- 49
- 13 973
mykle196
Приєднався 17 лис 2007
I'm not an expert at anything and it isn't always pretty but I make things happen. Sometimes I make things worse before I make them better.
Manually shifting a 4l60e or 4l80e transmission without a computer. A better way? plan 1
The pinouts talked about are for the 4l60e, not the 4l80e but the 4l80e is discussed when covering the switch plan.
What I think is a better wiring plan than what I have seen elsewhere for manually controlling the shifting solenoids on a 4l60e or 4l80e transmission. Plan 2 to follow. Plan 3 is on the drawing board but might take a while.
I know how it all works already, just show me how this plan is different 9:40
What I think is a better wiring plan than what I have seen elsewhere for manually controlling the shifting solenoids on a 4l60e or 4l80e transmission. Plan 2 to follow. Plan 3 is on the drawing board but might take a while.
I know how it all works already, just show me how this plan is different 9:40
Переглядів: 73
Відео
square body project #15, time for a test drive. 350, sm465
Переглядів 5714 годин тому
From seized up to driving. Our rescue project square body hits the streets.
Wiring plan for building a LS engine OBD2 PCM bench harness. Just the info, nothing extra
Переглядів 4021 годину тому
Short and to the point. Just the info, nothing extra.
Building a LS engine OBD2 PCM bench harness, it works for an 8.1 496 also
Переглядів 16521 годину тому
We need to remove the VATs and O2 sensors from our 496's computer using the free tuning programs, so, we need a bench harness.
Buick Skylark project #17 Just putting in work and finding more rust
Переглядів 29314 днів тому
Just putting in work and finding more rust
Buick Skylark project #15 prepping the rusted out roof for a fiberglass shell and then bedliner
Переглядів 2,4 тис.28 днів тому
We use vinegar, a flap disk, wire wheel, sander and rust converter to prep our rusted-out roof to have fiberglass and then bedliner put over it. Basically, a faux vinyl top. For those of you who have watched previous videos... the plastic sheeting I used to tape it off with has a lot of rust on it, the areas I've primered previously are not rusting.
skylark and square body projects #14, see what we found in the trash
Переглядів 257Місяць тому
I'm in charge of sanitation for our city, my son is the loader operator at the county transfer station. Some times we pick some good stuff out of the garbage. Today was one of those days.
skylark project #13, digging into our auction purchased 454
Переглядів 1,6 тис.Місяць тому
Digging into the $50 454 big block chevy we purchased at an auction to find out what we have.
Square body project #13, It runs
Переглядів 93Місяць тому
Square body project #13, It runs. Took us a while, but considering we bought it expecting to junk the engine since it was seized, and the carb was completely locked up too...we're calling it a win.
Square body Project #12 making mini screw jacks to align a warped exhaust manifold
Переглядів 3162 місяці тому
K10 Square body Project #12 making a mini screw jacks to spread and align a warped exhaust manifold. I didn't want to spend the money or wait to receive Lisle expanders, so I made my own spreaders. You can too. If you're checking out this video, then you have something in common with myself and everyone else who checks it out too. Tell us what brings you here. Are you working on a restoration p...
DIY in deck stock tank pool, my honest review after 1 year.
Переглядів 1052 місяці тому
We installed an 8' poly stock tank, swimming pool in our deck 1 year ago. This is a review of what we did and our experiences with it.
Buick Skylark project #12 the quest to get titles part 2 (success)
Переглядів 302 місяці тому
Getting a title for an antique vehicle purchased on a bill of sale in Kansas. If you're checking out this video, then you have something in common with myself and everyone else who checks it out too. Tell us what brings you here. Are you working on a restoration project too? Have videos on your channel? Let us know.
K10 Square Body project #11 more engine work
Переглядів 902 місяці тому
Slow playing the square body build and cleaning up some loose ends while deciding if it's going to get the 454 or not. In the meantime, we do get the 350 heads put together and put on. If you're checking out this video, then you have something in common with myself and everyone else who checks it out too. Tell us what brings you here. Are you working on a restoration project too? Have videos on...
