Old/cold pvc. Mine cuts any pvc up to 2” Sch40 to Sch80 all day. Even though it’s only rated to Sch40. Anytime pvc is cold or old. You need to skip this tool. An fall back to the Sawzall/Hackzall instead because they will crack an shatter. Both of them tools and pvc is what gives me a roof. I have cut other crap with it. It wasn’t made for. But also have bent the blade doing so. Soon as ya bend the blade. It’s a wrap. An needs replacing. But in normal temps. With not old an or sun beat pipe. It works like a champ.
Thankfully - Milwaukee just announced they are releasing pruning shears, to compliment their small hatchet m12 and now m18 chainsaws. I actually have their m12 hatchet chainsaw and its pretty impressive, so i can only imagine the m18 is even better. Woulda been nice if they released both at the same time, since i would have gotten the m18 instead. I’m sure they their sales dept does that on purpose, knowing many people would upgrade and wind up buying both instead of just one. I have the PVC shear at work but havent used it much. Also have their original m18 chainsaw (they just announced a smaller top handle version too) and their m18 pole saw (among many other Milwaukee tools). Honestly they are all very impressive.
Nice first draft. I've just built my first recumbent 2 wheeler, got it riding well enough I know what to change in the plans for the next one I'll make real soon. I read that if you're looking from side on, the axles should be behind the kingpins. They didn't say what difference not doing that would make though. How did you go with the kingpin and wheel camber angles to eliminate bump steer?
really really nice job. i wish i had such skills. a trike is actually a very complex machine. did you work out the proper steering geometry etc. are you fitting front brakes as most of braking is done at the front. imo, you dont need suspension on a trike. most ppl run high pressures on their trikes thinking it makes them faster, forgetting on trikes the weight is shared by 3 wheels! i have a catrike 700 and its pretty comfy on under 60 psi front and rear and probably faster as its just floating over the road rather than jiggling about. and with bigger tires susp is even less important. not only will you shed a shit ton of weight / complexity you can lower the seat angle back alot more. you want to be as reclined as possible as thats what enables you to go the fastest and have the most fun. the greenspeed aero has a 20 degree seat angle and is the fastest trike. i dont get why ppl want high seat angles not that yours is particularly high. i mean what else is a recumbent for but to go as fast as possible lol. weight isnt the primary concern as long as you can get it reasonable. thats what id do if i built one anyway ie just shamelessly copy the gs aero :)
get breathable and cleanable material as the seat will smell from sweat after awhile. great job. though,,I too am working on something like this .but one enclosed for year round use.
You may try skateboard as backrest and a one-inch yoga mat as your cushion. There is an adhesive spray made by 3m and have yoga mat cut to size to whatever you prefer. One good example of seat designed by Russian Vsevolod Kotelnikob of Rinzler recumbent bike check youtube.
very good!🥰🥰😆😁😁💯💯💯
Old/cold pvc. Mine cuts any pvc up to 2” Sch40 to Sch80 all day. Even though it’s only rated to Sch40. Anytime pvc is cold or old. You need to skip this tool. An fall back to the Sawzall/Hackzall instead because they will crack an shatter. Both of them tools and pvc is what gives me a roof. I have cut other crap with it. It wasn’t made for. But also have bent the blade doing so. Soon as ya bend the blade. It’s a wrap. An needs replacing. But in normal temps. With not old an or sun beat pipe. It works like a champ.
Hey what happened to that pos recumbent?
Nice job 👍
So nice And amazing recumbent trike... I have too bro.
I like 👍🙏
That's good but would 2 motors work on same battery?
Thanks for the video.
Lol u were barely hitting 4mph
посмотрел 2 раза. 🚲👍
I’m back on the crack head algorithm 😂
Show up with a gun and they won't be coming back.
What happens if you run it on only one 12v battery?
Good job
Frozen pipe 🤦
Put the lower chain on top of the idler. Then it won't fall off.
How many cm the distance betwen the righ and the left tube ?
