Відео

Hi nice idea has it rusted? I would have painted the washers too

Thanks so much for making this detailed step by step video!! I cannot seem to get a hold on anyone to come maintain mine so I’ll be maintaining it myself after watching your video. Mine reads schedule A. Thanks much 🥰

Nice thanks

I love your video very informative it will help me when I assemble mine thank you 👍👍👍👍👍

Great video thanks! just started my pressure washing business and it’s about time I do some maintenance on my pressure washer.

I use newspaper to dry the window,and it works good

Biggest flaw of the trailer is that the frame doesn't conduct the ground due to the powder coating. Get yourself 50' of white wire to run to each light.

Thanks for posting my friend. Exactly the instructions I needed.

Thanks man, got my stuff running!!

how do you remove the tailgate?

❤

Never leave tools at the open in homedepot, many are getting stolen the equipments and tools from the trailer.

Mark the bolt, because over tight will be broken the screw

my pump oil from AAA simpson is red and i added one full pint and still cant see the fluid in the oil level glass. Im confused about what im seeing. Is it overfilled or under filled.

Ahhhhh. That's genius. Attach the fenders to the bed sides. I upgraded tires and now there's barely a gap.

What gpm and tip are you using?

How much weight can towing?

This great video and I hope it helps a lot of ppl as it helped me coz I had no idea how to change neither of the oils. Thank you

How are you my friend by chance do you work at 711?

How much would you charge someone to clean their windows?

When did having a insurance on a trailer is a law?

Great video!!

Thanks mate, very helpful for me. Honestly I got this problem

Great video ! How high can the boards go ? Asking for a friend in junk hauling

Great help. She's purring like a kitten.

hi can you show how to connect the cables to the trailer lighting

hi can you show how to connect the cables to the trailer lighting

hi can you show how to connect the cables to the trailer lighting

Quick conecter they are not good best too solder all connections

My pump is a remmington

عاشت ايدك استمر بملخصاتك ❤

I recommend to all considering one of these to buy the 1720 lb like this one rather than the 1195 lb trailer. It's only $30 more but comes with box-channel tow bars and cross-members rather than C-channel. The tow bar brackets are also stronger, and it doesn't need the tongue reinforcement plate so you can place the tongue jack inside the a-frame. After fully assembling the two sections separately but loosely and upside down, bolt them together and place them on cinder blocks or something else to raise it at least 6", still upside down. Using a square, tighten the TOP bolts (which will be on the bottom) first, then make sure the rails are vertical and tighten the BOTTOM bolts. This will ensure the rails and cross-members are the same in relation to one another around the entire trailer. I placed heavy nylon washers between the tow bars and brackets to avoid wearing the paint. Install the Leaf Springs using only the front bolts through the eyes. Install the axle on top and the U-Bolts with the nuts hand tight. Swing the entire assembly forward and you'll have easy access to the nuts since they need to be torqued to 15 ft.-lbs. Install the Fender Brackets but not the Fenders, and then the wheels. Once installed that is when you flip it. Leaving off the fenders prevents damaging them. Start at the plug and work your way back, after making sure you have enough length to connect to the car and allow sharp turns in both directions. I recommend butt splice connectors and heat-shrink tuning, or the heat-shrink butt splice connectors. Do not use automotive tap connectors or wire nuts as they are not suitable for weather exposure. Also, don't use electrical tape. It is only intended for temporary use while assembling systems and will become gooey and let go, especially when exposed to the weather. Use rubber tape instead. Run a ground wire to each light. These are pre-painted and bolt together, so they do not have good electrical continuity. It will also eliminate needing to remove paint. Full grounds will save you a lot of hassle later. Wherever the wire passes through a metal hole, use a rubber grommet or add two layers of heat-shrink tubing to the wire to prevent wear of the insulation.

You sound like a russian viking lol

My pump is lite brown too

Thank you for the video, I am looking at the four foot long version. When you get the locks for the rear gate, are you going to remove the screws, so that you can easily pull the back off and on as needed?

After you get done with your trailer you need to find some where to wight it so you can deduct it from your maximum weight that will be what you can haul safely on your trailer.

Watching this video help me build my trailer with no problem. Thanks for the video

Very helpful. Thanks 👍

Thanks mate that's very simple but useful.

Yes

Did you change the 2nd spark plug in the back??

Great vid, thanx!

Should we use Zinc, Stainless Steel or Galvanize Bolt and Nut? Thanks.

Thank you for uploading this tutorial. It's very helpful.

I use slit loom on all my wires and also a ground wire to all lights.

Do you think my Corolla will be able to tow a seadoo?

I like how in the background people are continually getting their food from the drive up window!

Good job

😂😂😂😂

Spilled his Frosty.