Відео

Appreciate it buddy 👍👍

This is THE BEST video I've ever seen...quality product and SUPERB review!!! top marks!!!

Can you just leave plugged in - in Livingroom as a full-time monitor...

Я вчора теж купив Husky ліхтарик. Але мій на 1200 Lumen. Світить дуже яскраво і сподіваюся, що служитиме довго. Дякую за огляд.

I like that 2x4 idea! Thanks for the vid!

Is the light blue/white or yellow? I'm debating on getting him one to make a little tool chest for him.

Seen this for over a year and finally decided to pick one up. Getting a 2nd one so I can give my son one. Him being young, I want him to learn power tools & this is low torque to not rip his arm off.

I certainly like mine.

So why are the ends removable like I have the 24 inch and I'm assuming that the ends are removable because they're shock absorbing so maybe you might damage one if you dropped it from a certain height so I'm assuming it's a replaceable for that purpose I don't know they do come off though they like got a little insert you pull out and then the whole end slides off.

Right back atcha brother! 🎉

I really like the flags in the background! 🇺🇲

I am not clear on what sort of work you cab do on this. How us anytthung secured? No clearance for putting a clamp. No way to get a vise on there.

I really like the Cord Wraps. If your able to get the accessories at any local stores other than Lowes, Comment here

Great system

How do I remove the rechargeable battery?

Where did you buy this pouch from please??

Where did you buy the 7 pocket large technician pouch from please??

Hi!! Thank you for your info videos.😊

How about 2 pairs of channellocks 420, 430. Klein cable cutters 10" pair. Klein voltage/ continuity tester, Klein 4" #2 square tip driver. You should have gotten the klein the insulated 3 drivers from Klein better and cheaper!!

this is kinda more about your tools than the bag 😏.

I dont get it. It takes tremendous force to open the clip. Unwavering tried multiple clips, and it either has required smoothbjaw pliers or mashing the clip against the palm of my hand around my thumb. Is it supposed to be that hard?

I love these toughbuilt pouches! They're very practical and the best part is putting on/ taking off the clip in a matter of seconds! I own two of them and carry one in my tool bag at all times. (Utility knife pouch is my favorite but I also own the tradesman pouch) The only issue I have with them is that now they're harder to find. Lowe's used to carry most of them online and for some reason, they now carry limited quantities and my local one only has like three or four different ones in store. Tractor supply and home depot also carry limited stock of them online but I wish it were easier to get them for MSRP like it used to be a couple of years back! Toughbuilt's official account had most of them on Amazon for MSRP a couple of years back and now it's random third party sellers on Amazon selling them as if they were veto pro pacs. Thanks for the video and I might pick up a couple more for different situations/DIY jobs I may encounter. I'm looking at the drill pouches since I use M12 tools at work whenever I actually need power tools and the technician pouches also caught my eye for when I need more than what my knife pouch can carry!

Where did you get the handle?

Nice

Thanks for your video. For the DR1 receiver, ±1mm & ±3mm accuracy modes can be chosen. In this video, the laser accuracy is so sensitive, if it's not suit for you. You can choose the ±3mm mode.

For the journeyman pouch, do the separators go all the way down into the pouch?

Now you clean two containers. Some say let it dry, and it crumbles right out. And sure, then mix your next batch and have freaking skidders in your fresh mud mix. So, no, I don't get the concept. Just use a small paint mixer in a metal pan. and away you go. I know it works because I filled the pan with 5-minute mud and got it all onto the ceiling, and the metal pan was empty.

Rated for 1000 lbs or 455 kg. Just bought a pair on sale for $14.98 each. Score !!!

Thank you!!!

So tempted by this light.

Hi, I bought the TB-H5-MR-11, but the bit storage opens when I'm handling it, even when shaking it opens the storage, I don't know if it's a defect in the one I bought or if it's just like that?

Have you figured out how to open the battery compartment???

I own this flashlight and thought they did a good job with the exception of the memory mode. The time period required for it to 'remember' your last light level is too long. You have to leave it on for like 10 seconds before it'll remember. Since its starts on high its basically always on high

I got it for 79.99$ on sale at Home Depot. For the price is great. But if you have over 200$ go for Vito pro pac.

Wow... Keep your day job! Show the damn thIng IN USE

show more! What's on the side carabiner loops? Back pocket?

To preserve your sanity, turn playback speed to at least 1.75.

Fyi, I ordered a stubby and driver set on AliExpress, so far I’ve only received the stubby, and it’s defective. Even says so on the box! Exact text: “Product Sales Disclaimer: This product can work well in normal conditions but the bottom storage on some products have the following defects.” Then lists 4 problems. For me, the buttons don’t work well enough to pop the bits out, and the whole thing feels clunky and heavy. And even if I fix the storage, it sounds like there are other problems which make this a hard no. Gonna see if I can return it but judging from other comments that’s not easily accomplished. Hopefully the versions you can buy in the US are better than this, but I’d be careful. If you see a red box with a disclaimer on the back of the packaging, don’t buy it!

I made a similar mistake. This a CO detector. Not a CO2 detector.

What is your favorite place to use a carbon Monoxide tester?

I believe the backing is milled solid aluminum

I almost buy the wiss from home Depot cost $22 but ended up paying under $5 for PITTSBURGH Long Blade Right Cut Aviation Snips with 30% off under $10 item today.

I thought the giant pouches would be the best, but upon buying and starting to use them, I realized that actually their smallest and least cumbersome utility knife pouch is the nicest to use, and it's surprisingly pretty versatile. The big ones have their place, but all of that space is usually not needed, IMO & they get in the way.

I just ordered one based on this video! PS. the shelves should be flip so they are kinda have a lip and nothing rolls off.

I remember those as well. Do they still make them like that?

Like my police radio holster

GOOD POUCH, IS IT EXPENSIVE?

That is cool butt head, but it little pricey when compared to a drill holster. A holster for you drill will always be better cause you don't have your drill/impact swing as you move and constantly tap your leg let alone hit anything your might get to close to, making interior work more work to hold the drill in place and not swing around bang stuff.

Unfortunately the black locking latch breaks over time and use

Just bought this model last night. Tried it out on some sheet metal. First 3/16 rivet I tried, the pin got stuck in the tool. Clearing a stuck pin is very complicated on this model. I suggest buying a more simply designed tool that is easier to clear stuck pins, as invariably regardless what model you purchase you will have many over the life of the tool.