Відео

After doing this process Thanks to your video, (i have liked and subscribed), I have some smoke originating from the middle (like the area below the newly installed valve cover) if some smoke is getting into spark plug ports would that cause this? i have driven about 8 miles and still some smoke but not as bad as first 10 minutes was and no engine error codes yet. No signs of new oil dripping on my test cardboard box under car previously the car would leak oil actively onto ground. I know some say smoke no big deal its burn off but when should be a big deal? I did get entire valve cover and followed torque levels etc you provided.

You make it look so easy.

Excellent Video. Great demonstrations of the LED vs Halogen in both Low Beam and High Beam. Great explanation. Thank you for sharing.

bro lets film smth funny:

*Can the Modis handle immobilizer and controllers for a 2002 Town Country Limited?*

🎉🎉🎉🔥🔥🔥🔥

It’s made for the sport front bumper not the base model

How did you take the intake inlet off that hose by the throttle body???

What’s the best way to contact you about making a y’all sensor bracket

This is the best video so far- thanks so much for making it!!

💯💯💯💯🔥🔥🔥🔥

Where does that even go?😅

My clutch makes a clicking sound but it doesn't engage the pulley

If XTOOL wasn't taking the scantool industry by storm 2 years ago, autel probably would've left the MK808 & MX808 super basic. they saw XTOOL was making WAAAVES. so they HAD to compete & send a software upgrade out 😂 😂

Absolutely amazing video. Thank you so much.

Nice , great replacement to Halogen bulb 👍

You are a real one.

Sheesh 😬🔥

🔥🔥🔥

I have a 2014 impala 3.6L, I replaced the Brake pedal position sensor, and it is supposed to be recalibrated, can this Autel recalibrate this sensor? Reason I replaced it was my brake lights would come on randomly with the car off just sitting on my garage. Thank you.

Do you know if the Autel can calibrate a wastegate actuator for the turbo on Hondas?

That crash was definitely a typical mustang driver 😂😂

The grip was a little bit lower

This shit cracked me up 😂

🔥Too clean

That is an upgraded one. JIT I believe, save yourself some pain & $$$ and skip the “heavy duty” CSC’s. Get a relocation kit preferably ZSpeed CMAK and be done with it.

🎉🎉🎉🎉🎉

Life saver! Great video! Thank you so much!

Super Mario Brothers love VQ🔥

Good job Prol very profesional

Can you put a link to the part numbers and where you bought them?

So i just replaced mine because it was cranking but no start, and still does the same thing. I also checked the relay and it work. I also cleaned the throttle bodys and filters. Do you have any ideas on what eles could be the problem??

Will any year engine from a g37 fit in my 2008 g37 coupe?

I have the same scan tool and i love it

Thank you. Great Video

Bro @prolbuilds can do it all!🔥🔥🔧 Can't wait for next episode

Aprendo mucho contigo con tus videos

How are these valve covers holding up? Im interested in buying these

If you buy the upper version of Altel and will do more and the same. It's all up to how much money you want to spend

Me gusta mucho lo que hacen

Good job Giovanni

Exelent video One thing to notice is that after you place the cover back, you have to make sure the spark plug tube doesn't pinch the gasket. If it does, you will have oil leak into the spark plug hole not fun. The way I did it was to sit the cover and start the screws and with my finger nails pushed the gasket outside the tube on bank 2 is not bad but bank 1 is a pain because the firewall you will need a mirror and a flash light. I hope this helps someone.

Tempted to do this myself. Last time my arm got stuck replacing a serpentine belt in my G37 lol. How much clearance is there in the back there?

Thanks

This is a good thorough and detailed video. Subscribed

Did I hear turbo miata at the end?😏👀🔥

@prolbuilds You said step by step and I appreciate that, however the part I most wanted to see is how you unsnap the power connectors on the fans. It doesn't really have a push tab it has some kind of a pull tab and I don't want to break it but it doesn't seem to want to separate. I just wanted to confirm how you did that. That's a step I was looking for that you didn't show, I think.

Nice explanation 👌

Nice 👍

It says right on there, “Theatrical use only.”