Відео

What size crown can be cut nested with this fence?

Makita needs to redesign this awful fence. I just bought one and wish I hadn't. It has many great features, but the fence is a terrible design deal-breaker. It cannot be properly adjusted and doesn't support the workpiece properly behind the blade making the saw very susceptible to violent kickbacks. The rear screws to the throat plate are buried under the fence which must be unbolted and removed in order to change the plate, then the fence must be recalibrated. Try before you buy. Wish I had spent the extra money for the Kapex. Shouldn't have to buy a $150 aftermarket fence just to have a safe clean cutting saw.

Great product i'm gonna buy.Question If you don't install the crossbar will the kickstand fold further back for storage ...i see its used for positioning and alignment.

I don't understand. Maybe HF fixed the issue?? I literally just attached mine and there is plenty of clearance. Just make sure they are tight enough.

Can you use an annular cutter to notch mild steel tubing?

What fence are you using ??

How about doing a video on measuring and cutting the wood with a rabbit for the glass? Getting the measurement correct is the hard part for most of us. Thanks for your time.

i picked up your fence for the 20v dewalt miter saw about a year ago, well made and relief cuts where they need to be. but if given the choice id of paid more to get a thicker fence. just barely touched the blade to it after changing setups not realizing i needed to slide the fence out of the way and it cut halfway through it. not a fault of the product it was deff user error, but a thicker fence might have kept the damage to just a knick on the back.

I must’ve missed something. How does it replace your chopsaw?

Great solution

Dewalt dropped the ball on this saw.

I literally just had to make this exact thing. This absolutely works

can you ship to the uk?

Nice setup. Do you know if the cold cut steel saw DW872 has any mods to the bed and fence. Mine is so inaccurate from years of use I need to do something. I feel the bed metal is too thin. I’m having to add shims and check square on every cut. Even the fence is leaning over when clamping parts. Driving me crazy. Thanks again. Any help is appreciated.

What kind of tape are you using to level that fence out? It looks like frictionless/slide tape or is it just regular tape?

Cool product. Just came across this video and after seeing what you guys are offering I went over to your site and ordered the Notched Fences with the 0 Clearance Insert

I just picked one up... any tips on getting this dialed in? I hear many people bitching and complaining about it .. I have a feeling they never touched it out of the box.

Great solution

Is there anyway you can do a detailed video on installing and adjusting the couplers on the EZ Speedy Fence? I'm able to set my fence height plumb and square to the miter saw but the coupler assemblies/strut mounts become loose when sliding into the Dewalt stand and end up dangling by the time I'm finally able to remove the fences. Its such a pain, almost rendering them useless. I've tried lubricating the Dewalt stand channels but it's still a challenge to install and remove the fences. Please show what to torque with the two crescent wrenches. I know you have a wonderful product but I just don't have it dialed in.

I just ordered your kit for HE74 mounting. The manual talks about removing the rubber feet but you'd need a corkscrew to get those out those rubber feet don't pop out with a screwdriver etc. Rather than destroy them to remove them I ordered your kit which seems like a cool enhancement anyway.

Will this kit fit the Festool Kapex KS60 E to the same dewalt stand ?

Purchased complete kit (axel, stand handle and wheels). High quality. Very pleased.

That looks amazing.

Should measure both pieces before cutting. Measure front piece from front of blade and back piece from back of blade

We was going to mount that saw in a flat table and they have stickers over the mounting holes that say to remove the rubber feet before mounting and we couldn't for the life of us figure out well why do they need us to take the rubber feet out when it's going to sit on a flat table

It looke like it does a fine job but I think I will stick with my TN-250. Less of a shop floor footprint.

That looks useful for some people but I am happy with my 6" tall fence I bought from you a while back. It may be my phone, but the audio seems to be very low volume.

How much does this machine cost?

It's very cool, I want this machine, how do I get it?

Great stuff! Sorry, a bit confusing... but is the "set" left AND right bevel fences together in a set. . . or is the "set" just a right bevel fence "set" or JUST a left bevel fence "set"...?

I would suggest hand turn knows rather than Alan wrench for locking the stops down.

Well done but you do do it lots. I will give it a go.

Recently purchased a DeWALT DWS716XPS miter saw and discovered during calibration efforts that the lower and upper fences, although machined, have some alignment variations that prevent the degree of precision I’m looking for. How these issues escape DeWALT QA is another matter, but I had previously bought some zero clearance inserts for a DW703 10” saw and discovered CFS had a solution to the fence issue in their EZ Speedy Zero Clearance Fence as well. Long story short…after watching multiple videos on the product I still somehow managed to order the wrong one (Duh). I reached out to CFS customer service and spoke directly to Rob who was more than understanding and pointed me to the correct item I needed. (Tip: check the motor housing for the part number) Rob accepted my return, offered me a refund, and had the correct part in stock so I would just need to reorder the correct item. Please keep in mind that it is a lot easier to process a return if the item is not damaged, the protective film is still on the parts and the original packaging is intact so that Rob can restock the part. So, check fitment before doing anything and if it doesn’t look right…you probably ordered the wrong item. Thanks again Rob for taking the time to check in and your excellent customer service and products.

Genius product!

Hi, how do I get the kit? Thanks, jt

Hi. How do I get the kit

Nice!

Looks like an awesome product - thanks for posting!

Is this available to purchase

Are these available for sale?

Hi sir this seems a perfct notchng machine.simple and clean.usually how much does this cost sir.?also is this can b used for cutting daily 1000 pieces of alumnium (1.6mm thickness).

super....

cooooooooooolllll!!!!!!!!!!

Cg

How about the rabits

Will this system work on the Harbor Freight Hercules miter saw stand?

What is the link to purchase the zero clearance for the LS1019L?

How does the auxiliary fence affect dust collection on the Mikita LS1019?

Where do you purchase the wheels that go on the end unit also the adjustable flip away stops thank you Bob

Where do you buy the wheels and the easy stop. Thank you