Відео

That's impressive

smart !

Install video

What about the factory oil cooler lines that attach there? Do those leak because of over tightening as well? I replaced that gasket 3 weeks ago using a Mahle gasket because its like how the GM gasket used to be. I also used a light coat of black RTV on each side of the gasket and it still leaks from the side closest to the rear of the truck! Much better but still dripping.

Price?

Need!

Can I have the Turbo you just ditched?

Split was def not 70 only. And that one isnt even right park lamps aint supposed to be under the bumpers

How much Alternator?

I have “ls3” FIC injectors (1.5”) in a Holley hi ram and the injectors slide up and down to the point I can see the o-rings I can’t see how that will seal

Yep i got this one

I don’t understand how all your pulleys line up with the harmonic if your further forward on mounting everything?!

Just assembled mine. I used the 45 degree boots to make a set for an LS1. Coilpack on the valve cover. 2-1/2“ from inner boot edge to boot edge. I used windex as “lubricant” to get the boots on first. Then crimped the connectors. Then slid the boots back over. I like what you recommended with pliers to squeeze the connector ends together. Then I preloaded the connector into the crimper. Then fed the conductor and insulated end into the connector.

this is the first lamborghini that sounds like a twin turbo corvette😂

(drill bit size) H 0.266in 6.76 mm (Tap) M8 1.25 (he says .125 but that doesn't exist)

Let’s hope you get a free pair of tires for Christmas

Merry Christmas 🎄🎁😉

I bought a 6.0 crate engine from gm. 5000 miles later the cam bolts backed out. Long story short. Don’t trust gm factory crate engines

That thing is badazz

Or the piece will fall in and you have fish around for it 🤦🏻‍♂️

If the block was empty do you normally just go all the way through the block? Or do you always want it to be a blind hole?

Plus lifters, plus cam, plus eco tune etc

So when I put the plug back in do I need to do anything or just plug n play? Bc I see you heated it up once so I’m assuming I don’t have to replace anything?

well I guess you can run the lower ac bracket with your mounts...

The quality of ICT products are absolutely critical 👍

Can you run this with an electric water pump?

Sick people, i guess they want communism I think Biden and Kamala are a peace of shit.

Soo pretty and shiny

Damn man, think im hooked already.....lol

The guy in the thumbnail tried to take Fionas house😂

Placed two orders, looking forward to neither of them having a hat or shirt but a sticker to throw away

Just a beautiful car and love the hard work that was put in it . ❤

if i wanted to use this for a cd009 to ls 5.3 for my lexus would it work for me ?

How about a sponsorship in return for some videos 😂

ok were you put the oil pressure sensor

We specialize in producing this product.

Do you have to change out the lifters to plug the holes?

How long would belt be with the R4 compressor bracket included?

Love ICT Billet products. I have the alternator bracket, TH400 an cooler fittings, and the governor cover for my TH400 transmission. Planning on installing the steam port kit and valley cover on my upcoming LS build! Good stuff guys!

Even if the block off plates and LS7 lifters are used, doesn't the ECM still have to be tuned to stop the ECM from commanding the DFM on and off?

Do you have to swap the lifters out after for non-DFM style? Or will the stock ones work for short term.

No LocTite on the hardware?

Why wouldn't I want to defeat DFM through HP Tuners and simply turn it off? That's what I did for my L83.

If you can destroy a o-ring in a grow like that. Than the o-ring is too big. Looks like the flang is streel on steel. And the flang is thick. And full surface. The tread would rip before bending the flang.

Its a 1/4 inch torque wrench.

It amazes me that people expect to do an engine swap but don't bother torquing fasteners to the proper spec.

Nothing a little RTV wont fix!

Shmoosh? Flatten

Would this braket work on a 2012 5.3ls ?

What about the LM4/Trailblazer 5.3 Style Pump?