Відео

This belt was 10 years old , didn't show any wear but i don't think you should wait longer then that anyways it's cheaper to be on the safe side and do it every 5 or 6 years , i bought this motor from a friend and that was the first thing i did on it just to be safe .

With a puller you dont have to put so much preasure (and should not) on the flywheel for it to come loose with a gentle smack 👍

@@mavicrider803 Thanks. I didn't even realise my almost 20 year old engine had a kamrem. Oops. Though it does look in excellent shape. And my idea of hooking a couple of ratchet straps under the flywheel. attaching them to a beam above the engine, hanging weights off the engine carrier, ratcheting away and giving the flywheel a tap or two was a huge failure. Hopefully more success with the puller once it arrives.

Ordered a puller off Amazon. It was a piece of junk that didn't fit properly. Sent is back. Ordered another. Lost in transit. Ordered another. Lost in transit again. Ordered another. Finally arrived and didn't fit. Gave up. Went to pick up a pair of wellies at Jula and saw they had some avdragare. Bought one. Finally the flywheel is off. Didn't even need to whack it. Though the bolt has been soaking in penetrating oil for weeks. And used the gentle touch of an impact driver. Now I have a pair of avdragare that I'll never use again.

I don´t really know exactly but my motor is from 2007 and this was the first time the belt was changed. i could not see any wear on it but i should say at least with 6-7 years between the changes and your safe , but dont take my word for it , i bought this boat and motor from a friend and he didn´t do it so i made it to be safe , it´s no big money and the job was really easy so better switch the belt so you don´t ruin your enginge regards Peter

@@mavicrider803 👍🙏

Sorry can`t help you out there , that`s not a problem that i have been out for. if you set the markers like you say you have there should not be a timing issue? if the engine was working ok before the belt shift you must have got the belt one tooth wrong somewhere ? then my only advice is that you check the markers again to realy be sure it´s right , regards Peter

Hi , The white markers was made by me just to have extra checkmarkers on the flywheel so i could make a double check when it was assembled again, so the only markers i found original is on the camshaft and is the arrows pointing at each other, the flywheel didn´t have any that i could find so before you take away the flywheel make some extra marker just for yourself / regards Peter

Hi , you can`t see anny wear on the belt unless you remove it from the motor . it`s suppose to bend round the pulleys so they reinforce the timing belt to do so in one direction, if you see any wear on it you should not start the engine at all. when the belt is removed and you turn it inside out and bend it then if it`s dried or overdue you can see cracks on it. but never ever put it back after removal becuase it looks fine , just replace it . on my honda the timing belt was never replaced and that one was from 2007 i think , i didn`t see any wear on it but don`t take that as an answer . but at least change it now so you can be sure of that you don`t rip it of and crash the valves and the rest of your motor , it`s a cheap investment to replace it , regards Peter

@@mavicrider803 Hi Peter, thanks for your response. I have the belt already, but am hesitant to attempt myself as the manual calls for some special tooling to hold the flywheel in place, while using yet another special tool to remove the nut holding the flywheel. You made your flywheel removal look extremely easy. Do you think its possible to do the same on my Suzuki- just use an automotive flywheel puller to exert a bit of pressure then give it a nudge? I think if I can somehow replicate what you did on yours, I should be fine. Rudy-

@@CUBICHI1985 you don`t have to put so much preasure on the flywheel , then it`s just to give it a gentle smack and it will probably pop off,

@@mavicrider803 👍sounds good. I will attempt next week. Today I'm taking it out on the water for the first time, to see how it runs 😁. Thanks again man 🙋‍♂️🤙🎣

Hi it`s not superglue, it`s thread locker just to secure the nut from maby lose and fall off , better safe then sorry there / Peter

Your welcome , hope it was usefull to you / Peter

The hammer i used is a plastic hammer , if you just put some pressure on the flywheel it should pop of as easily as mine did , i don't realy know how often you should change the timing belt , mine was 10 years + so i did it to be safe , but if you follow factory standard they probably do it more often then that , but if you do it every 5-7 years you should probably be safe /Peter

@@mavicrider803 will let you know how it went. Thanks.

@@dennis4130 How it went? I have to do the same thing to my honda bf30d.

Hej Lars , jag märkte på med vit färg vid dom originalpilar jag såg för min egen skull. sen märkte jag på svänghjulet för att kunna checka om det stämde före och efter montering , filmen gjorde jag bara för jag hittade ingen film själv på jobbet och när jag ändå gjorde det så lät jag kameran rulla , hoppas du fick nån hjälp av filmen / Peter

I think they call them brake drum puller , just measure the diameter of your flywheel on the teeth , i can say thar every hobby mechanic in your neighbourhood might have one if they are into some car buisiness so you can pop it of if you show them this movie

I bought this motor from a friend and he has used it a lot , and i know this is the first time it´s replaced becuase he bought it brand new . And the timing belt showed no wear or other cracks but i thought it was time when the motor was 10 years and it has never been changed . But if you follow the service procedure i think they are supposed to be changed more often , but mine was fine. but with that less of effort and little money spent i would say every 5 year then you are very safe / Peter

Ok. Thanks heaps

thank you , i couldn´t find any tutorial on the honda 20 hp so when i did the timing belt job it was a small thing to let the camera roll . if it can help one person it was worth the extra time .

Thank you , if it can be to some help for someone i am happy 👍

Vrrggfffvbnhfffettghghggggggggtgggt4rrgggccccddxfxf

Thx