- 5
- 49 317
HyCOMB
Приєднався 16 бер 2019
Відео
The Making of Aluminum Honeycomb Panels
Переглядів 45 тис.5 років тому
Proudly presented by HyCOMB Media. The Aluminum Honeycomb Core is formed by fully expanding a stack of heat-bonded aluminum foil; the honeycomb core 'mesh' is then laminated on both sides by aluminum sheets to form a continuous sandwich composite structure; which is then cut-to-size to form Aluminum Honeycomb Panels. After passing quality control, the panels then proceed to other optional proce...
Exterior Cladding - Fire-safe Limestone Honeycomb Panels
Переглядів 2715 років тому
One Kensington Row is a £2 billion development by St Edward: Berkeley Group in West Kensington, London. It features 15,000m² of Lightweight and Fire Safe HyCOMB® Stone Honeycomb exterior cladding panels, supported by HyCOMB® Cladding System. Stone Honeycomb Panel is a type of stone veneer cladding panel, of which a thin layer of stone (typically 2-5 mm) is laminated by aluminium honeycomb panel...
Curved lightweight Stone Facade System Installation Demo
Переглядів 2,8 тис.5 років тому
One key advantage of honeycomb backed stone comparing to traditional stone claddings is its simplicity of installation, which saves time, and essentially cost, on the site. Please find more info on our main website: www.hycombpanels.com At HyCOMB®, we manufacture aluminium honeycomb panels, stone honeycomb panels and their installation systems, we have two dedicated factories for each product. ...
HyCOMB® Showreel
Переглядів 6815 років тому
For more information please visit our website: www.hycombpanels.com At HyCOMB®, we manufacture aluminium honeycomb panels, stone honeycomb panels and their installation systems, we have two dedicated factories for each product. Over the past two decades HyCOMB® has excelled many projects in the construction, vehicle and shipping industry across the globe.
Hello, Can you please share your contact details? We’re looking for Aluminium honeycomb in India.
Stupid video, does not show anything..
so good solution
Where can I buy these panels?
Thank you. You helped me understand the process.
thanks mate
After the panels are bonded and cut to rough size how flat are they? What is the tolerance for thickness or flatness. If a company were to buy these in qty what is the tolerance between orders? How do they hold up to dents or deformation
hey @hatchbackhound Tolerance for thickness depend mainly on honeycomb core block slicers; our current ver. machines cut at a tolerance of within 0.05mm over the whole cutting plane. Tolerance between orders should be within 2 orders of magnitude of the cutting tolerance (0.1mm) as thickness is set by servo motor+screw linear guide machanism (could test to verify my guess) Expanded honeycomb are more susceptible to dents during transportation and handling; unexpanded honeycomb strips for transportation could help solve this issue.
Hello! What is the thickness of the support system? (I mean excluding the 25mm-thickness of the panel itself)
hi Abc G, thickness of the clip is around 30mm. I could send you detailed drawing of the installation system if you could pop me an email. z.ou@hycomb.com.cn
Please send me your sales contact details
Hi Maher, please kindly send your request to sales@hycomb.com.cn. Thanks!
@@hycomb4670 SO WHAT DOES "UK" have to do with anything?
I really don't understand how it goes from sheetmetal to the folded piece before expansion
apparently neither do the Chinese factories that purport to make the stuff. Does your Kanji indicate Chinese? Otherwise, I would be happy to share the secrets. In Japan, Germany and the US we have precision methods.
@@gendaminoru3195 Uh, I'm American, just learning Chinese...
Thanks for the comment. Definitely will include that bit of missing information in the coming videos.
I would assume they weld it with alternating lines then it becomes a honeycomb when it's pulled. The welds would have to be precise so it only welds to the next layer and not 2
종이 허니콤 제작 영상을 보니 판을 자르고 적층하는 공정이 빠진 것 같습니다. 저도 제일 궁금하던 부분인데 안 나와서 찾아봤네요. 제외된 부분 후에 적층된 허니콤을 강하게 압축해서 접착력을 증가하는 방식이 동일하게 있는 것으로 판단하건데 종이 허니콤 방식과 제작과정은 거의 비슷한 것 같습니다.
I have several questions. Can these sheets be butt welded together without the bonding material contaminating the weld? Can we by these in the US/Florida? And do they come in 60"+ panels?
Hi. The aluminium honeycomb panels shown in this video are the most common type, formed by adhesive bonding, we have not had projects for welded type joints for this type of panels yet, though you are welcomb to experiment. The aluminium honeycomb panel usually used for welding is made by brazing methods, a.k.a no glue used in the whole panel. Which we could also supply. The cost for brazed aluminium honeycomb panels are sigficantly higher, hence it's not as popular as this generic ones. You could purchase our products via HYCOMB USA, they are based in Florida:)
@@hycomb4670thank you. I'm a welding teacher at a technical college. If you would be interested in sending us any scraps, we would love to experiment with them.
Can you share the name of the background music?
Hi, the song is called "Other Scenario" by Stanley Gurvich.