- 7
- 73 895
Mattoo
Приєднався 14 бер 2016
Harley Davidson Low Rider S 127hp S&S 475 cam review
Discuss my thoughts on the S&S 475 cam. Start the bike up for a sound check. Review of dyno chart.
Переглядів: 28 148
Відео
Harley Davidson Low Rider S full walkaround all mods
Переглядів 16 тис.2 роки тому
full walkaround of my Harley Davidson Lowrider S and talk about the current mods to the bike.
Harley Davidson Low Rider S bassani road rage exhaust sound at idle.
Переглядів 8 тис.3 роки тому
Bassani road rage 2-1 exhaust video clip, sounds alot deeper in person.
hey mate im from sydney do u wanna sell the bike ?
Bike is super clean! Love what you did to it. Really tasteful mods!
What about the fuel consumption is it increase with the cam ?
Your bike was an inspiration to mine mate. I bought mine over 2 years ago and have gone a slightly different route, but every time I go back to your bike, it reminds me this was another reason why I got the LRS haha.
Thats awesome bro, I'll check your bike out, im still enjoying mine 4 years later, LRS great bikes
Sounds like shit
What kind of maintenance do you do on the exhaust? To keep it looking nice.
One of the coolest looking bikes ever made. Bought a '23 LRS. S&S cam and valve gear come next. Dealer wanted $2K US for mild SE cam install. Will wait for S&S just for the magnificent idle. S&S has been around for over 50 years. They know their stuff. Enjoy the beast.
Hey I really like some of your mods. Any way i could trouble to include a parts list and maybe some links where I can buy them. Those turn signal block offs on the rear. You made them? Want to sell me a pair?
Thanks bro, I purchased those turn signal block off's from a guy his buisness is called Hairy Customs you can get them from him.
@@mattoo6389Nice. I'll check it out. Did you get those low profile front turn signals from Moons MC?
@@floridapatriot9776 the front signals are from a company called HogLights
come on man , there way higher than all the dyno charts show across the major performance shops over the world, but in any case main thing is your happy with the performance , yeah there a good Cam great lope.
i have NEVER heard of a stock 114ci with 118 hp......
The 118hp was dynoed with the cam installed on the canned tune.
I love that sound
MY LOVE
Hey buddy, nice bike. I have the 117 also with S&S 475 cam with extreme ventilator intake and D&D Bobcat, tuned on the same dyno!. 133/140. Thing absolutely rips but I get a lot of exhaust crackle and spitting on decel at low rpm, do you experience this? Cheers
Hi mate, I dont get any spitting or crackle on decel, the only side effect that I have is it needs a little higher rpm in stop start traffic situations. It seems to not like low rpms in those situations
@@mattoo6389 yes stop start or slow traffic is a pain but on the open road it's a weapon. I might talk to them again about this crackling I get on the decel. Might see ya around, cheers
you just have to ride clutch more in traffic , keep it smooth @@rodenheap68
Sir can you have Instagram? i have some questions
what sort of $$$ are we talking about?
Waiting on my 23 fxlrs to be built, cant wait to pick her up 😛
Beast!!
Nice ride mate. I have been thinking about risers for my 21 FXLRS and yours do look like they could be OEM at first glance. After a few years of owning Torquey bikes I have developed a shoulder issue and I'm sure its from holding on too tight while I've been ripping on the throttle. The minimalist look is the look I went for with mine as well. I got rid of the blinkers front and back. I have had this bike a few years and its still a work in progress. Safe travels mate.
Cheers mate, just had a peek at your bike, sounds mean as, I follow Tommy on UA-cam he does build really strong motors. The risers really helped sit me up a bit straighter which helps with aches and pains The FXLRS is a great bike, ride safe bro
I understand mate I’m never selling my bike either
Badass bike!
Thanks bro
Fuck that awesome
I agree, fuck the warranty and I won't let Harley touch my bike. I'll do it myself.
Best way to do it mate, do the work yourself and you know its done right. HD are easy bikes to work on.
looking good mattoo
Thanks Bailee 🤘🏻
Beautiful bike. Keep posting more on the bike
Thanks bro, I have a cpl more videos planned
Sounds and looks beautiful!
Thanks bro
video has been out for a year, what are your thoughts on it now? any complaints? any other quirks you've noticed since owning it this long? I want to buy a bike soon and this is what I think I want.
2 years of ownership now, the 1st year or so I was in love with the bike with no complaints, I still own it and still ride it every week. But their are some things now that annoy me about the bike. 1st Is the oil blow by, only happens to me every 6th or 7th ride, I allways keep the oil lvl no higher than half full but it still happens, i might need to do one of the many so called "fixes" for this problem. 2nd is the suspension, it's okay on smooth roads but it hurts hitting bumps at speed, im going to upgrade to ohlins front and RWD rear when i have spare money. They are the 2 negatives for me. Overall though I still love the bike, best cruiser on the market I believe.
@@mattoo6389 ty for the feedback. What is the simple fix for the oil blow by?
Great video! 💪🏽 If you don’t mind me asking, how much did it cost to install 475 cam? Trying to get an avg ball park. Ty!
I dont have the paperwork in front of me but I think I paid $2200 Australian dollars for the cam installation and dyno tuning.
@@mattoo6389 bike sounds good. Is the $2200 including the parts or is it just for labor and tune? Thanks
@@crescentmoon610 that's including parts
Nice work! You updated only cam or also oil pump ?
