Відео

Yes it can. My sister experienced that problem with her 2017 Mazda CX5 earlier this year. Battery was constantly draining and alternator checked as the source of the problem after battery was replaced. Turned out to be the BCM

AI couldn't tell you bro # no real life experience😂

No problem, Its out pleasure and I hope this video helped you out and thank you for watching and checking out Uzbasic Motorsports Performance Parts. Have a great day.

Sorry about the transitions my friend...unfortunately it is the program we utilize. Thank you for bring it to our attention. We are checking for a few different type of programs. Hopefully it was somewhat entertaining. Thank you for checking it out.

I like it, for those of you who like options here is an option that Bruce G recommended to try before purchasing another Purge Valve. Give it a shot if it works awesome if not you can always order a replacement from Uzbasic Motorsports Performance Parts or your local parts story. Thank you Bruce G for the tip we appreciate involvement and recommendations from out readers about or videos. Please don't forget to subscribe as well. Again thank you all!!

Allen, thank you for the kind words my friend it is appreciated. Have a great evening.

Flash, don't get it...

Awesome, thank you for checking it out we appreciate it. Please subscribe and like. Thanks again.

Why won’t you say?

Chad, the Grid is a great piece of electronics and is the next step in technology. We are currently looking at installing the Grid system in our car. Thank you for the comment and please keep checking out our videos. We want to starting doing more random short live videos on UA-cam as well as Facebook....

Hey Panda, I hear what your saying...the factory Vega's where never blessed with a lot of pony's under the hood for sure. A lot of folks would change them out and put a SB Chevy 350 in them which really then gave them a lot of horsepower not to mention the car didn't weigh too much in the first place. Thank you for the comment and thank you for checking out the site.

Your right not to many. Pacific Raceway has about another set of bleachers on the opposite site that extends a roughly 1000'. Most of them where on the other side. Usually they don't open the side you see in the video except for large events.

Nick, thank you for the question. When you ask "How do you spin it?" Are you asking how the oil is pumped from the sump through the oil filter and back to the engine? Thank you in advance for clarification so I can answer you question correctly.

@@uzbasicmotorsports I see the arbor on the side that has a clockwise rotation arrow. I'm assuming people would use a drill to spin the primer pump. I put a remote oil filter cooler on my 6.4 powerstroke. It increased my oil capacity to 6.5 gallons. When I start the engine in the winter months, I get several seconds of no oil pressure. I'm thinking this would fix that problem. Push 10 degree 5/w40 into the engine while the glow plugs are warning up

@@RoboDriller I now understand what you are asking me. Thank you. You are correct with regards to utilizing a drill. I haven't seen one that is automatic but if you are willing to utilize a screw gun to pump up that oil into the engine this would help to get away from no lubrication while cracking. I only actual do that after the car has sat without the engine running for at least 24 hours.

Tony, thank you for the question. My question is what year, make and model? Is it EFI or normally aspirated? Just thinking you may possible have some sort of a leak in a line, carburetor running rich, harder to determine problem with EFI. If you are smelling raw gas in your car check for locations that are leaking out unburnt fuel at least to start the process.

@@uzbasicmotorsports my car is a 97 nissan maxima v6 3.0L

@@tonycervantes4816 If the sensor is dirty or failing it can send incorrect measurements. If the exhaust coming from the tailpipe smells like gasoline, the vehicle computer is sending too much gas into the fuel injectors and it is not burning it all off. A Fuel Pressure Regulators can go bad as well. It could cause gas leakage, rough running at idle and regular speeds, a strong gas smell inside of the vehicles, and it can be a potential safety hazard. Also be sure that your exhaust system is working properly and has no holes of loose nuts/bolts that could be causing additional smell in your vehicle.

@@uzbasicmotorsports which sensor u tell me that probably is dirty? Bro

@@tonycervantes4816 Best thing to do is take it into a shop and have them hook it up to a Diagnostic Machine which will pin point if you have an issue with any of the EFI sensors or injectors on vehicle.

Yeah, no that isn't right....you may want to try injector cleaner as a first step. Then look to see if the computer is functioning properly and last you may have to change out the injectors that are causing the possible issue. Best thing to do is take it to a shop and have them hook it up to a diagnostic computer to verify where you could be having this issue. Hopefully this helps a little. Thank you for your question.

I know...so do you know were I can find one....???

Mr. Anderson, for selling purposes only my comment was the Chassis is 7.50 certified...not that the car runs 7.50...You are correct it ran 9.40's and I had it setup to run Super Gas. What do you run? What class? Thanks you for your comment. Have an awesome day my friend.

@@uzbasicmotorsports Well I Would Suspect He Run His Mouth In The Jack Ass Class!!!! Lol!!! Keep Rocking!!!

Thank you for the thumbs up on the video, much appreciated. You mentioned that "you gotta go over that wiring setup". Please let me know if you want me to explain how I wired the system up?

@@uzbasicmotorsports yes, how wired up that whole section including fuse block

@@infamousnova We actually talked about putting a video together explain parts of the the wiring on the car in segments. Stay tuned for the video. We just need to schedule time to get it done. Thank you for your idea about the wiring it is a great idea for a upcoming How-To video.

So what is your question. Do you need any carbon emitting fossil race fuel? :)

Thank you for the comment it is much appreciated. Some thing a number of people overlook and wonder why they are losing performance. One thing I didn't mention is a tool to check spring pressure to verify if and when you will need to change them out. Next video. Again thank you from everyone at UMS to you folks at Shop Tour Hardcore Drag Racing!!!

The MSD Pro Power Coil is a great choice for short duration applications such as drag racing where the 8261 is built in-house by MSD as well as specific materials they us to create a durable coil with strong voltage capabilities, lightning quick rise time and lengthy spark duration. The 8261 can run spark for a much long duration of time.

If you have a MSD ignition system already you can us a Pro Coil. If not you can start with a MSD4224 as the ignition system to start with. What ignition box are you running now?

First slide the nut onto the plastic or metal tube female thread facing connection. Then install the ferrule over the tube with tapered small side towards connection. Then slide it on to the fitting body and tightened. Hopefully this help you. Thank you for the question we appreciate it. Again thanks and have a great day.

Pacific Raceway, Kent Washington...

If he had a motor half the size of the hood-scoop!!!

I was just thinking the same thing!!!!

Needs more cowbell. I'd bet its one scary ride though!

Install him a new dual ball bearing overdrive comma Dudley module on it and he could go on in the 4s😆😬

They are pretty cool rides and make a heck of a race car. I actually sold my Vega to a gentlemen in Tucson Arizona.

Whear is too young too luk the car 🚗

Thank you we appreciate the thumbs up....Thanks for the message and shout out!!

I know....awesome looking!! Believe it or not from the seat I had no issue. The competitors if they won the coin toss they always put me in the left lane thinking I couldn't see the light properly. Pretty funny because I always cut my best lights in the lane they thought I couldn't see anything. :):)