Buick Skylark project #11 trim removal
Переглядів 2362 місяці тому
Removing chrome trim etc. If you're checking out this video, then you have something in common with myself and everyone else who checks it out too. Tell us what brings you here. Are you working on a restoration project too? Have videos on your channel? Let us know. Rear of hood and top of fenders :40 windshield and rear window trim 5:20 Door side trim 8:48 vinyl top trim 11:27 drip rails 15:02 ...
Skylark #10, Square body #10, so much needs to be done and I go to an auction instead.
Переглядів 5002 місяці тому
So much rust to remove, engines to tear down, an engine to put back together, a carb to finish, I haven't even started on brakes yet, the interiors are all trash.... screw it I'm going to an auction and buy more stuff. See what followed me home. If you're checking out this video, then you have something in common with myself and everyone else who checks it out too. Tell us what brings you here....
square body #9, nitrophyl and brass float test and initial set up on a Holley 3310-2, 4160
Переглядів 662 місяці тому
square body #9, nitrophyl and brass float test and initial set up on a Holley 3310-2, 4160
K10 square body project#8 doing some engine work
Переглядів 502 місяці тому
K10 square body project#8 doing some engine work
Buick Skylark project #9 more rust removal and primer. We use vinegar on the trunk lid.
Переглядів 9632 місяці тому
Buick Skylark project #9 more rust removal and primer. We use vinegar on the trunk lid.
Buick Skylark project #8 can we un-crunch a quarter panel part 2
Переглядів 4832 місяці тому
Buick Skylark project #8 can we un-crunch a quarter panel part 2
Buick Skylark project #7 removing rust on the roof. Does vinegar help?
Переглядів 1 тис.3 місяці тому
Buick Skylark project #7 removing rust on the roof. Does vinegar help?
Buick Skylark project #6 can we un-crunch a quarter panel? part 1
Переглядів 1313 місяці тому
Buick Skylark project #6 can we un-crunch a quarter panel? part 1
K10 square body project #7 Holley 3310-2, 4160 disassembly
Переглядів 1083 місяці тому
K10 square body project #7 Holley 3310-2, 4160 disassembly
Buick Skylark project #5, let's remove some rust
Переглядів 1323 місяці тому
Buick Skylark project #5, let's remove some rust
Buick skylark project #4 Getting at the timing chain
Переглядів 563 місяці тому
Buick skylark project #4 Getting at the timing chain
K10 square body project #6 front end and piston removal
Переглядів 423 місяці тому
K10 square body project #6 front end and piston removal
K10 square body project #5 unbranded 2701 intake unboxing
Переглядів 193 місяці тому
K10 square body project #5 unbranded 2701 intake unboxing
Titling an antique vehicle purchased on a bill of sale in Kansas
Переглядів 163 місяці тому
Titling an antique vehicle purchased on a bill of sale in Kansas
Buick skylark project #3 compression test
Переглядів 193 місяці тому
Buick skylark project #3 compression test
K10 square body project #4 front clip
Переглядів 223 місяці тому
K10 square body project #4 front clip
The second plan seems like it’s going to be a lot easier, but either way works good job
Ha, easier he says, the converter lockup on a relay part is kicking my butt, I can't find a way to make it latch with the load being before the relay. The rotary switch for gear selection is cake though.
@ once you figure it out it’s gonna be awesome.Less switches is always better. Anyways, this is over my head.😂
Great video with very good instructions. This will help who need it! 👍🏻
Thanks JD
Mykle I love it!!! I need one of theses😂
Thanks. It was a good day. Saw you've started on the rear quarter on your Firebird, you're making progress there, looking good.
Any little bit done to the car is progress moving along which is a good thing
True. Thanks JD
It's a big project for sure. Just keep chipping away at it. I wouldn't set a timeline, just get it done when you get it done.
@@barefootpedaldude7755 Good advice for sure. Thanks.
