Відео

I haven’t done much tweaking since initial setup, so can’t comment on connectivity reliability. Far as I can tell, the programming has stuck where I initially set it, even through random power outages and brown outs. Haven’t noticed any time slippage. I should reiterate that the ReeFi Uno is hung over a down stairs frag system that is only really observed a few times a week, so it is possible there could be some of the issues mentioned. Mostly happy with the light, other than the loose Oled display that always seems to be ever so slightly out of alignment. Have you taken up any of your issues with the manufacturer?

Really appreciate it! Thanks for checking out the video

Thank you! Let me know when you are ready. I should have some sps available to purchase

Always appreciate the support. Hope your systems are all doing great!

Nice. I’m sure I’ve purchased a coral or two of yours then.

Thank you! Cheers!

R2R link is in the description

The RODI is on a solenoid valve and pressure pump connected to a timer. Additionally there is a timer for a RO purge valve that triggers on 2 minutes before and after.

@@craftaquatic6472 Thanks!

At this time in 2024, I dial in very little of the white channel on any of the lights over this frag system. 5% max. I do not really need supplemental white visually and the blues reduce algae growth. Thank you for subscribing.

I think the height of the stand makes everything look taller. That’s how I felt. Tank is definitely 8’x2’x2’

@@craftaquatic6472 Interesting... Any idea how tall the stand is...?

38”

Temp 76.8-78 PH 8-8.4 SG 1.026 NO3 15-25 Ca 420-450 Alk 8.5-9 Mg 1500 PO4 .05-.09

Agree. It really goes to show, there are so many different ways to reef. I personally prefer the simple is best approach. much like John. Thank you for checking out the video.

Agreed. It’s a gorgeous tank with some of the healthiest goni’s I have seen

Welcome aboard!

Water level in sump is 8” water in skimmer body is hard to judge.. there is so much foam. I’d say a little over 3/4. I have to say, the Lifereef is either pulling or doing nothing, which is why I now have it on a 12 hour timer

Totally agree. Living art has been my philosophy for as long as I can remember, so we absolutely have that in common. Thank you for taking the time to check out the video and leave a comment

Nitrate is 15-25 Phosphate .05-.09 I believe he credits the polyp extension to gentle intermittent flow of the gyres. Definitely check out his write up for more info. Thanks for checking it out

It is literally living art, that’s how I‘ve always viewed coral reef aquariums, as a science and an art. He is spot on.

One affordable option is the Xantrex PROwatt sw 15A Transfer Relay 808-0915 It is 15 amp $70 but have no experience with it myself

appreciate it, thanks for the help and for sharing all your information and videos. @@craftaquatic6472

I really appreciate it. Thank you for taking the time to share your positive thoughts. TBT these reefing tip videos are my favorite to make, but they seem to generally get less views. I’ll be making another soon though. I believe you are referring to the seasons greetings montipora? It’s a green coral, but the only other encrusting on that overflow is the gsp

@@craftaquatic6472thats it! Thanks for the reply.

Happy to hear that it was useful

Thanks for watching! Many people seem to have had positive results acclimating Mollies to salt. Especially at lower brackish levels, where they seem to thrive and color up the best. In a SW setup they are short lived compared to other marine fish, but seem to do well, especially in lower flow systems.

Hey thanks! This was the very first video I made for this channel. FFM is coming up again soon in March. Hope to see you there.

Yikes! I hope you were able to save the tank.

Yes it did not effect the tank inhabitants ironically.@@craftaquatic6472

Not sure. I haven’t heard anything for awhile. You can always keep an eye on the Manhattan Reefs website for upcoming shows: I will report back if I hear of anything

Located in the Hudson Valley, New York. No website, but you can contact me directly at contactcraftaquatic@gmail.com

Thank you! I might include that info as part of a future video. Pretty basic. Plug into your DC input on the apex to a circuit in your home that will cut during a power outage. The apex will now be able to sense a power outage, even while plugged in to your battery generator. From there it is a simple matter of setting up “if .. then,” commands. most of that is covered in Apex videos already. Hope that helps

Great, if that is what works for you. My personal experience was that they worked well at 8” on the 120 and just as well at 12” on the farm system. Really depends on the details.. kind of coral you keep, amount of flow, nutrients, clarity of the water, your output settings.. and many more

@@craftaquatic6472 there’s a couple of guys that sell higher end leds. They do a video with a meter. Measuring PAR. To get the most usable light with these cheap 100-200 lights based on the par readings, the key was the height. Basically 14-18 inches for most was satisfactory, but up to 24 there was still improvement in the PAR readings at all locations

I’m just basing it off PAR measurements

ua-cam.com/users/liveUVLNCispGrM?si=1DnoIPuEj33VDQNH

I’ve set the Apex to prioritize specific functions during a power outage. In tank circulation switches over to the generators DC outputs. Return pump is AC, which remains on. All lights and dosing pumps pause to conserve power. Heat switches to low temp set at 76, in sump 200 watt heater. Rarely comes on, unless very cold outside and home temp drops significantly. I’ll be installing a 200MAh battery very soon, for increased run time. Cabinet will facilitate 3 - 100 AH or up to 1 300 AH

The scrubber was installed for two years and worked as expected, producing some hair algae and bacteria on the fine mesh which I wiped off weekly with a paper towel. The system was nutrient depleted so I removed it.

Just Google Cree or Chanzon 3W Red LED chip. Pick what works best for you

Thank you! I’d have to think about it, but that is a possibility maybe spring early summer. Much of my shop is outside. Wouldn’t be cheap, but it is pretty nice to have a purpose built power cab.

Appreciate it!

PAR at bottom ranges from 100-200 middle is 350 Top 400-550 according to MQ-510

So far, the build has been very reliable and has carried the system through one lengthy power out. About 28 hours. I do feed this inverter with a GFCI circuit, with no issues. I can’t find the info you are referring to. Care to share a link?

It was in the Amazon reviews for the inverter itself. Three different reviews mentioned tripping via gfci

Got it. Fortunately, no issues with my build, so far. My inverter is plugged into a circuit using a 20 amp gfci. I switch the breaker off and on, to test the entire system at least once a month. It’s hard to say what the issue is, without closely inspecting others builds. Hoping it is not a QC issue. The inverter is built like a tank.

She has brought a whole lot of personality to the mixed reef. We feed her by hand

@@craftaquatic6472 cool

Thank you. Really appreciate it! Have a few video ideas I am excited about, for the coming year, so more to come.

Thank you for always checking in and supporting the channel. Happy Holidays!

Thanks! It’s one of those hobbies where knowing is not necessarily “half the battle” maybe like 18% of it. I’ve been reefing for over 20 years and still learn new things weekly. Pretty cool getting this mixed reef to 5 years though. Thanks for checking out the vid!

Thanks!