Відео

you know its bad when they have to make 2 different Facebook groups for the same shit... "razors for adults with out company sponsorship" 😆

25ish depending on rider weight

tbh i havent even done it yet lol, i gave it the ole eyeball and it drives pretty damn straight!

@ModdedByP I'm in tampa brother keep up the good work.

@@CharmleysChopShop I lived in palm harbor for many years! I still have a 727 number too!

only if you put a bigger motor and you would need to make something or buy something to mount it, a new controller to support the correct voltage you want to run. This is a 24v over-volted to 36v.

these were a 275/45/r20... im on a 275/40/r22 now, got some bigger wheels

Nice 👍🏾

@@stakkcord only for the battery connection, but you could use another type of splice connection if you wanted

true, what's in your garage? don't worry ill wait...

it's reverse threaded... hit with impact in reverse

it was awesome! its really a great product that fits tight... I've recently learned that some people don't even glue it, just rock it on there raw dog!

yes! most of all the razors use the same parts!

It’s like buying a iphone 14 months before the 15 comes out and expecting to get the 15 for free from apple just because you bought the 14😂

@@Rippinandfishin its not though... imagine the i phone came out with the 15 2 months after the 14 that they knew was having issues... and to top it off the the 15 is cheaper than the 14... thats what im pissed about, you can be an e n c fan boi all you want, the ecp anything is trash compared to new kunray or sotion

@@Rippinandfishin and then then tell you for 100 dollars more we will sell you the parts to make your 14 a 15

@@ModdedByP I kinda get your point but you took it to far with the threatening and name calling. I’m am not a fanboy just because I like their products.

@@Rippinandfishin i fail to see how i threatened them? Other than choosing to not buy any products from them in the future... I say in the video twice that I know im a nobody and fully expected to be talking to a brick wall... doesn't change shit about their companies practices and faulty/under tested products, especially in a world where they think they hold a monopoly because they "did" it first. Words hurt fuck your feelings, This is all just my opinion on e n c. Period.

maybe 30 mins at 20mph

6 or 8 hours is over $1000 for just the battery and it probably wouldn't fit on a small bike like this, 2 fully charged batteries get me about 45 mins of ride time... on my big 72v with a $600 battery I only get about 2-3 hours depending on how fast you go. Your butt will hurt after about 30 mins, why do you need 6 hours of ride time?

@@ModdedByP i like to ride everywhere thats why

Do you any good batteries that are 160 that can last atleast 2 to 3 hours

?

@@InstantHighlights-t2e cheap, long lasting and good quality don't really exist. Even my $600 72v battery is from china still. If you buy a cheap battery it can fail and blow up! Its a buy once, cry once thing!

probably! anything is possible! it has a tab welded to hold the spring in the bucket but you could weld one on the other side...

Yup, i have around 4k on my ec4p v1 as well. I was one of the first with the v1 that received it week 1

I just knew they weren't going to do shit for me, but your right

@@MooseRidez what size gearing and wheels?

@ModdedByP 10in custom burromax wheels 11/65 #35 chain. All on my channel aswell

dude e&c has awful customer service, i asked them for simple data on motors they "developed" (TOTALLY not white label) and they basically said "dont know, heres an upsell tho" genuinely spent the whole email conversation trying to upsell me on shit and move the conversation away from my actual questions. tldr; get off they dick cro

I bought some rectangle stock tube from onlinemetals.com

Sorry and it’s a 1/8 thickness I checked and they said they don’t have that thickness

I think whatever I bought was slightly thicker than an eighth I have to check my order form later on

ok so it was actually metalsdepot.com 1-1/2 X 1 X 11 GA (.120 wall) A513 Rectangle Steel Tube is what I ordered item #: T1112111

Like how do you know what everything does/what to change

the kit came with smaller bump stops for the rear but I over-torqued them and they fell apart... so no bump stop in the rear...

in the back no bump stop, I honestly cant remember about the front... I think factory bump just hits the lower DJM arm

been a while since then but it was fairly quick from what I remember, maybe a week?

i definitely avoid water and mud, but a little dirt never hurt!

yea you wont find the music because I make it lol @producedbyp

Thanks man!

About 30 mins depending how many hills and how fast your cruising

What's getting messed up on it? have you attempted to re torque the bolts? DJM Told me to use lock-tite on the factory bolts... i havent jacked it up since then to re check mine but the steering wheel is shaking a bit for me now... I think my drivers side is already sagging again with a new spring in it...

