- 18
- 113 898
D-Mover
Singapore
Приєднався 5 чер 2017
High immersion motion simulator, compact & affordable. D-Mover, make you feel realistic, therefore fun!
Peugeot 205GTI Dirt Rally 2.0 motion sim | Best Traction loss | Affordable Realistic Motion Sim rig
Compact Racing & Flight simulation rig, High immersion but affordable price.
How is D-Mover solution?
D-Mover Realistic Motion Simulator Technology based on physics
Center of Gravity(CoG)- The D-Mover method for full motion simulation is based on the center of gravity (CoG) being aligned with the center of rotation, in an 4DOF + 2DOF axis control system. Real world vehicles and aircafts operating in an Earth physics environment also behave in this similar way.
Since what you see on the screen is what you will feel in the seat, it feels natural, are the same experience as real vehicle or aircraft rotations and translations.
For more information, please visit our website: d-mover.com
How is D-Mover solution?
D-Mover Realistic Motion Simulator Technology based on physics
Center of Gravity(CoG)- The D-Mover method for full motion simulation is based on the center of gravity (CoG) being aligned with the center of rotation, in an 4DOF + 2DOF axis control system. Real world vehicles and aircafts operating in an Earth physics environment also behave in this similar way.
Since what you see on the screen is what you will feel in the seat, it feels natural, are the same experience as real vehicle or aircraft rotations and translations.
For more information, please visit our website: d-mover.com
Переглядів: 294
Відео
D-Mover H4 noise comparison with game sound on and off | High intensity test on Dirty Rally 2.0
Переглядів 1,3 тис.2 місяці тому
This is a noise test video of our D-Mover H4 motion simulator, the tested game is Dirty Rally 2.0,the video also shows how to start, parking, and shut down the simulator in the game. For comparison, the game sound is turned off in the first half of the video and turned on in the second half. The simulator was set to high intensity, and the microphone was 50cm away from the nearest actuator. For...
McLaren F1 GT on Forza Horizon 5 motion sim | Affordable Insane Motion Sim rig | D-Mover simulator
Переглядів 6 тис.2 місяці тому
Compact Racing & Flight simulation rig, High immersion but affordable price. How is D-Mover solution? D-Mover Realistic Motion Simulator Technology based on physics Center of Gravity(CoG)- The D-Mover method for full motion simulation is based on the center of gravity (CoG) being aligned with the center of rotation, in an 4DOF 2DOF axis control system. Real world vehicles and aircafts operating...
Microsoft flight simulator 2020 on high immersive D-Mover sim rig| Realistic Flight Motion Simulator
Переглядів 7002 місяці тому
Compact Racing & Flight simulation rig, High immersion but affordable price. For more information, please visit our website: d-mover.com
Don't buy a motion sim rig, unless you tried D-Mover H4|Assetto Corsa Monza Track Practise
Переглядів 2 тис.2 місяці тому
D-Mover H4 sim rig is one of the most realistic simulators you can find on the market. If also considering its price, it is truly worth to have. Compact Racing & Flight simulation rig, High immersion but affordable price. How is D-Mover solution? D-Mover Realistic Motion Simulator Technology based on physics Center of Gravity(CoG)- The D-Mover method for full motion simulation is based on the c...
Roller Coaster Simulation| Realistic Racing & Flight Motion Simulator|High Immersive, Insane Fun
Переглядів 1,1 тис.3 місяці тому
Compact Racing & Flight simulation rig, High immersion but affordable price. For more information, please visit our website: d-mover.com
Forza Horizon 5 Racing| Most Insane Motion Simulator |High immersion compact home use sim rig
Переглядів 1,6 тис.3 місяці тому
Compact Racing & Flight simulation rig, High immersion but affordable price. For more information, please visit our website: d-mover.com
Forza Horizon 5 Race|4DOF Insane Motion Simulator with Traction Loss|High immersion compact home use
Переглядів 5334 місяці тому
Compact Racing & Flight simulation rig, High immersion but affordable price. For more information, please visit our website: d-mover.com
4DOF Simulation rig with Traction Loss|High immersion compact simulator|Dirty Rally 2.0 test
Переглядів 1,9 тис.4 місяці тому
Supply Racing & Flight simulation rig, High immersion but affordable price. For more information, please visit our website: d-mover.com
High Immersion, Real & Sync feedback of snow road details | Dirt Rally 2.0 | D-Mover-H3 Motion kit
Переглядів 654Рік тому
Use our D-Mover H3 motion kit, you can upgrade almost all the aluminum profile frame racing static seat to a motion G-force seat. Our D-Mover H3 Motion kit is compatible for the latest Simtool 3.x, bring you awesome immersion, simplest use and very low price. For more information, please visit our website: d-mover.com/
4DOF Motion Platform Racing Simulator | Dirt Rally 2.0| D-Mover Highend Simracing Motion Rig
Переглядів 8 тис.Рік тому
D-Mover We are an affordable Racing & Flight Motion Simulator company to meet all your gaming needs. We provide high-end motion rig with affordable price. Contact us today for a quote.
