Відео

What size is this van?

What if the bike has mudguards?

What camera are you using you using?

Was the video at 1x speed all the time during cuts? I like to watch real cuts and sound, at least long enough to feel reality. Also suggestion - keep speeds and feeds visible during whole cut.

Top

3 phase or single phase power?

would love to hire you on for remote programming, look us up buddy!

cam strategy is terrible

Nice

I really like how the handlebars end up close to the wall. Folding pedals would make the bike even safer to walk past. Good work!

Awesome video !!! thank you so much , helped me tremendously 👌👍

hi what is the brand of the machine as well as model...and capacity... (Size also)

Nice work! Glad to see you have enough sense to use a circular path for the full width slotting, rather than cutting the squiggly path the whole way like most youtube machinists :) After that I use vertical motion to clear most of the material between teeth, and then a single rough squiggly pass followed by finish pass.

I have problema with 3153 multicam cnc router It show " safety hold activated" after trying to start up.

Everything is cool! You are well done! Please tell me! I have a self-made CNC, its accuracy is 0.05 mm. Will this be enough to make such a gearbox? Is it better to order on professional equipment? To make, for example, 0.01 mm. I'm thinking of using aluminum bronze to reduce friction

So fun to watch!

Very cool company. Good for you!

Superb manufacturing base. Saw you at Cycle Show and bought the Up. Wishing all the best and success for you and your family :)

Nice ❤❤

Which van u have

I'm an engineer, and most of these video show machining (milling)? Why do you have the cutter stuck out as far as you can? The tools should be as short as possible and not like a bore tooth hanging out.

if you dont have a air assist , 3d print a fan that simply slider onto the shaft of your endmill th help clear chips

Hi George, A friend Max has a three bike rack off you for his Peugeot expert, I have the Peugeot Part Tepee. It has a 60/40 Isoflex back seats, once removed there is a step down where your feet would go. Has anyone asked if your rack would take a road bike. I'm looking at the two bike system, look forward to your reply.

Would be great if this product could be fixed to the bulk head and pull out towards the back doors for use! Can it or does it have to fold back towards the bulk head?

Oi Bruv! Bit of a big baby biscuit simple as!

Really Clean Operation. What type of coolant are You using? Keep on Truckin!!

Hello from Turkey. Thank you for sharing the feed and speed 👏

Excellent job and a very clean cut with a Router CNC machine

guys command do I skip line? I have a 3.8 slot and the cutters sometimes come in the right size 3.8 but if they come smaller I put the second pass, I wanted a command to skip this second pass. help me please.

Damn!!! Thats awesome!

good clip! Did you get to making any training vidoes ?

Hi :)

3:29 So satisfying!

Can I know what controller you use? Is it Mach3 driven? I am having an issue where my machine is losing steps on the Z axis when doing parallel cuts. Every hardware seems nice and tight. My theory is that when it end a pass in the X direction and go .1 mm in the Y direction to begin a new pass it is not responding fast enough to the Z change and it is missing a step. You can notice the bit going deeper and deeper as it goes further in the Y direction. Should I try feed optimization or turn on the CV controller on Mach3?

Great video, is it possible for an upgraded 3018 CNC with makita spindle to something similar?

Absolutely love your story. Was made aware of the product through Paul at Criterium Cycles, and hopefully should be making a couple of purchases from you in the near future. 👏🏼

Do you think that i can do that with a regular 3018 or i need a upgrade?

Why do you call material 'stock' like you're American?

how much is the spindle power ?

What’s the camera set up you’re running here? Like the shallow depth of field on the close up cutting shots.

Gorgeous. Very helpful video. thanks for posting! :D

That machine is solid as, have you done a video about it?

Great video mate! Do you know what class of surface roughness is achievable with that kind of 3D surface milling before polishing? Is Ra=3.2 a good guess? :)

hi, i have the same cnc, mine is 3x2 meter but its the same model, can you help me to insert it in fusion 360? or can you link me a guide to do it? thanks, awesome video, keep the good work.

No nonsense content.

perfect, you are expert , i admire to your work.

A beautifully thought-out, designed, and manufactured piece of work! Sadly, my cycling days are long gone. :o( Thanks for another clear and informative video. Liked & Subscribed.

1:00 Sir, what kind of toe clamps (brand, model number) are those? Could you please tell me. Thank you in advance.

Very nice sir. Very nice. I almost want to eat one of those discs like a cookie.