@@ModdedByP the insides of my front tires get eaten up with the negative camber. I have had 4 different alignment jobs on it and even went with custom cam bolts. Ones with individual holes vs the factory cams. After 3 thousand miles I retorqued everything and every 5 miles from that point. But it's all new underneath as in suspension, new steering rack n pin, new sway bar links, new shocks, new upper and lower control arms, new rear main seal, new brakes: it's all new and I still can't get a straight alignment. I wish I knew the magic mechanic to fix this issue...lol

from what I have seen on my drift cars the toe will wear the tire way before the camber... I run like -4 degrees on the front and never see tire wear. I would definitely try an alignment shop that does lowered vehicles regularly. I'm guessing you cant get anymore camber out of the adjustment, are the control arms on the wrong side of the truck? just seems crazy you cant get any more out of camber adjustment @@jasonchambers2435

When I put my drop on I had to completely rebuild my entire front end plus new wheel bearings once I did that it really tightened up the front end and now my alignment stay straight

but did you die though? lol some times just got to live a little 😅

I've seen potentiometers you can run to turn them down... still haven't got around to it on mine... my wife rides it now!

thanks for watching!

amazon but ultimately didnt even run a fan and it doesnt over heat...

I could defintely put a 36v motor from a bigger razor as long as its 36v this controller will run it... stock 36v is 500w the motor on there now is only 250w

Ok cool.I ordered everything from ur links.I think I'll try and update the motor at a later date once my son gets used to the extra speed

Working on this project but don’t want to mess up anything please boss. Would like to know what to cut, still as well as wiring. Got all the parts from your description

If you want to message me on Instagram or Facebook I can guide you through it @moddedbyp

@@ModdedByP THX BOSS I WILL!!!

This basically the biggest frame razor they make, but guys your size ride these all the time!

You're definitely going to want bigger wheels and upgraded suspension to give it a lift

@@ModdedByP I was just watching ur other video where u said on ur other one u modded it it looks pretty sweet

I think he tried to hurry up and rush my order, he never even sent the brake bracket adapter (the only thing he was "waiting" on to ship my order out)

I'm running a kelly kvd 7212n but the new craze is the far drivers... looking up fardriver nd72300

I'm not sure how far it will go but it runs for a solid 30 mins -45mins depending how fast your cruising

with the current gearing setup up (11t/72t w/ 12" wheel) it will do about 45mph (closer to like 43 actual)

Awesome thank you! Trying to decide which direction I'm going to go. I want the 1100 w electro and Co but I'm looking at the hotpaxx

My buddy mike runs the entire hotpaxx kit and its worth the cheaper price IMO Elec & co is taxing and they know it...@@amcustomfab

Awesome! Good to know. They probably have to charge that much more just to pay for their California taxes unfortunately

Does the controller come with a tune on it from hotpaxx

The batteries used on the Mx-400 are about $70 for two 6.5ah Dewalt style batteries... you could probably find some cheaper but I got these on amazon. The wiring is easy because the Fast scooter kit is labeled and plug n play. just have to connect the two power wires for the battery,

@@ModdedByP Do you have to put a fuse between these batteries? I’ve seen that done in other builds. Not sure if it is necessary though

@@h0nd0 it wouldnt hurt, i just dont care if something gets fried!

I put the front forks/wheel from the sx500 on the mx400 I have. Pretty soon I'm gonna add some metal extensions and put the rear wheel on it as well.

yes! 4" extension on the wing arm

Sick!! Mines still running strong!

thanks man, me too! Cant thank yall enough for helping me out... I think this build will the best thing I've ever built.

Check my vol. 2 vid, has links in the description for every part on this build!

it's not from e n c... just the heat sync is and I bought the controller directly from Kelly so it doesn't have the x tune (its not hard to tune)

@@ModdedByP i know. the models dont change. the 7212n is a smaller weaker model. i had that one for afew years. it has a small heat sink on it and runs way less amps. 70 cont/140 peak.. the model you have is a either a 7212nx or a 7215n which run more amps and have the big heat sink. 90amp cont/200peak

Sweet! Its still going strong I haven't had any issues yet! **knocks on wood*** 🤣😅 build one, you will not regret it