Відео

ПИЗДА ЭТОМУ ОПЕРАТОРУ ОТ ГЛАВНОГО ТЕХНОЛОГА ЗА ОТСУТСТВИЕ ПЕРЧАТОК И ХАЛАТА АНТИСТАТИЧЕСКОГО

7:43 Hi Philip, As late as 2005 we were (at the factory where I worked) lining this up by eye with pegs and putting a negative over the top. I take it this is more sophisticated - is it laser exposer, so there is no positive image on film over the board that needs lining up anymore? (hope that made sense).

6:40 Having flashbacks. On a line at the factory I worked in, my college Tony turned this back on while I was servicing a right angle filter (at Pelvis height). If you got this carbon on you hands you 'll know it takes days and lots of scrubbing to remove. I got a full blast for 4/5 seconds to the "goin" soaked through 3 layers of clothing in milliseconds... and there are some areas you just can't scrub that hard.

Instead of cutting the stencil using the laser cutter, can you 3D print the stencil?

We just got this set up at work and I’m excited to see it in action

Dear San, Greetings!!! Can anyone tell? What causes a black material in the selective solving process? Thanks and regards Vikas Quality Engineer

Потом именно этот припой, но сильно грязный идет к нам на продажу в катушках, не выбрасывать же!

Wonder how long until you discovered that those sanitization instructions were worthless for an airborne virus?

Isn't happen any damage from vapour to PCB or components??

Hey, thank you so much for uploading such an informative material for the students. Could you please upload a vedio which contains all the info about PCB like what is PCB, it's types, it's raw material, it's process. Also how do we calculate the cost of PCB. I'll highly greatful to NEWBURY ELECTRONICS. Regards. Kamya Luthra

How does the carbon hole metalisation compare with the electroless copper deposition? Is there any difference in performance/ cost?

Norris will love this.

Nice video. What about ICT and JTAG tests ? Are you considering adding them to inline testing process?

I operate the Smartflow 2020 myself here in the states. Interesting to see one of the other machines from Ersa doing it's thing. Is yours the dual pot?

Great video and thanks for sharing it.

Hello. How to judge the pcb is already coated or not? In this video i can see the coated area become bluer. It is the UV light to see the coating ?

Nice video, thanks :)

PCB assembly is the process of assembling and soldering electrical components on a circuit board. The system is used for a wide range of electrical items that vary from TV remote controls to aircraft radar systems, and a million things in between. With such a huge variation in PCB requirements, it is no surprise that there are different many different types of PCB assembly processes.

Passions

Neat

Great Video and good explanation... Thank you...

From CEMs looking to outsource small batch orders ... to University Lab's looking for rapid prototypes and everything in between, we've got you covered! No minimum order quantity! www.newburyelectronics.co.uk/

Looking to protect your boards from moisture, dirt ingress and organic growth? PCB Train offers a quality, efficient and fast-turnaround, CNC applied, sub-contract conformal coating service which helps secure the integrity of your electronics in harsh environments.

Hi I think you may need a PNP machine like this I have friends using this model very well ，cheap and stable ua-cam.com/video/VsGQ3Gwg9xQ/v-deo.html ua-cam.com/video/fBCWPg0J5tg/v-deo.html If you need I can help offer CSO 's contact information of manufacture

Great video and thanks for sharing it.

Impressive

Tamil language la sollunga sir this process

Hi,I'm John Z.sales manager of www.grandtop-electrical.com factory and Hongzhou Factory for selling PCBA/Wire Harness/Sheet Metal.We have many clients in US&Canada&Europe who can prove our lower price/best quality/good service .Call Seattle office:3603997772,skype:+16262676301,whatsapp:+16262676301

После JLCPCB это не современная фабрика, а совковый колхоз!

The video is great. There is a lot of knowledge about pcb assembly. If you want to know more related articles about pcb assembly: www.pcbonline.com/blog/EVERYTHING_YOU_WANT_TO_KNOW_ABOUT_LOW_VOLUME_PCB_ASSEMBLY_83.html

That is one tiny SES line. Ours is about a city block long :)

not bad

I want to making surcuit manufacturing unit so please. Give me so guide to buy the machine and price of machine where buy machine My WhatsApp number 7041999978

I usually loathe and detest adverts.... this one was ace.... you must be doing sumfin right. Kepp up The Great Work.

Please Indonesia substitle 🙏🙏🙏

Please opsi indonesia subsitle..

bowser

Nice view of the process. As you would know China has taken the business certainly in the hobby or maker market.

At the beginning, I thought my Display has gone crazy... :D

Excellent video! Thank you for creating and posting!

The biggest problem here is that you are applying the solder paste as if you are icing a cake with a spatula... With a metal on contact stencil and a metal squeegee, the blade should be kept nearly upright and the paste should form a 'roll' in front of the blade. As the squeegee rolls the paste as you draw it across the stencil, it will fill the apertures without forcing the paste down and spreading out under the stencil (smudging). The blade should not leave paste on the stencil after it has passed, otherwise the paste thickness will be incorrect and not deposited to the stencil thickness. This should be done in one smooth motion. In the use of a mesh screen, it would be normal to load the mesh with paste in one sweep and then sweep again forcing the mesh down onto the pcb with a 'snap', but you would not do that with a metal squeegee.

Some questions: 1) What is the typical level of radiation left from X-ray process on the boards after production and how is it kept safe to limit exposure to staff who constantly produce these products? 2) What happens to the activated carbon that cleans out the heavy metals from the water? 3) the result of the strip-etch-strip line looks like pure art to me, do you ever have "mistake boards" at this stage in production that you'd be willing to sell? I think it would look fantastic with a frame around it.

Im an electric engineer . and i really wanna say . this video was great and useful . thanks alot ..

I have watched just about every PCB video in you-tube and i have to say this one is one of the best,nice videos on here well done! Also the work environment look very nice and i bet its nice to work there!