sure it feels great, but it just sounds unnaturally high pitched

@@hnjhobbies too much sound from desk

Hi, the switches come lightly lubed from factory. I relubed the switches in the video.

ok thanks@@hnjhobbies

They are called “Mizu Wave Coral pbt keycaps”. Hope this helps

@@hnjhobbies thnk u <3

I think it could be from the switch and foam layers. I did not add any tape mods to it

Hi, when using akko switches, you can use cherry profile on north facing without any issues.

@@hnjhobbies Thank you for you quick comment. :)

no interference with long pole switches

@BK-nm4nq if the switches have long pole then you can use cherry profile keycaps

@@hnjhobbies that’s what I said

Thanks, happy you enjoyed 👍

Hi, to answer your question, yes the stabs did come lubricated. Also the akko lavenders are tactile or if you prefer ttc new moon linears.

Thanks for answering my question on the stabs @@hnjhobbies . Yeah, I have the Akko Lavenders on one of my keebs. But I had never heard of the Moon linears before.

Hi, the display would showcase the time and battery%

When i built this specific one i used Lazada/Shopee which is similar to amazon for southeast asia to get these keycaps

Glad you liked it 😁. Hope your build works out well 👍

Glad you enjoyed. I also enjoy those keycaps as well 😁

😁 thank you!

Thank you so much! Glad you liked it

Hi, for the keycaps in the video that came with the RK98 model that i used was PBT. There arent any huge differences between PBT and ABS unless they say ‘double-shot’ within their keycap specification. This means that 2 layer of plastics is used to mold giving them a thicker wall, making thm more rigid compared to single shot. If the spacebar is too loud, spacebar dampeners are available. However, a more budget friendly solution would be to fill some of the spacebar gap with a littlebit of foam Hope this helps, and feel free to ask other questions, will try to answer the best i can 👍

Hi, thank you for the comment. Im not 100% sure how to change these settings unfortunetly. My best guess would be computer settings to usb devices. Or maybe there is an application for the keyboard that can be downloaded to the computer to have more customizability?

The kit comes with pe foam which was used and the slight clacky sound may hav come from the switches and lack of case foam (i like the clear bottom to see through to the pcb). Case foam could help dampen some sound but i quite like it how it is.

Am also planning to test out tactiles with the same keyboard specs so keep an eye out for that

There should be clip on tabs on the top case. Maybe if there is something that you can use to wedge the gap, that might help?

@@hnjhobbies Thank you for getting back to me! I ended up figuring it out a few minutes after posting that comment.

Glad you were able to figure it out :)