Відео

@@seewaage good luck you can do it

@@McCormickLeatherandFurs Thanks! I really like the pretty liner you chose. I will probably do something like that too b/c it adds so much to the beauty of the work.

@@d.mccann9823 your welcome

@@Orangelionfur agreed :)

Thanks for all the videos Deanna.Could you share what cleaning liquid you’re using.I read where someone used acetone in the mix and then put fur and mixture in a garbage bag tied it off and put it in a dryer on air dry for 20 minutes.I tried that and it didn’t seem to do much good. Thanks again.

Call samuel Bauer Unlimited and get their fur cleaning solution . I used PERK a drycleaner solvent its not on market anymore, you could try denatured alchol. But not Acetone. ​@user-kd2mv1uw3g

O K sorry it was actually mineral spirits if that makes a difference

@@user-kd2mv1uw3g denatered alchol or stuff from bauers

@EmptyBox68 amazon, i think i put info for it in the description

Alright. I probably didn’t see it. Thank you!

a.co/d/cfQQjTY

@ryanmosley8250 i have a Bonis brand Fur machine, its a model A 16.

@McCormickLeatherandFurs ok thank you. Might be a dumb question but how would you recommend washing these if you needed?

@ryanmosley8250 you cant wash in water. Fur will shrink. You take to a furrier that cleans fur coats, its cleaned furrier method. Which is a fine dust of corncob fractions mixed with a solvent. The mixture is either hand rubbed into the fur or the item is put in a large drum ( dryer type machine) its tumbled so the dust works thru the hair the solvent mixture cleans, the grease, body oils , adhere to the dust. The dust is blown or shaken out, and fur is nice n clean. Basic description.

You are welcome!

Fur fun make a bunch

Ya fun beaver pelt, great way to do any fur pillow

Thank you

When it's big large blanket it is a big amount of work, when your setting up 18 pelts for a project it's almost like setting up pelts to make 18 pairs of mitts or 18 hats, the only difference is how it's cut and constructed after the pelts are wet stretched. They are a lot to manage when they get over 14 skins for me. My favorite size is the throw 6 or 8 pelts it's a very versatile size to use, and to clean if it needs cleaning.

good luck

Have fun!

Thank you

@@McCormickLeatherandFurs beaver prices were good this past year.

Coming soon

It should be fine, even with thicker seams, good kuck

Carve one out of styrofoam , you can buy a Styrofoam head form , or get a similar type head , wig head might work, good luck

@@McCormickLeatherandFurs thanks so much

Yes buy at Samuel Bauer Unlimited a furrier supplier for supplies you have to call order in.

Thanks so much its a great style hat to make

Would be lovely, you'll need 2 pelts they arent vety large, maybe 3

I think I did close the tail partially about 3 inches down from the hat edge, by hand . If hand sewing in the lining I'd turn the bottom edge of lining , you could try starting at center front sew each side part way along the edge you decided to use on the fur, when you get close to the center back leave about 4 inches at center back of lining and hat and turn the hat / lining inside out pull it thru the opening.. then smooth out your hat, tuck the lining in at the center back and slip stich closed, you could hand tack the lining at the front edge to keep it straight. and along the edge as needed in places if necessary

Look at SAGA videos on pon pons she had good technique

Samuel Bauer Unlimited , No Carolina, google, call order in they take phone irders

Usually small areas can be repaired , but furs do deteroriate, get brittle, dry , will crack, rip, and not much can be done if it gets too old. Sometimes, it's better to retire it and get a new one. You might be able to hand sew the rips and apply an adhesive cloth to the back, or some try duct tape to keep together, but overall, if it's too old, it's time to replace or cut apart and use sections that may be salvageable. Good luck

Thank you so much 😀

Thanks, Part 2 soon :)

Stay tuned part 2 soon :), thanks

Fun, no idea on that i just did wha i cpuld on these

Keep tuned. I'll have 3 of these for sale

Love toothbrush idea !!

Table w foot pedals 250. The head about 1K The motor should be replaced with a new motor, A servo motor is about 150.00, a clutch motor is probably about same cost

Yes cold tape buy at samuel bauer Unlimited, you have to call order in

I got the tassel caps at amazon

Yes it work well ! If you have a broken tail you can try using cord to keep sections together, might need a few stitches but I've fixed some also

Yes Bonis A 16 model i sew just about everything with it

Thanks for watching , subscribe share & like 🎉

Good luck a sewing background is helpful, new machine is a treat.

Yes, different ways to do, im going to make a ruff using hackles in 1-inch strips on the outside edge like the sunshine ruffs that are done, by some Alaskan Native group. Just need to find time they are exquisite

Yes for general use the 202 is similar to a A16 Ii would not suggest the other models, I've heard too many dont like the thick sewing those do.

Yes sews only edges of fur or leather, together

Factory recommends SAE 40 weight you can find on Amazon. Or some car stores. It is not 5 W40. Should be 40 weight.

Faster ! coyotes are larger so you won't need as many, watch my coyote blanket video.

you can trim your coyotes to a similar size once they are all blocked giving you equal size pelts to work with.

Even if you wet to just to get basic shape and pin to dry, they look so much better.

They are fun to make some take 2 days to dry

@@McCormickLeatherandFurs 👍👍👍

You can hand tackon inside on the brim , the flaps at spots to keep those sandwiched together . But yes the ribbon is sewn only to edge of outside flap,brim and then turned to lining. Maybe watch my beaver hat video.. you don't need to add any interfacing in flaps like I did on that video.