Відео

@@Quang-pham since our oil filter is positioned almost upside down, adding oil to it is not applicable as it will spill.

@ ok tks you

@@marklesterdoria1904 no po. Baka hindi nakalapat nang mabuti yun fuel pump sa assembly, or yun buong assembly hindi nakalapat nang maayos sa tank, kaya nagvivibrate. Inspect nyo po uli.

@@tripnaminph yung tunog po nya di po dahil sa vibration mula sa loob. Tunog po na parang lakas ng pressure pero parang mabula yung supply. sabe po saken nung nagkabit normal daw po kase bagong palit filters. normal po kaya na ganon nga parang mahangin/mabula tunog?

@@patrickmiller4877 what do you mean? can you elaborate?

Ok naman sir, walang pinag iba sa orig.

1000

Thanks 👍

Every 3 years or 60,000km whichever comes first

Lazada or Shopee sir madami, pati yung tool for removing the L-ring. Yes bundle sya ng fuel flange, included ang o-rings and clips. Not included yung reservoir cup.

​@@tripnaminphnice thanks overdue na ang filter ko

Hello, thank you for appreciating my video! As for your quest to search for 2000 Mirage parts, know that it has many names, the most popular of which is the Lancer. I think you can find many parts online because based on you car model, the engine name should be 4G15 which is quite popular and been used on other car models as well. The 1.8L is 4G93 which is very different from 4G15 so I doubt if parts are cross-compatible. That said, I suggest you should refer by the engine name when looking for parts. If you could take out the part and bring it to your local shop, they should be able to provide an exact replacement. Good luck and Godbless!

@@tripnaminph Thank you very much!

Take the Skyway then Skyway Stage 3, then go straight to NLEX Balintawak toll plaza, then exit to Mindanao Smart connect going to Novaliches. At the intersection of Mindanao Ave and Quirino Ave, take the tunnel. Then take the first u-turn after the tunnel. Then stay at the right lane going to Quirino Ave. Turn right to Quirino Ave then you'll reach SM Nova.

I'm just an amateur 😅 but thank you!

CN ROM bro

Starting At NLEX To NLEX CONNECTOR To Magsaysay Boulevard

Hi sir sorry for the late reply. Hindi po need ng special tool. Need nyo lang ng spark plug socket - hindi po yan special, common yan, even sa mga motor laging may kasamang ganyan. Sa kotse nga lang walang kasama. Madami po sa Lazada or Shopee, I recommend bili kayo ng magnetic para mahahatak yung spark plug. Bili na din kayo ng set (other socket sizes at ratchet) kung meron. Torque Wrench and/or breaker bar ay optional.

I totally agree, but in my case I did it on purpose - the washer is stuck to the plug. I figure if I forcefully remove the washer, I could put a dent on the plug, which could increase the chance of leakage. So until I find a cheaper plug (unreasonably expensive at the dealership), I'll retain the washer. There's been no leaks for 8 years so I think I'm good.

I've had mine for 8 years now (2015 model) and have never changed the crush washer. Snug the drain bolt and you'll be fine. No need to get crazy with it.

I actually got the idea from the time when I was a McDonald's crew - we transfer the grease from the grease trap into doubled garbage bags. But usually when I am changing oil at my mom's house where we have a bigger garage, I use my dedicated catch basin.

@@tripnaminph Yeah, I hear that. I actually used to work at a DQ. I keep the container the new fryer oil comes in, for used engine oil. Awesome sauce

Stabilizer bar reduces body roll during cornering. That is because the body of most unibody cars is not very rigid - the part that holds the wheels through the struts (coil spring + shock absorber) flexes during cornering. The upper stabilizer bar in particular will absorb the energy from one wheel and transfer it to the other wheel to counter the undesired flexing. This undesired flexing is what causes the body roll.

As for the vibration - it can be difficult to pinpoint what that is without me inspecting your car in person. There can be numerous kinds of vibration caused by numerous factors. But since you changed your mounts, then I pressume that you are sure that it is the engine. Then you might want to consider these (in order of difficulty): 1. Grade of oil: recommended is 0W-20. This is a thin oil recommended for eco engines. 2. Air intake is not obstructed 3. Fuel - make sure you get your fuel from reliable stations (i.e. no water added, correct octane rating) try 95RON instead of the minimum allowed which is 91. 4. Inspect Spark Plugs and Ignition Coils - if at least 1 of these is defective, it will cause vibrations. 5. Alternator - while running, this will supply the electricity to #4. If not enough electricity is generated, then #4 will be affected. 6. Compression - check the pressure in your cylinders. Maybe one of the three is having loose compression. 7. Timing - this is unlikely since 3A92 engine uses timing chain, but this can be the worse case problem.

@@tripnaminph ty bro! Will check on those.

@@tripnaminphgood day sir cruious lang kung ano tools pinag gagamit nyo, nung pag start sa video at hanggang matapos ano ano tools po ang specific name nila at lights din! Kasi mukang specials tools mga gamit mo thankyouu sana mapansin

Yes. Even copper. Iridium yun stock kasi pang matagalan ang iridium. Pero in terms of performance, copper ang the best. Gitna ang platinum. As long as same ang sukat, ok lang. Sa case ko, every change oil ko kasi iniinspect ang sp ko. At mura lang naman ang platinum, so palitan ko na lang lagi. Yun stock ko na iridium, nabasag nung 25,000km pa lang. So kung imamaintain mo nag iridium, still inspect every 25,000km.

Ilan Ang odometer para mag check Ng SP? New owner Ako Ng Multi Cab Salamat​@@tripnaminph

Platinum gamit ko sir, less than 600 3 pieces na yun

​@@tripnaminphah Mura lang pala SP?

Mura ang platinum, pinakamura copper. Mahal ang iridium pero mas matagal maupod ang iridium tip, rated at 100,000 km. Kaso, yun iridium na stock ko ay nabasag yun ceramic insulator at 28,000km, kaya pinalitan ko ng copper. Walang silbi na 100,000km ang iridium tip kung yung ibang part ay nasira. Kaya need i-inspect ang sp every 25,000km. @@niloyu105

Hello sir. 5/8 yun mismong socket size na kailangan para sa spark plug. Pero ang tinutukoy nyo yata ay socket drive - yun koneksyon ng socket at ng ratchet. Depende sa sukat ng ratchet nyo. Yung sakin ay 1/2. In short, ang spark plug socket na 5/8 ay pwedeng 1/2 or 3/8 ang socket drive.

@@tripnaminph Ano po ang Tatak ng Extension Bar at Deep Socket mo?

@@rylefern lotus sir. Torque wrench ang gamit ko po.

Maganda sir. Smooth ang andar parang bago ulit makina ko kahit 130000km na. Pang limang change oil ko na to sir.

san po mas mahal aisin o yung Mitsubishi genuine oil?​@@tripnaminph

Hindi ba ma init sa engine yan Yung iba 5w 30

Tara hehehe

Hindi na sir kasi konti lang diprensya kung ipapareface at bnew na disks. At may minimum thickness lang ang disks, pag nireface mas delikado pa.

Ayos na ayos din sir. Kakagaling ko lang sa Daet, Cam Norte, balikan lang kaya sobrang nasubukan ko ang Hi-Q sa mga zigzag. Hindi ko madistinguish ang difference sa stock na akebono at bendix. Actually parang mas ok pa nga kumpara sa preno ng 2020 GLX CVT namin. So naniniwala ako na wala sa brand (except of course un mga fake at super low-cost), kundi sa proper installation at maintenance nakadepende.