Відео

Hey everybody, so that front neon green ratchet strap should work fine if you’re already doing it this way (just don’t over tighten it). But I actually swapped it for a cam strap with hooks on the end after making this video. Thanks for watching!

Should have put him on the board for a measurement 😂😂

You should sell that kayak to Pete and get the new bonafide xtr 130, and make a build series, that is a new kayak dropping in September That is a crazy kayak and cheaper for most people

Just wondering, did you upgrade your 133x to another kayak?

What?! I have to use a 12' gig for frogs here in Flarda!😂

Can you make a video about what type and what pound line you and Pete use for all your combos

I know you already bought your new kayak, but what didn't you like about the Kakus?

Still use closed cell foam.

Manufacturer uses foam on the inside to stop flex. Do not use expandable foam lol. You can use large pool noodels to reinforced the hull.

Boone dox landing gear.

Great job sir thank you for sharing your tournament day with us you made done great catches today sir you did awesome

Thank you for sharing!!!!

Love you build. I have the same kayak and have been doing similar upgrades. I have a bow mount trolling motor deing delivered, with it being a bow mou t and the transducer being at the bow, is there any interference from the prop with imaging on your monitor?

I'm thinking about the New Garmin EchoMap UHD 10 inch, for my 12.5-X Titan, but don't know if the transducer will fit (it comes with the new #56 size transducer, which is longer...!). Haven't found any "specs." on the length needed to mount, so I haven't bought the Garmin yet...! Any help would be appreciated. Thanks guys, and you have a Nicely Set-Up 'Yak...!

The screws you use for installation are S/S Screws (stainless steel 10-24 Fillister Head Screws, available from Amazon, in different lengths!)..The are used in Multiple places on Native Watercraft 'Yaks...!

Hello, I dont want to bring up old memories ( Ascend 133X) but my question is what size plates did you purchase to replace the plates on the Ascend? Also i understand that they are seaflo and did they come with rubber gaskets? I am looking to fix some of the leakage issues as you mentioned. But i am going on your advice and get a Native Titan X. Thx again great builds you are doing Cliff

thanks again; I compared the one you used to the one I previously installed that didn't work and yours has different bulb design so i'm ordering it and trying again. the one i previously used prevented the titan oem seal from making contact and actually made the leak worse so i'm excited to try this one. The other thing i've considered is the possibility of replacing the bungee straps with something stronger that would pull the hatch down harder. THANKS!!!

Native now makes a scupper that fits under the hatch for this…check their site. Of course that’s usable only if you’re not using the Propel drive.

You should contact Native support and share that idea with them. Good Information.

The problem is that they using repro plastic in the good resin mix. In the mold process of the kayak . Resulting in this cracking do the impurity in the quality of the plastic Really sad to see this in such a comfortable kayak design. Thanks so much for your honest reviews and the time you spend doing content !! Keep it going Brother 🍀

Nice work, but you guys have to invest in a step bit. Game changer!

Awesome channel!!! Tons of ideas and tips!! Looking at buying a new (2022) 133x that has only been in water 1 time. What size inner tubes were you looking at for those trouble areas?

My only concern as you noted is trying to get that off if and when it eventually wears down is going to be really difficult.

Whats the top speed with your 45# thrust motor on the 133?

So I just got mine and set everything up, but apparently it is not firing. I also checked with the trigger and took of the safety and no fire. Any tips to help a brother out?

Thanks for sharing your day on the lake really nice video and done great bass catches! Yes sir I applaud you on making the right decision immediately to remove yourself from the water when first hearing the lightning! I can’t enjoy your videos if something serious would have happen to you guys! Tight lines take care and God bless.

Where u at this time?

Great video guys…question….my understanding is when running battery wire for extended distances you need to use 8-10 gauge wire. I realize that your distance is not that long but the YakPower wire seems to be under rated. Do you feel it is okay?

The installation is pretty clean. Has anyone installed them with the 1/2" hole opposite of how you did it? That would keep all that extra wire off the hatch lid?

So, instead of cutting the whole grip off, why not just cut off as much as needed to mount the loc and load? Sorry, I know it’s just a handle and I doubt a side would be used much but seemed a bit aggressive. One last thing, since you’re doing a lot of this stuff, I’d highly recommend a couple sizes of step bits. Nice job otherwise.

Maybe show the battery more next time?

How easy is this thing to paddle if you dont want to put a trolling motor on it?

Tree pounder

I just found your channel. That kayak looks great. I especially like that the surfaces are all mostly flat; that makes it much easier to mount accessories. Usually, most kayaks have several curves to deal with; that's always problematic. I may have missed it but how is the stability? Do you think the v-hull on this model is just as stable as a tri-hull design? Have you been in any rougher water... any two-foot waves with wind? I like the looks of this rig a lot. I've been looking for a few months and this one might be the one. Thank you for posting this. Subscribed.

I couldn’t wait for the berleypro as the sand in Florida was tearing up the bottom of my yak. So I ended up making my own out of kydex and glad I did because the berleypro doesn’t go back as far as I needed

Another good video guys. Question…do you have the link to the guard for the Titan X? If you go in Amazon, it lists the Titan 12 NOT the X. If you go on Burleys site, they list the X but the sku #’s are different than on Amazon. Want to make sure I get the correct one. BP410213 - Amazon Titan 12 BP410216 - Burley Titan 12.5 X

Thanks! The BP is going on mine.

Another good day out there! Good job! Thanks again for sharing your adventures!

A really nice day of fishing. You did a good job out there with some nice catches. Appreciate you sharing this!

thank you for the advice. i was recently looking at kayaks and found this video and your first. and i will say i wont be getting this kayak. having it crack like you said after two years of use is probably not a good thing

how do you change lighting on screen

Hola saludos! Mi nombre es Orlando por qué no lo vendieron o lo donaron a alguien que lo necesita o quiere tener uno medio tristeza por qué yo digo yo ahora mismo quiero uno por condición de mi hijo tengo mucho gasto y si tú lo vendes más barato yo a lo mejor lo pudiera comprar pero no sé el por qué del motivo de picarlo pero les deseo muchas bendiciones y muchos más suscriptores

Hey what size of cover did you end up getting for you titan 12.5? Thanks

is it possible to set the traditional + ClearVü screen to auto-start when turned on?

Great video! Thank you!

Great video guys!

I’m sold I’m off to bass pro shop I’m so serious ima get a kayak trailer and this is the one! I wanted a hobie but if I buy the 133x and upgrade it I will be under the price of the hobie I wanted