Micro 12VDC linear actuator new update
Переглядів 85 тис.3 роки тому
Micro 12VDC linear actuator new update
Great sim rig! I have a few questions. I am currently considering about to purchase Motion Sim system and couldn't decide which one I should go with. I have looked Simrig, eRacing-lab. I was going to go with eRacing-Lab but then I saw your system. 1. I understand that you have your own controller and don't use Thanos but why not support Simhub? EVERYBODY is using Simhub and how come you don't support it? 2. Since you don't use Thanos, what do I do when things go wrong? 3. eRacing offering is quite tasty because they offer 6 DOF with less money than you charge (Including shipping). What is your advantage over them? 4. What is your plan to prove that your system is reliable and trustworthy? Other systems have been around long time and proven good by many users, but your system has no reputation to warrant shelling out $5000 US dollars. 5. How much shipping to USA? I have purchased many things from China (AliExpress) before and my experience with them is not so good. Once you buy from China, you have to forget any support at all. I really think China failed to prove their trustworthiness to the world. 6. What is your plan to change that? Thank you for your time and I really hope the system turns out very good and also hope people love it in the future.
Man I look at one freakin' video of a motion simulator in a crash and now I'm getting non stop recommendations for sim videos 😔😒
Which is the largest (fastest actuator) part #?
The gear shift is the other way around, to go down a gear you push forward, and to go up it is backwards, that's if you want to simulate...
For 100mm are using multi start thread if so how many starts you are using & diameter of screw ?
Can you attach monitors to the RIG so they move with the rig
What happens when you flip 😅😅
@@Jkonich Maybe throw up my breakfast😂
can you do a video of it parked and showing how to get in and out of it, also with no game sound so we can hear the sound of the actuators, please?
Yes, I have just released a new video as your request, please move to see. Than you!
@@d-mover Thank you. that really does look great.
I really, really like this set. How much space do you need for it? Is it possible to make a mount for a 49-inch monitor and hang it permanently on the platform? What is the possible load for the actuators? How loud is this set, can you see the gameplay without the game sound?
Thanks for your message. Our d-mover H4 is a compact simulator that only requires 1.5mx1.2m of floor space. The monitor can be easily mounted on the platform using standard aluminum profiles, but this is not recommended because the monitor can easily be damaged by vibrations, and another reason is that this shoud not be the right way to set up the monitor for most racing simulation games. Use a monitor mounting bracket and place the bracket directly on the floor, or if you don't have vertigo problems, use VR headset would bring you a better experience. The platform can withstand a maximum payload of 280KG. We have tested that the noise of the platform itself is about 60dB, when running games. For more information, please feel free to contact us at: frank@d-mover.com
The emergency stop button is useless where it’s located. If that sim goes out of control, they’re screwed.
Yes, I should place the emergency button on a right position, while not like this. Thanks😀
Make the seperate Surge add on for more response on every move rather than Stewart 6 dof. Sway is not that important so 5 dof is perfect especially seperate Surge add on
Thanks for your comment! Yes, separate surge & sway modular addon are in development, in fact they are almost finished and will be available soon.
Do you sell those ?
Yes, you can buy at: ttindustrial.com/shop-online/linear-actuator/
Imagine the immersion in a flight sim with this
Can't wait to try this with my favorite racing games
all of that to play with outside camera? lol
Camera settings are a personal preference and have nothing to do with the hardware device.
Psyche...
Bro what if we crash??
Trust me, you don't want this to happen, Bro
No surge, no sway, no thanks.
Surge and sway will be have soon😅
@@d-mover you will love it!
Whats the motion controller?
Motion controllers are special devices that control the engine operating modes. In other words, it’s the brain of every motion control system. As such, its task is telling the motor what to do.
@@d-mover sorry. I was asking what is the motion controller that you are using? Thanos?
@@meanmartine97 No, we use our own motion controller which is integrated into the actuator.
@@d-mover i see. Is it closed source? Can it be integrated with other tools such as simhub?