I like that year skylark. But my favorite year is the 67
The more time that passes the more I appreciate all of the 60's and early 70's stuff.
Honestly I’d fix the roof clear coat it drive it with the patina
@@philh9238 I like the concept, but that's a LOT of patina. LOL
Nice project. Looking forward to see the finished project.
Thanks. Gotta admit I'm a little nervous, it will be a big job for my first time fiber glassing, but what the heck, I'm going for it.
I cant wait to see this completed!
I vote bigger cam!
Thanks. I'm thinking of going with a summit 1301
I had a sweet 72 skylark. Matalic candy apple green with white top. 350 superrocket w/shift kit. The one I should have kept. Loved how the doors closed so smooth and solid.
Nice! I wish this sight was more interactive. I'd love to see pics of that.
Awesome car. Good luck with your project! Thanks for posting. I am a new subscriber.
Thanks. Your channel looks really interesting. I subbed and will be checking it out.
@@mykle196 Thank you so much for saying that. That really means a lot to me. Please feel free to share the link and Happy Thanksgiving!
Should have pressure washed ot with hold tight and water , blow the water off. It won't flash rust and if you keep it in a garage and don't let water get on it. You will have two weeks to get primer on it
No slicks......
True, good point. Easier to replace tires than it is transmissions.
@@mykle196 Yeah let them spin a little. Easier on everything.
Hahahaha thanks for the shout out!!!!! I love the Skylark. Back in the 90s when I was a teenager. One of my buddies had one so they hold a special place in my heart. Glad to see you’re not parting it out.
You deserve the shout out. It's hard to see any old car with any cool factor end up at the scrap yard.
@ I think what you’re doing with the roof might actually work. I’m committed to this one. I want to see the end product.
The Allen key looking things might be for a piston ring compressor
Thanks JD. Appreciate it.
Congratulations on your purchases.. after you put a cam in that motor I guess if you keep your foot out of it you'll make the transmission last
Thanks. We will find out I guess.
Bigger cam! My vote counts twice
LOL, I know right. It feels like it has to happen. But man, that's gonna pull on a thread that keeps unraveling. Looking forward to your next update on your firebird.
Hat tool are you using
It's a dual action sander from harbor freight.
Cool
Yay!!!! She’s alive!!!! Good job thanks 4 the update!!!
Thanks JD
What is your plan on repairing the rotted out roof?
I honestly don't know yet. A few options.. 1. Do nothing, I bought it as a parts car, just keep it that way. 2. Do it right, put a new roof on it. It really needs a new quarter also and is missing the front bumper, grill is cracked etc Probably more $ than it would be worth. 3. Fiberglass it where the vinyl top used to be. If the fiberglass depth is in the ballpark of what the vinyl was the trim will hide it 4. Fiberglass but with a top layer of carbon fiber 5. Kevlar it instead of fiberglass, just seems like it would be cool to say it had a Kevlar roof and I happen to have a bunch of it I picked up for free, but it's in 7" wide rolls, and is pretty thick so would be harder to work with than fiberglass. I'm open to ideas / opinions.
Wow! I’m impressed!
Thanks JD. That's a good new video on your channel. Looking good.
@@mykle196 I’ve just never seen anyone do this and I actually work is this a normal thing or did you come up with it?
@@JDFirebird I didn't come up with the idea, just a simpler and cheaper version made with stuff that's easy to get.
Thank you for taking the time to help us out. I appreciate the video.
Thank you Allen, I appreciate you saying that.
I love seeing the projects keep the videos coming!
I’ve always told myself this if your video can help one person it was worth it. You helped me
LOL, it would have helped me too, that's why I had to do the follow up. You're putting in work on that Firebird, it's fun following along.
@@mykle196 thanks man I’m gonna try some full length videos. I’ll see if those get any attention.
@@JDFirebird Looking forward to checking them out. I'm gonna try a short.
Good info! I’ve always wondered about buying a car with bill of sale. I’ve always stayed away from buying a car with bill of sale. Now I may look into it. Thanks for all the info. Keep up the good work.!