Thankfully - Milwaukee just announced they are releasing pruning shears, to compliment their small hatchet m12 and now m18 chainsaws. I actually have their m12 hatchet chainsaw and its pretty impressive, so i can only imagine the m18 is even better. Woulda been nice if they released both at the same time, since i would have gotten the m18 instead. I’m sure they their sales dept does that on purpose, knowing many people would upgrade and wind up buying both instead of just one. I have the PVC shear at work but havent used it much. Also have their original m18 chainsaw (they just announced a smaller top handle version too) and their m18 pole saw (among many other Milwaukee tools). Honestly they are all very impressive.
Go to goodwill look for a computer chair heating pad seat Take out wires. Instant seat<
Very nice
Very impressive
Old cpvc will always crack like that. And the cold doesn't help. I like how you cut wood with the tool
That is a great design and I intend to replicate it. Theres just one thing I want know is where did you get the front wheel axles fom.
Greetings from Colombia. What axles did you use for the front hubs? Thank you
Learn how to use a tool.
Hi Hien Nguyen. Exciting content. Good to use it?🙂
Hi Hien Nguyen. Exciting content. Good to use it?🙂
schedule 80 pipe is notorious for that no matter what you used to cut it. try putting some primer on it first to soften the pvc plastic
Nice, I might try making one myself.
Its thin pipe use schedule 40
why all almost all those recumbent bike have transmission to the rear with a 6 meters chain ? Why not the front wheel instead ?
Screw y'all haters!! This thing is awesome!!🔥🔥🔥🔥🔥
WOW⚡⚡⚡⚡👌👌👌👌👌👏👏👏👏⭐⭐⭐⭐
Nice first draft. I've just built my first recumbent 2 wheeler, got it riding well enough I know what to change in the plans for the next one I'll make real soon. I read that if you're looking from side on, the axles should be behind the kingpins. They didn't say what difference not doing that would make though. How did you go with the kingpin and wheel camber angles to eliminate bump steer?
a bicycle with three wheels is: A TRICYCLE
I'd like to buy for 100 bucks from you if you would sell it
Seems to me the trick thing to do is to adapt go kart spindles and hubs.
It is a good beginning. Next level is to provide power assist or more gears for the hill climbing. LOL
Nice effort mate , and i like your ingenuity ;) .
It looks heavy.
Show show top!
Вась, цена этого инструмента??
1/2" thin wall with any cutter in cold weather, old pipes, would do the same if you don’t rotate the blade while cutting.
No in the cold you switch to a sawzall and not have issues
Pavom paiya arva kolarula munu wheel la matti mithika mudiyama kastapaduraru
really really nice job. i wish i had such skills. a trike is actually a very complex machine. did you work out the proper steering geometry etc. are you fitting front brakes as most of braking is done at the front. imo, you dont need suspension on a trike. most ppl run high pressures on their trikes thinking it makes them faster, forgetting on trikes the weight is shared by 3 wheels! i have a catrike 700 and its pretty comfy on under 60 psi front and rear and probably faster as its just floating over the road rather than jiggling about. and with bigger tires susp is even less important. not only will you shed a shit ton of weight / complexity you can lower the seat angle back alot more. you want to be as reclined as possible as thats what enables you to go the fastest and have the most fun. the greenspeed aero has a 20 degree seat angle and is the fastest trike. i dont get why ppl want high seat angles not that yours is particularly high. i mean what else is a recumbent for but to go as fast as possible lol. weight isnt the primary concern as long as you can get it reasonable. thats what id do if i built one anyway ie just shamelessly copy the gs aero :)
Most likely too cold outside for the PVC I have one it works awesome on PVC but just not in the cold
No brakes upfront?
get breathable and cleanable material as the seat will smell from sweat after awhile. great job. though,,I too am working on something like this .but one enclosed for year round use.
God having created little boys went on the create mud puddles...I like this machine
You may try skateboard as backrest and a one-inch yoga mat as your cushion. There is an adhesive spray made by 3m and have yoga mat cut to size to whatever you prefer. One good example of seat designed by Russian Vsevolod Kotelnikob of Rinzler recumbent bike check youtube.