Відео

Really helpful!

Thanks I appreciate the help

Ford escape speakers

C4TOOLS on instagram is the best hacker recovered MINE PERFECTLY thanks a bunch💻👽

$74`/ 1337 /\|\||) ]<|-|-|> `/()2 |>/\55\|/()|2|)5 [-|\|(|2`/|>+€|)

I have a high speed intermittent vibration around 80. Changed and swapped just about everything, grabbed the sway bar and it clunked in the bushing with my hand. Hoping between the two a-arms constantly moving that fast it’s creating a harmonic vibration. Thanks for the vid.

Is your xlt the 4.6l or the 5.4l

so when reviewing any after market radio it's just matching the stock wire to the after market radio wires by using color?

Nice job, ofcourse I got everything from Walmart and nothing fits. Bestbuy had all the right stuff.

Tomorrow the stock unit in my 05 escape gets replaced by a JVC single din unit. I've already soldered the adapter harness to the radio so its just a matter of plug and play using the same Metra single din adapter you did. I kept the stock door speakers but added tweeters to the front for 12khz to 20khz which the factory units cannot reproduce for $8 rather than spending a ton of money.

Mine comes with the stock amp. Bought a wiring kit and single den set up for it but can't match the amp wires up. What color are the cables?

Hello ComputerVermont! Might I ask. Where did you buy the adapter for the escape???

Always always always ALWAYS solder your wires and cover with shrink tube do not use but connectors wire nuts or even just plain electrical I promise you that will end up with a short in the wiring always

I've got an '03 Escape, the same install kit with a single DIN DUAL head unit...2 questions...the small 'tray' above your head unit in this video - can that be on the bottom?...and 2, how difficult is it to remove this install to replace the factory radio if I wanted to sell the vehicle with the factory unit in there? The wiring harness is self explanitory, but how to remove the head unit and the install kit? Great vodeo, thanks!

Thanks for posting. I love my stock stereo in my 05 escape but the no auxiliary or USB really stinks.

dude, your video is realy bad...

you're supposed to remove the big silver trim that holds the HVAC controls then those 2 tabs you broke off can mount to 2 screw points above the ducts and actually lock the unit into place. Also that metal cage (that is like a third thee length of the aftermarket HU has tabs that you are supposed to bend out to lock it to the dash kit then the dash kit goes in then the radio slots into the cage and gets locked in place, the way you put this in someone could jack this radio in 10 seconds.

if you go to crutchfield.com and by your stereo there you'll get the plug in adapter and the plastic head unit adapter usually for free a lot of times if you looked at our discounted radios or discontinued you can get the whole stereo cheaper than just buying the adapter

tryin to find facter. sub conneter

tryin to find facter. sub conneter

we had a cd stuck and got it out. Now we have problems putting one in. The clips on the inside won't go down and ej err comes up any help?

I've got a 07 Escape and it has a cd jammed in it. When I turn it on it says no disc, how do I fix this problem, anyone? thanks forgot to mention it is the audiophile model 6 cd version.

Just found out my cd player in my newly-acquired Ford Escape 05 doesn't work and I think I need to do this. Thanks for your excellent tutorial- I however have no equipment as of yet. Would you mind passing along your list of the here-installed choices? Looks perfect and simple- also I am keeping the current speakers and not messing with anything else in case it matters... thanks! :)

i did this exactly the same but now my car radio wont work the new one and old one. also the Key fab will not open and close the doors remotely.Did i blow a fuse??? any help is much appreciated

Thanks for posting this, it helped me out!

hey

I noticed you didn't plug in the orange wires what are those for

I think I speak for everyone when I say what CD did you test it with?

Hi I have a question, I have the same make and model car Someone who claimed to know what they were doing cut the black small box off the wires coming out our the car, is there anyway to reconnect a new piece onto the wires?

What's the gray piece that you slid over the stereo? I'm trying to install my kit but my stereo is falling through that main opening.

bro how do you not get your bic stuck in that little compartment all the time. I stopped putting it there because I'd be driving and the lighter would stick so perfectly in there it would be near impossible to get out hahaha

hi

Gen X here...I remember the first time I tried to install an after market stereo in a '91 Ford Probe (before the internet was popular)...not knowing, of course, about the two little radio removal tools I could have gotten for $2.99...I used every cuss word in the book and thought I was gonna pull my hair out... ....the Autozone guy saved me :]

Where did you get that stereo surround with pocket from?

I have a 06 tribute with the premium sound.I am curious did you think the speakers still needed to be upgraded after this ? Or did they sound much better with a new head unit ? The factory deck has hardly any sound adjustments.Juts bass treble and mid and thats not enough.

Protip: Wire your aftermarket stereos harness to the Vehicle harness adapter in the comfort of your home. No need to do any of it in the car, as shown here. Can if you want, but no need. Can sit at the kitchen table with everything laid out, do connections, go to car and just plug stuff in.

how do you take it back out to access to AV Cable so I can install subs please respond.

I have a 2005 Ford Escape, and I was able to remove the factory stereo by simply bending a hanger into the "u" shape and using it similar to the video. Simple, free solution for anyone with some metal hangers lying around the house.

I have an 01 , and I did this last year. I have the same kit and stereo as you! Wish I saw this video last year. I had to trial and error it, but it still went smoothly. Glad you did this for future installers! Great radio choice!

this is the only video that helps thanks a lot

Did I miss where you put the ground wire to frame?

Thanks a lot Washington very helpful i have a scape 02 butacas almost the same thanks

looks like you forgot to cap off the orange wires for the Lights/Dimmer it may short something out

No, the Ford DIN tools are to remove radios for Fords only.

Hi, I have a 2005 Ford Escape that already had a Kenwood installed - I need to slide it out to change the cable for IPOD AUX input. Do I need these "Ford DIN TOOLS" to slide the unit out, even though it is not factory? Thanks!

my freind has a 05 ford escape ,full power to the radio but no sound to the speakers, does it have a factory amp? if so where? mabe a inline fuse blown ! he tryed another radio same thing no sound.

I noticed that too

What is the type of stereo unit is this? Like the model, etc...did the double din installer(one u just broke the piece of) come with it? Does it have an AUX? Did u install custom stereos on the car audio? if i do so do i need extra wiring or is it just clip and go with the new stereos? thanks!!!

what could you use in place of those U shaped clips at the beginning or where could i get them for cheap or free

I have a Ford Escape 2005 model and this helped a lot! So I just need the Ford- specific harness? (wire connector)