Відео

any changes after cleaning it?

Thank you... Found exactly the same problem... Now fixed 👐💯👍👍

I wonder why they can't use a brushless motor for the fuel pump? It would stop all the black carbon dust circulating. I suppose cars get away with it because the tank capacity is so much bigger. Does the carbon dust actually affect the flow rate, or are we just replacing filters before they are blocked, just because they look disgusting? Its an expensive quandry😮😂

2 years hows the arashi discs?

Wow great video! I didn't think nobody else would have this problem but i guess im wrong but thanks for sending me in the right direction brother!

Thank you for the video! I'm getting ready to dive into mine as it has started cutting out intermittently. Hopefully just needs a clean, but i may also replace rhe items you recommend. I'll let you know how i go 🤘

So did this fix your always on PSP? i have same issue and a replacment is hard to get or super expensive... Never mind i read all the replys. seems in Australia cant get the ones you have on the video (FYI its very hard to read on a laptop and the colour you picked) but i can get the IRF3205 110A/55V ones. so will give that a try. beingg its 1 year on from video post, has there been any issues with not using the exact same diode?

Sit me selfde probleem. as ek aan harnas peter dan gaan spark weg en kom terug. al daai terminations is soldeer en harnass is gestrip. vermoed draad is af in isolasie? multimeter toets als so ver reg en meganies voel draade ook reg. motor is oorgedoen heeltemal en nuwe crank case pressure sensor, nuwe reeds ook. voel ek kan die ding brand steek maar wil eers die vout kry want dit pla my. ds al 6 maande... enige ander idees? hoe verskil die 2022 se harnass? is harnass issue uitgesort en sal ekhom kan re-pin tot op die 2018?

hello, you wantedto know if you would like to send me the numbering of diode codes (the small parts) that l publish in the video, l can no longer find them ,they ere the ones that appear in a circle

holl

Thanks You Mister le pido por favor dar una cátedra de como. Debe llegar y cuando debe llegar las corrientes de voltaje el mio la tierra que llega al cable mas delgado que hay ala hora que enchufo se desaparece en si lldebe llegar un negativo o un pulso negativo como al negativo de inyectores ?

i wonder how far off that dyno is....lol probably read 250hp...lol

Nur cool

Just ride it 200mph

They are like music to my ears

I need to do this to my 05' Klr650 👍

I can't bet my life with Chinese rotor

Hi, thanks for the video! My mini cooper s r53 pump would not shutdown even if i turn off ignition and remove key. It only stops when battery is removed! Any suggestions on what could be wrong? Also what fluid are u using to clean up, and what soldier should I use to re-attach?!

Exact problem. There was zero power to ignition, fuel pump etc. One small wire was broken. Fixed! Thank you.

Nice! And ground directly to the battery?

Weed is Genesis 9:3

I drowned my 18’ ktm 250 tpi, completely under water (fell off a bridge) Tipped the bike and got the water out the pipe, and then took the spark plug out and drained all water in top end, put a new plug in and the bike started and went for another 8kms before bogging and dying on a steep tech uphill. The bike still has all the compression. It doesn’t want to start, eventually when it does it idles for a few seconds before bogging out again. Could it be this? Or is it more major- injectors, stator etc. that got wet? It’s going in to be fixed, but just wandering what could have possibly happened.

What is the diode number?

That busa can't stand a chance 😂😂..can you say,gap sauce😂😂

Nice video! Where can I get the replacement kit?

How did you determine this was the problem? I'm having the same problem but very intermittently I'm also getting a check engine light and fuel light.

Hi! Good video, i have a question, my pump got water inside and now it doesn't turn on, could it be due to a condenser?

Complimenti bellissimo video, per noi che possediamo una mini cooper r53 e di grande aiuto per la riparazione fai da te. Grazie Roberto

@KillShot ZX14R Thanks for the great video..! My pump is running with ignition on, car not started... Do you think maybe the same transistors causing the issue?

How are they now brother?

Ok, so what were numbers ??

Any idea if that cleaning will help for pump to be quieter ? Mine is loud at all times but work as intended. Well sometimes when worm it steering is bit harder but my main concern is noise

Mine has the same problem, still on. Did you change the transistor or just clean all electric parts? And if you just clean it it works after? Thanks.

Bad verry bad

Before I read the comments I was going to roast you . Those two brothers exhaust are hp killers Yada Yada Yada but I saw where you just got the bike. I hope you put a Brocks alien head on that thing.

Having this exact issue, green gunk and drops of water from the moment I cut it open.. piss poor from KTM/Husqvarna to design like this! Thanks for the info 👍

omg...lol that was great!

With brocks,headers, its over 220hp

0 chance the dyno is dialed in correctly. plus running with 2 brothers slip on exhaust assures that the bike is not getting the hp it could have.

Hey how can I contact u. Have a question.

Thank you for sharing. Much appreciated from Albuquerque NM USA.

Nice video! My bmw has the same style bundle of the end of the wires connected with one crimp connection. That was in the interior of the car behind the dashboard and it still wasn’t that strong anymore after moving it and disturbing it when i did some wiring to the car. So basically i did the same thing as you to fix the issue. How this is considered waterproof outdoors on a dirt bike or motorcycle is beyond me.. Just cheaper and easier to assemble a wiring harness like that and then on top of that not use heat shrink style waterproof connrctions and either good ones or just have a machine solder them all together like the OP explained. Its not that hard to do at the factory..

Hey mate, my bike bogged and just stopped. I still have fuel & spark.. Do you think it could be the case? Before I start hacking my wiring.

What gear were you in for the pull?

Those Austrians are pretty fine engineers, but they have always been horrible with the wiring.

What mods does the 12 have? std?

So stupid video. Is pointless, if u don't show hou to plug the switch

Great video mate. Easy to follow. Thanks.

What a waste 😪

What has been done to that Kwack? Makes my 25 year old ZZR look like a snail!