Відео

Been using my 600 for about a week now. They must have made changes since you had yours. As you know they listen to the customer and must have figured things out with an update. I don’t have any of your issues.

Try using just dawn dish soap. Original only. Does well. Will check out persil, thanks for this.

I appreciate the walk through, but I agree with other comments... too much and too long for what you cover. I played the video at 1.5 speed and it was still too long. all meant to be good criticism, keep up the videos! I do appreciate you showing the motorized feature.

Hi! I played your video because it said unboxing and initial setup which is where I had questions. Do you have an actual video with the initial setup? The instructions are clearly badly translated and they’re confusing. We got this for drinking so, our use differ from yours.

I got my BT 600 pro today..Tmps light on 2018 Promaster..the whole process took less then a minute. I hit LR tire walking back to steering wheel the tpms light was out..told me the left side wasn't recognized sensor in propery position..and corrected the issue.. I spent a grand recieve 5 year updates..30 sensor and the Tool was at no charge..came with a hanging wall charging system..I can view the vehicle I'm working on my puter..I been turning wrenches 30 years. This 600 hitting the right buttons is impressive..imo

Was about to pick up a 600 but this review is making me think twice. I’ve used a few other Bartec’s and when they added more programmable sensors to their tools the scan process slowed down. ATEQ is a lot quicker. However, Bartec had less issues during resets. Quick tip when using any scan tool. After uploading the ID’s to the ECU don’t turn the key off and rescan each sensor again. That most times will turn the light off and there will be no need to go for a drive. That is on the Tech tips from Bartec. When doing a flat repair or changing tires on a vehicle with a tire light on and the sensors are already programmed to the vehicle in most cases just turning the key on and rescanning the sensors will turn the light off. For the Chevys and Ford that have the horn chirp methods take a look at Bartec VT5S.

Not only good for water ;)

Got some for my Corso and mutt. They love it too!

Be warned the A-Tech tool is good very good at first but the problem is they're downloads contain bugs I'm not sure why but every time we updated one of the tools it took longer and longer to read the sensors initially the A-Tech tool would read very fast like maybe 2 3 seconds it would read the sensor but then after that it would fail after we did the update it would take forever to read sensor like maybe 20 to 30 seconds like you're talking about with that tool there

Yep after watching your video man step back to bartech Pro 400 I'm telling you can probably get one for like $150 only issue it does not have Wi-Fi update but you can plug it into any computer and download their bartech platform and then update it but what you're describing sounds like the dongles a piece of trash but I've never really used dongles anyhow because like you said it's quicker just to activate the system and do what you do not a thing you're talking about having to go around a second time to scan the sensors to get the light to go off that's a Toyota Toyota or Lexus deal and sometimes when it's flashing and it won't go off even after doing everything it's because it's in a lockout mode which means that you have to get a tool to bypass that usually it's an OBD tool that goes into the connector under the dash and then basically jumps the wires to reset it but yeah Toyotas and Lexus IS yeah that's an issue with and the other thing is with Jeep Wranglers or any type of Jeep usually wait to ask you about the spare but that's minor compared to what what other issues are describing

Tell you what man if you hate that tool go and get a bar Tech Pro 400 I'm telling you you can still update it and you can use it with 2024.25 cars trust me that tool is amazing

I meant it is not archaic

The user interface is an archaic either is simplified so that you don't have to hunt things down very simple tool to use probably one of the easiest out there

Sounds like user error to me buddy is to be honest bartek probably makes some of the best tire pressure monitoring tools in the business and this is coming from someone who's worked in a tire shop exclusively we've had all kinds of different tools by bartex always seem to work no matter what sounds to me like you probably clicked on a bad website because the website you will download the updates from does not look like what you describe at all just give you a heads up if that's true then log on to somebody else's computer and use it to download because you'll have to download a inner user interface from bartek first register the tool and then go from there I know bartek is spelled wrong because I'm using voice to text so just let you know man I think you got a bad tool man to be honest with you cuz we had the 400 Pro and it was awesome and it's an older tool but I still am able to but I am still able to update it

Thanks for this video. I am plumbing in a laundry for a future heat pump dryer. This video is all I could find after hours of searching how to get a laundry future ready. Cheers

They make my screen look dull after awhile. I have the 24 ultra

Way too much

I don't go a day without my streamlight . I prefer the AAAx2 stylus pro .

Buy the micro stream clip and clip it to stylus pro . There the same clip plus use heat shrink tubing to hold the clip and on and a bite . I have carried my for since 2015 . I was a machinist and had one in my shirt pocket still do as medical equipment repairman.

If you don’t like chemicals just think what that deodorant is doing to your body look what it does to your cloths.

Have an S24 : no screen protector and no scratches, looks new. I'm just careful how i treat it.

What type of plug does it use

I wish I could still be connected to the internet so I could use while live on TikTok

I can grow your youtube channel ....

Thanks man, that wasn’t in the printed instructions that came with my dryer.

I recently viewed your UA-cam videos and was impressed by the high quality of your content. However, I noticed that they are not optimized for SEO, which may be affecting your views and subscribers. I can help you identify and fix these issues to reach your audience more effectively. Let's work together to take your channel to the next level!

How do you get it to work with Android? I tried and it won't pop up when I got to the casting part.

I had a Samsung front loader and I loved it. It broke and now I have a washer that makes your laundry get wrapped into a ball. I took such good care of my Samsung too. Appreciate the advice on the German Persil.

You can hold the pipe to your bench with a clamp while cutting with the jigsaw

fun fact.... you can use the camera app on your Apple Watch to mirror the display. I have use that a few times but I have ordered this monitor which is coming Tuesday. Hi much rather use that than my watch when it comes to vlogging on my channel

*NO NEED to say “what’s going on everybody.”* Sounds goofy.

If you don't mind, what length arm did you need?

Can you confirm that once the hose was hooked up as you showed that it actually drains? Midcycle my dryer gave me a qatming to empty the water tank. So checked it and the tube and bother were dry. But when i reconnect the water tank tube it immediately filled up.

Great to know that it worls with samsung phones.

My Walmart automotive department uses this

You should read the manual as the tech 600pro has WiFi and updates via WiFi. I use it everyday. I would question the accuracy of this tool review.

Do you tumble dry after? And if you do what settings do you use on the dryer? I have a boyfreind who is a grease monkey for his job, aka a lube tech😂

🎉🎉🎉

great😮

*PromoSM*

Your a fan of Drew Estate too. Im Sold!

My stream light broke the day I bought it

Thinking about the Bartec Tech 600 Pro reminded me of the Tech 400SD my workplace has. When I tried to program blank QWIK-Sensors with the 400SD, the tool wouldn't let me program them because they were no longer supported. And the coverage was very limited. I had no choice but to buy an ATEQ VT37 to get extensive sensor coverage. I forgive the VT37's lack of OBD relearns since that can easily be done with the Autel TS508 the shop is currently using.

Nice, u put the blank in the vice and broke it with a hammer so if you took broken part A and broken part B put them in the same mold then the middle would be filled in with epoxy nice video

Many thanks, this is so helpful.

do both dryers use the same wall plug ?

Great idea on the carpet. Also, suggest polishing while they are still on the mandrel.

Great way to recycle shavings

Interesting outcome that looks great

Came out very nice. Thank you for sharing your awesome mixed media pen blank. Everyone stay, warm, happy and healthy. From Henrico County Virginia