Відео

Could you describe the issue with your device in more detail?

I'll do it next week...

@@stenlindvest508 Hi Sten. Really like the workaround you have made here. It seems to me that you have uses 2 different sizes of cables to connect the Power Relay? Looking forward to your explanation on where the wires are connected as I am keen to test this. Got a price from a company to replace the circuit board for 12800NOK, fancy trying your solution first:)

I am experiencing the same issue and received a quote of approximately 12000 nok to replace the board. The technician temporarily set my ventilation to a direct mode, causing it to run continuously and consume excessive power. I am interested in trying your suggested solution and have purchased the finder 39 series part from Farnell. Should I remove the existing part and solder the 4 wires as you advised?

Here is an explanation video (PART2) - ua-cam.com/video/hl1mrNG2GvA/v-deo.html

@@azamjamil1457 Yes, you need to unsolder (remove) old relay from circuit board and use solution with cables :)

Hi, The blue part is relay interface. Relay itself is a small black part connected with interface and its quick exchangeable now

@@stenlindvest508 thank you! Do you have the relay part number?

Relay is included with interface - no.farnell.com/finder/390100120060/power-relay-spdt-12v-6a-din-rail/dp/3050827

Relay code 34.51.7.012.0012

Thank you for sharing. To date my "premium product" had consumed two rotor motors, a set of fan bearings and now this relay plus discoloration of larger clear relay bottom right(power section) Any idea what that is for?

In the video I showed that the rotor relay is faulty. When I tapped on it, the rotor started working. See my other video where I connected the relay using cables. Now it is very easy to change if something happens to the relay.

Fikk du hjelp med denne?

Jeg har det samme problemet, hvordan løste du det?

Hei. Det var rotor motoren som var defekt. Så jeg måtte bytte hele enheten. Kom på ca 5000kr med jobben.

Glemte og nevne at Rotoren sluttet å virke helt etter en stund.

Hello! You can find a solution in this video ua-cam.com/video/DoGho9FNzI8/v-deo.html

You should be able to choose this setting from camera menu as I remember

70mai a500s has only 4:3 resolutions. I hope they will update the firmware so we will have the 16:9 option. 70mai a500s has only 3 resolutions: 2592x1944, 2560x1920, 1920x1400. All of them are 4:3. The only one that has 16:9 aspect ratio is the rear camera. That one is full HD.

@@turbokiller You should do a firmware update, and then you will have a 16:9 video aspect ratio. Good luck!

@@florinp.5713 Thank you. I will try too. Faking idiоts only offering 4:3 like in the stone ages. I just realised this after receiving the cameras and spening lot of time and effor installing them. 😡

@@florinp.5713 I upgraded it to the latest firmware I still no 16:9 option! I hate those сunts! 😤

ua-cam.com/video/-yCIo7_Qmq8/v-deo.html

Helt enig med deg. Har hatt samme problemet idag for 2. Gang

Hello! Noise problem can be probably fixed by changing capasitor of motor. I have ordered 10pcs. from Amazon and try to fix this problem soon. So as you see I have also noise problem now :) www.amazon.de/gp/product/B07PDS6CW1

@@stenlindvest508 Thankyou for your quick response. Here is the link to issue. ua-cam.com/video/VtFKsOkjbIY/v-deo.html. Could you please have a look at it and suggest? Many thanks for the help.

@@archanaparmar9680 You have little bit different rotor motor, but the sound seems to be the same like mine. Try to change capasitor of the motor if you can. It would be cheaper solution for some time :). New motor could be over 100€. You need to clean the rotor surface and belt from dirt also. It reduces sound level as well.

@@stenlindvest508 Thankyou. Do you know where is capasitor located? Need to take it out and order same type, right?

@@archanaparmar9680 Could you send me the photo of the label on motor and also it would be good If you can unmount backside cover of motor and see what shape of capasitor you have there? sten.lindvest@gmail.com

Hello, I replaced the whole main board. I got new from reseller.

@@stenlindvest508 Will contact mine then. Thanks and Merry Christmas!

Do you mean belt slip?

Yes

You need to take off the belt strip and clean it and also the surface of rotor. I don't remember if driving motor position can be adjusted for incresing belt tension. As I remember belt can be opened...it is connected with somekind of connector? Then you can cut off some mm-s from belt. This will give more tension to the belt.

Thank you very much. It makes sense. I will try that!

Hello! I have an old model of VTR 300/B. New model should have different type of electrical main board and it is probably more reliable. I have had this relay problem already two times. I would recommend this machine if you get new (latest) model.

Thank you for the reply! I will check if they have updated this model so i hopefully dont get the same problems :).

The noise disappeared after I had took it out and tried to clean it as much as possible. Maybe somekind of scrap was making that noise.