Just the cam, pump and cam plate are stock.
@@mattoo6389 thanks for answer, and also tappets are stock?
@@francescod.5822 tappets and pushrods are S&S
@@mattoo6389 Thanks man, I think I will do the same on mine
@@francescod.5822 the shop I use advised me that why the aftermarket cam plates and pumps are good they are somewhat overkill unless you plan on going for big numbers. I only planned on doing a cam, nothing more, so I took their advice.
That sounds good!!!
How the mpG now with the s&s bro thx
I would love to tell you but I've never checked, it is more thirsty than stock.
Which license plate mount is that? Sick bike!
It was a cheap ebay buy, the sellers name was "myholders"
@@mattoo6389 right on thanks! Also did you run the bike with an exhaust and no tune? Or did you do everything at once? I ordered an exhaust and just curious if I can run it on stock map.
@@lucab69 I ran the exhaust on a map from the TTS tuner. It was fine. I didn't get it dyno tuned until I did the cam upgrade.
same bike, same exhaust, same intake, same cam, different tuner (powervision). Rode across country to my relatives house and back around 5000 miles or 8000 km. Sound is very nice and gas mileage was not too bad.
Thanks bro, that is one hell of a cross country ride, I follow your channel. It does sound good with that setup, I think I do need to invest in some earplugs, I find after a few 100 klms it gets a bit much.
where did you bought the foot pegs?
Harley Davidson 80 grit pegs
Sounds sweet Bro! I'm strongly considering the 475.
They do sound mean.
What pipe is that?
Bassani road rage
I have same motor, same exhaust, different air filter, different tuner. On a 2019 breakout m8 114 after dyno tuned I'm right at 130 torque and 116 hp. I have the powervison tuner and target tune. I'm in Texas so it's interesting the difference in the numbers between your bike and my bike.
130 is great torque, yes I see many different numbers with similar set ups, I guess there's many different factors to it.
@Mattoo yes sir. It's crazy how one gets hp out the cam and the other gets torque out the same cam. Mine is actually 129.51 torque and 115.76 hp but I just round it up.
💯
Did you have to buy extended cables for your risers?
Yeah needed longer cables on 8 inch rise
Beat of luck with your channel, man! You have my vote💯👍
💯👍
How'd you manage 127hp?
APL performance motorcycles dyno tune
@@mattoo6389 hell ya they did a hell of a job!
@@mattoo6389 I'm hoping to get the same results or close to that hp # I'm hoping for about 135 tq too! High hopes I guess lol
@@spoom937 they managed 127hp and 124tq I was really happy with the results. I have seen stage 2 numbers better than mine but also way worse. Definitely good idea to find the best tuning shop.
@@mattoo6389 my buddy tuning my bike has the same bike we have and he got 116hp and 130tq out of his! So I'm hopeful!
I have the ‘21 model. Just picked it up in February and got a nice deal (for a Harley). I came off an iron 883 so this bike seems like an absolute rocket ship in comparison. I don’t usually like the looks of a 2-1 on this bike but the one you have really compliments the lines of the bike. I absolutely love those risers you chose also! I’m assuming you had to change out the cables? Agree about the seat. Very comfortable but can be worrisome when you get aggressive with the throttle! I’m not much of motor head and this is only my second motorcycle at the age of 53, but the torque is absolutely addictive! Too much fun! I absolutely love, love, love, my FXLRS!! Love your choices! Looks awesome!👍
I agree mate the torque is what it's all about with the m8 motor, thanks for the comments im glad you like the mods, have fun riding your FXLRS 🤘🏻
Nice lowy bro i can see where you're going with it 🤘🏻 its the more subtle things i like the deleted rear indicators and lay flat plate like mine. Ride safe bro 💪😎🤘🏻
Thanks mate, alot of the parts I got was after watching your video, I loved the look of your bike.
@@mattoo6389 thanks bro. Its almost endless building these lol
Looks awesome, the mods you have done are perfect. Those are high dyno numbers, as there’s 15% difference between the two, are they Dynojet format? or are they Mainline format? Well done 👍
My next upgrade is the Dynojet as it currently has the techno vision tuner i just want to dail it in...
My next video is going to be about the cam upgrade and the dyno tuning by APL performance where I will show the dyno chart etc. Yeah very high numbers and very happy with everything they did to the motor
@@mattoo6389 mean bro cant wait to see it 💪😎
sorry to hear about the back brake i had a street bob with the same issue so i bought the 2020 low rider s and those brakes are perfect. scared me to death riding a bike with weak back breaks even with the abs installed. hope you find a permanent solution.
Love your bike! Just picked up mine and this is exactly how I want mine to look. Did you get a tune?
Thanks, yeah got a dyno tune at the same time as the cam upgrade. Well worth the money. Enjoy your bike bro
@@mattoo6389 Thanks mate!
Great video man 👍🏼 Can’t wait to my new low ride s in a couple of weeks.
Thanks for watching, enjoy the ride man, stay safe.
Great tastes! Boke looks nice. How tall are you? Are you happy with the 8 inch risers?
Im just over 6ft, im very happy with the 8 inch risers and seat combo, my fists are just level with my heart which is where you want them.
The dingo ate my baby!!!
Very nice and clean. I have almost the same mods (seat, exhaust, MoonsMC tail light), just pegs and grips have from FLO. And the stage2 is on my list as well :))) Keep it going bro! stay safe
Thanks mate, I really like the stuff from FLO, do you have an IG would love to check your bike out.