Thanks JD
Good job buddy let me know if you need any metal work done to the car. Be happy to make a video with you.🤪👍🏻 And I’m really digging the Skylark. There’s a couple for sale near me. You may have just inspired me.
Thanks JD, appreciate it. And anyone who reads this should check out JD's channel it's entertaining and informative.
If you have an electric or air air needler it does wonders in thos kind of situations.
I didn't even know those existed until about a month ago. Mechanic at work showed me his. I need one.
Is that a 69 buick skylark custom? Mine was originally blue repainted white and could smoke a tire for a city block.
Yes it's a custom, the green one in the garage is a plain jane one with 350 badges. Kid down the block from me had one when we were in school, I always liked it so when i saw these I went for it.
@@mykle196 I paid $150 for it at a poker game. Good old car.
@@johnchaffin5494 LOL Nice! The good old days. I sold my Challenger when I joined the Army for $500. Wish I had that back.
Cool!
Vinegar trick is pretty interesting. I'll have to remember that. Looking good.
It's kind of a fun thing to give a try. Thanks for watching
Good job!!! What type of primer are you using? You may want to use epoxy primer if that thing is sitting outside.
@@JDFirebird It is outside for now, but I have a cover on it when I'm not working on it. I know I'm going to get criticized, but I'm using rustoleum etching primer on the first layer. Availability was the main thing, the auto parts stores didn't have any etching in stock, the price was a bonus.
@@JDFirebird Checked out your channel. Nice combination of funny and informative.
@@mykle196 the self etching will be just fine. The acid in the paint will help with any missed rust. cool vids i love seeing the old school style videos hard to find anymore. Everything is big production fake videos
Good work!
Thank you.
Checked out your channel JD. Nice combination of humor and information.
@@mykle196 thank you! i try to be different from everyone else
Spray on bedliner , the whole car
Man that’s really cool just ran into your videos. Do you have any close up pictures would love a newer video
Check out weaponsguild. There is a build thread on this that is 8 or 9 pages long, from concept, through lots of "I'm stuck" moments to finally what you see. There is also a 2020 contest thread on it that is more of a summary. If you like this build you are gonna love that site.
Where`s your dust mask. Not very smart.
Sir, you need a roof replacement.
LMAO. Cold hard facts. Appreciate it.
good job, might be better to just replace the entire quarter panel,,,,, but at least you are trying... you can try heating the metal up a little to make it more flexable
Thanks. Still having some issues getting a title on this one so not throwing any $ at it yet. But you're probably right, if I do build it a new quarter and roof are probably the way to go.
@@mykle196 Yeah, sometimes it is a hassle trying to get a title,,, I have turned down a lot of good deals because of no title, it can be done, but a lot of work and headaches
It's got that rusty patina for sure.
Yeah, it's going to be a project for sure
Getting them freed up is always a waiting game, nice job. Good looking truck, I've always been partial to square body Chevy's and 70's Fords.
What’s the link for your spacers??
What tire size and adapter should I did you end up using in the wheels. 1.5 front and 2” rear?
Can you link the spacers you ended up using after the drop?
Good video, thanks. Is there a way to build up nv3500 for more power?
Thanks for watching. I do not know about beefing up the nv3500, it is something I plan to look into moving forward. I added the shift points I calculated to the description. It's my current project vs a couple from the past.
I have that gun too. It also looks like Eastwood Concours LT100 but they call it hvlp. Its 4.5 cfm @30psi and looks like the old Iwata LPH400. I use 3M 26003 PPS 2.0 Spray Gun Adapter 16 mm Female, 1.5 mm Thread on mine. 20 gal Husky quiet compressor, I removed the manifold style regulator because it was so slow to recover, pressure drops significantly. Replaced it with a high flow regulator and added 2 water filter separators. Ball filter and a small regulator at the gun.
Thanks, that's some really good info. I appreciate it.
Very cool, 1st 43 "Shorty" I have ever seen. Nice work!
It's alive! That turned out great. Very nice work brother. 👍