Відео

Can you show me where the vacuum cut bypass valve is on the pathfinder. I know it's somewhere in this area

I have a 1998, 3.3L 4x4 auto. 170,000 miles. My wife filled gas tank one day last week while it idling and it started acting like it was missing after that. She drove it 200 miles through the mountains and got it home. No codes. I opened the gas cap, that looks good, and the tank depressurized for no kidding, 5 to 6 minutes. At first it was heavy and wet fumes coming out, then eventually faded away. No visible leaks anywhere, or damage. I loosened the gas cap and drove it for 18 miles. No change. Acts like it's mildly missing. Plug and wires only 1 year old. No codes. Also, the RPM gauge shakes about 200 RPMs when it feels like it's missing. Any ideas? Do ya think my ignition coil just happened to go bad at the same time? Would that not toss a code? Thanks!

It took me 2 days. And the help of my nephew. It was the biggest pain in the arse I’ve done. I am not a trained mechanic. Watch the other videos, give yourself plenty of time and good luck. Or bring it to a mechanic. Give me old 4runner starters all day long. Besides that, these older pathfinders pretty good trucks

you are an imposter, you haven't done the work, this is a very difficult job. Actions speak louder than words.

Thank you sir. Very helpful

thanks for your video -- just watching to see what harness comes out with it for the coolant temp sensor/fan relays

Great video. Been meaning to change mines. Got a 1993 acura legend.

Great video!!Question. What is the part number for the pressure sensor?

Great video..where are you located

Thank you you amazing sir!

Sorry your video did not help to much blind spots

Terrable filming did not help

Can't see

Just wanted to let you know that your video saved me much headache and money. I have a 2004 honda oddssey and cable on latch came loose. Shut hood and the frustration began. After finding your video I created similar tool. And bingo it worked after only 15 minutes under van. Thanks again for this awesome video.

Purge valve is up front to release vapors into engine. What you replaced was the vent valve (solenoid) from the canister.

You didn't show how you did

You used a vaccum pump...

I’m having a problem where it will start just fine but the next day it won’t. It’ll fire up but immediately be killed then forever crank. The next day it’ll crank right up. I replaced all positioning sensors but crankshaft bank 2. I have an evap P0455 and p2188 code (running rich at idle). My guess is evap because I have no misfires and my spark plugs are new.

worked on my 2016 odyssey , thanks for sharing!!

At least 8 of theses 2002 pathfinders at my local junkyard 5 min from my house it's what I drive and it's where I get all my parts. That canister would be ten bucks hoses for free

Please use jack stands. Never ever use the factory jack useless changing a tire. This the first i have ever done a post to message. Very helpful your video. Please heed my sincerity

Absolutely genius . I’m so glad I found this. I have an 04 odyssey, and exact thing happened. You’re my hero today haha

This video sucks. Could not see nothing that was done to fix this latch.

Thanks for posting it definitely help me.

Crappiest starter replacement video ever. All you did was talk

Thank you for posting this video on YT

I have a 2001 pathfinder 4 wheel drive. I was able to get the starter out but it wasn't easy. Took me about 2.5 hours to replace it with my very basic tools. Was a very messy job.

Stupid video

A thousand thanks for this video. It got me on the right track. I also recommend this video to get a better look at the mechanism. ua-cam.com/video/YwhA5BcK1BE/v-deo.html

I’m having problems with my 2000 Nissan Pathfinder, I have a brand new battery..once I plug the battery cables in, all the lights cut on, but as soon as I turn the key to crank it, everything shut off..could it be the alternator or the starter? Or both?

Honda Odyssey 2001 belts

Thank you so very much...

Thank you for your help I’m just did it

Thank you so much

I used a fishing rod where it comes apart in the middle and at the end I put a piece medal that we use to nail a tent string to the ground because it has a 90 degree angle bend and just keep moving it around until open and it work.

Your time of making this video is greatly appreciate. You saved me a ton of money. Yes video is not professionally done but that's when people watching the video need to have a bit of patience and watch the video multiple times of needed. The man is under a car explaining what to find, with a rod, and with a camera. It worked for me thanks a ton

Can you do another video and show again how this is done but not shake the camera around so much, and explain in more detail what you are doing? I can’t even identify the area that you are sticking the bent rod up into.

U dont need all this drama. There is a hole u can see from anderneath . U put screw driver all the way in and move it left and right it should pop.

terrible video! light and camera moving all around can not see ANYTHING!! you should have shown what the latch looks like with the hood open so you can see what needs to be done!

Thank you so much for posting this! I took my battery out to charge it and then couldn’t open my hood to put it back in, so I couldn’t even drive it to the shop to get fixed. It was really hard following what you were saying, but I got the gist of it and was able to pop it. I’ve been without my car for weeks and I started to brute force the whole front end apart before I ran into your video. You are a life saver.

Got to save cash where you can. Glad it helped

Thanks.