Відео

Thanks for the rhyme

They can, my goal was just to not make it easy, they can cut the straps but they wont get the roto packs off the mounts without some work

Teraflex makes replacement rubber isolators for the jeep www.northridge4x4.com/part/4953000-teraflex-hd-coil-spring-perch-kit-front-lower as an example, hope that helps

Absolutely!

It has not, it has held up really well, the only things that have a little rust on them are the bolts that hold the pads that stop it from opening too far. Really happy with it!

@ looks nice! What lift do you have?

@Madmike908 thanks I have a an AEV dual sport lift with the 3 inch overland springs and falcon shocks with metal cloak control arms and geometry correction brackets

You bet, Thanks for checking out the video!

Well it works

@ maybe for repeater locally but try something 20 miles away.

@BobLay-t9i we were only using it for vehicle to vehicle coms, at the most a mile or two, everyone has a different use case for anything they use, this was ours

It will not void the warranty, just keep a log and receipts of the oil and filter and record it in your owners manual in the service section

@ it’s not a factory warranty it’s one purchased from car lot.

@dunnoyolo2238 ah, i guess they have it written in that you have to get the oil changed at their facility to keep the warranty good?

@ has to be certified licensed repair shop . Which kinda sucks because I can do a lot of it myself.

@dunnoyolo2238 interesting and i am sure its frustrating because paying a shop to do it is not a cost effective way of getting your oil changed by any means

Yes that would certainly make a difference!

Thanks, I am a fan of the process and of course the end result! Good luck with yours

Beautiful part of the state!

For sure!👍

@kristamurphy5444 😁

Thank you!

Thanks

Thanks, I appreciate it, tent is solid even in the wind, been really impressed with the uv resistance has not faded at all, been one of the best tents i have used

I think you will be too wide, i just barely fit with 35s and the tires were touching the trailer sides as it was, i even aired the tires up to max cold pressure to make them skinnier, good luck

Myrtle Beach is closed!

Awesome, how is your clutch pedal, mine seems really short throw that is, i just ordered a clutch master and slave as i think they are bad, doesnt slip just short engagement

It is 3/4 inch, thanks for the question

@@FischerJeepAdventures than you

@@FischerJeepAdventures than you

@Dubinsky4x4 absolutely

Absolutely

Thanks It really transforms the truck. I am really happy with it, this is on a first gen tacoma each panel is 34.5 inches and they come up almost 28 inches off the bed rail when open, so lots of room to get things in and out, hope that answers your question

Thank you, thats exactly what i needed

@logicha1267 awesome

Its good, the cover has held up perfectly to the seasons and uv and the tent is great, I am about to switch it over to my new to me first gen tacoma project so ill be excited to see how i like it where i dont have to climb so far up, super impressed with it

Thanks, for question one i had a combination of a long handled fine toothed ratchet that allows little swing to use the ratchet and a universal joint extension. For question 2 I hand threaded the individual bolts into the foot of the winch to avoid cross threading then tightened with a socket and torqued with a torque wrench. Hope that helps.

@@FischerJeepAdventures It definitely helps; thank you!

Absolutely

I have learned to not include music its too much trouble and never seems to work out right

Thanks! It worked out really well for me!

Hello, You dont need them for the lift especially if you add the geometry correction brackets, i added them for the greater articulation of the joints on the control arms, just allows the suspension to flex in a way to help maintain traction.

@@FischerJeepAdventures thanks bud

👍

Its the one by vector offroad

Yes they still work and are great lights you will be happy with them!

Honestly when i first started making videos it seemed like that was what i was supposed to do, I dont anymore unless its covering a time lapse section where there is no natural audio

Thanks for the hint, I would have never known what they were

I got this one from amazon amzn.to/3TiYScn

What is that supposed to mean? You think through a video you can tell the difference by what you think the motor is supposed to sound like, come on man, if u dont have a productive comment keep it to yourself

Sorry, didn’t mean to be unproductive. My thought was that loaded down rigs, and the area that was a little off camber…. Some people forget to switch to 4low for better control. It sounded like the motor was struggling a little and then created a lot of wheel spin. Your video and information was great. I’ve been through that area as well.

@erickweinzapfel196 water crossings and sand I often switch into manual shift and start in 2nd gear in 4low, with the rubicon transfercase ratio 1st gear can be really low, so it will have lower rpms than if i start in 1st and it gives a little more wheel spin which i feel is important on slippery rocks

The tent comes with t bolts that slide in the tent rails 8 total so one on each side of the rack cross bars per rail and then they are fastened on the bottom with metal straps that have a bolt hole on either end that basically makes a u when you bolt everything together, super secure

I sleep on my side curled up, been sleeping that way my whole life so its natural for me to do it

Thanks!! Looks like you guys had quite the adventure! Thanks for sharing

Thats how i used it, i set the basic control arm length first and then used the strap instead of wrestling with the alignment and then fine tuned from there worked out really well

Thanks for the comment

Not sure what you mean, its pretty straight forward, and haven’t had any struggles

The whole world seems to be charging more for everything these days, very frustrating

You bet!

Right, why would they not protect the most important things straight from the factory. Good luck and enjoy the jeep!

Absolutely thanks for watching!

Thanks I appreciate it, I did take it for a drive after and it made a partial difference, definitely less vibration, as to the one piece drive shafts I did look at those but it appears atleast for the first gens tom woods stopped making them because it did not solve the vibration issues particularly caused by flange angles due to suspension lifts, it seems like there are no great solutions

Thank you and thanks for checking out the video

Awesome!!! And your welcome

I think thats a great option and one we are looking at too

What is the name of the aftermarket engine skid plate which you speak of?

They are holding up very well, no chalk or faded areas, even the edges have held up, very happy with them, I think you would be too

It is mounted to the rack using awning brackets mounted to the hd crossbars

Correct, the frame of the tent is not designed for accessories, if your wanting to have them or racks you need the full aluminum cased hardshell

Excellent, thanks for the comment!