@@meanmartine97 Open source, but intergrated Simtools only.
This probrobly has compatability with 2 games 💀
It's compatible with a hundred of mainstream games, Bro.
very neat setup, my only complaint i can see so far is the distance the screen will have to be away from the rig, tons of different applications though!
The screen setting doesn't have to be so far away from the rig, you can set it closer, or triple screens, or VR
Shaking flushed on the back of simrig be like : 😳
@d-mover: does it have surge?
Could you show some videos of flight simming please.
Sure, flight simulation videos are being scheduled and will be uploaded not long. Please follow.
Wouldn’t mind rinsing ACC on a motion rig. Maybe you could sent me one to review! 😉
Please follow, will try to do later 👌
❤
Is this 4 dof? Yaw,pitch,roll,heave? Any plan for Surge movement as add on like Eracing simulator? Your simulator seems better than Eracing because of bigger range of movement.
Yes, it is D-Mover H4, a pitch, roll, yaw, heave 4DOF motion simulator as you said. We will push our full motion simulator before the end of this year. Honestly, our simulator is better than many others, is more natural and realistic. It's not only because of bigger movements, more important is that our patented structure, it is designed to simulate the physics of the vehicles behave in the real world. Thank you for your comments. Just let me know if there is any question.
@@d-mover can i use Thanos motion controller if something goes bad in the future?
@@ji3200 Because our simulator is a plug-in&play system, the controller is integrated into the actuator, you can not use any third party controller. We are still in the promotion until July 1, not only enjoy the discount price with free shipping, but also provide two years guarantee. If you are interested, please send your shipping address to my email: frank@d-mover.com. I'd like to check if it is within in the free shipping area. Thank you.
非常羨慕你的設備👍👍👍
Why are you trying to sell your technology and showcase it with a poor physics game like forza? Do it proper with ACC or AC or iracing... Where people actually are looking into investing into such cockpits.
Thanks for your suggestion. Yes, we were planning to show some simulation videos of hardcore racing game like Assetto Corsa, will be soon......
I am looking to purchase 2 6dof rigs, do you have any plans to offer 6dof simulators?
This is a custom solution with brushless motor.... 😊 (In my opinion)
Great Demo again :) Does your sim use AASD Motors and controlers or is this your own motors and control solutions ?
It's our own motor and control solution. Please see our website for details.
Wow only 4.8k on your website, that's a very good price for an impressive machine. How did you manage to reduce the cost on your actuators ? :)
Brother, you are a knowledgeable person and you got the point right. For a long time, we have been thinking about a question: why are the motion simulators on the market so expensive or have poor performance? Since it's almost impossible to find one that performs well, is reasonably priced, is lightweight and easy to use, why don't we make our own? Based on this, D-Mover was born. After years of hard work, we developed our own specialized motion actuator and obtained the relevant structural patent for the 4DOF simulator. We use standardized components as much as possible and rely on China, the manufacturing center of the world, to turn our ideas into reality. We hope more people can experience the charm of a good motion simulation.
非常棒👍🏻
Looks great! When will we be able to see the product on the website? (Preview code is needed?)
Will be very soon, we are planning a initial release promotion❤
Can these be back driven?
Yes
@D-Mover a little too much force in my opinion. Looks like an arcade ride as it is over a realistic car sim, rally or not. Great looking bit of kit I gotta say. I'd just tweak those forces down a tad.
The actual effect can be tuned through software, and the video is just to better show the capabilities of the hardware.
Are there ones that use 5v
These are a blatant knockoff of Actuonix actuators. Why don't you create an original product?
It's kinda like generic drugs. If the patent expired, anyone is able to manufacturer the product. My only concern is if the patent hasn't expired (probably the case) and IP was violated. Really hate foreign companies that do that.
How many inches or meters does a linear actuator projects in ND out?
asking way too much
very cool, awesome, subscribed, @arduinomaquinas thank you bro !
how heavy can the rider be?
rated 200KG.
Link de compra?
I want the Cable Piston to move back and forth at all times, without changing energy directions. What should I do.
same here
Add electronics or face the fucking
You need to change polarity to move it back and forth but you can do that with an h bridge driver
are those programmable?
Sorry, but not programmable.
офигеть! вот это его крутит
Nice job !!! 👍 Is it me or the actuators seem to move due to the flexion of the U profile ?
Yes, during the movement, the action of the actuators will produce big impact forces, and there will be a little distortion at the connection part. In addition, the video is shot with a fisheye lens, which will also amplify this feeling of distortion .