Відео

looks like original 36 horse. and the leak looked like oil cooler seals.

what size drill bit did you use I have same issue

When taking the drums off all you need to do is back off the brakes with the adjusting screw located on the outside of the drum itself. You'll see a little circle on the outside drum you can then turn the drum until you can see through the hole and locate the star adjusters on the brakes just use a screwdriver and just back them off.

I raced one of these in hare scrambles in 2000...trying to kick start this thing, on the opposite side after dropping it, good luck...lol. It was gorgeous though!!

Those old baja tires were actualy fine they are in abut the same conditon as mine and they take the abuse fine

Keep going!!!

That sucks about losing the shop.

Good luck finding new place! 👊🏽✌🏽

All that time figuring out how to lift it and you two could have picked it up and carried it onto the trailer.

I like the stock sound of pea shooter exhaust. It’s that VW chirp I love so much. It’s not a power set up for sure, but its own distinct sound.

I have the same bike (1999 TE610) Seems there are a lot of subtle changes over the years so finding someone with the exact same year is pretty cool. I'm currently trying to get mine running after a few years sitting do to health problems. I cleaned the carb up but haven't gotten it to start up yet. Fuel line routing is a nightmare but I think the diagram you showed helps to simplify things. Also, the inlet on my carb is facing straight down so I just run the piece of line from the bottom nipple on the petcock in a U shape and back up into the carb. My bike has a Baja light kit and is tagged for street in California. I'll probably sell it after I get it running.

I’m just posting here to help the algorithm.

Love the video. What parking brake cable did you use as I can not find one that works for my 60 Ranchero on Amazon.

Great video and work on the bushings! At 5:30 ts made me pull my foot back also! 😂

Love the image of the duct tape wound cover on the man about to use a blowtorch

soon.

It's such a shame you can't buy rubber bushings anywhere. Maybe someone knows from which other cars it is possible to fit

Real projects with real issues. Love it. The time it takes is always longer than expected. Thanks for not cutting out the challenges.

easy grease access!

honesty on youtube, what a concept

it's not that you taped the boot that makes this great, it's that you did it, documented it and then shared it with the world. i'd only do the first part... and since you won't do it, i'll go work on a 2002 and will not document it, well maybe i'll make an Instagram post, but probably not.

Keep at it! Great work and enjoy seeing the progress. And I appreciate that sometimes it makes sense to outsource a particular task or step to a specialist.

Match the paint and you’re done

On 15:22 what name of this and 15:23 how I can buy it

So happy for you man, we all gonna get there, working out the details on a 09 Cobalt SS myself making 395

Seriously 😅😊😂

Awesome!

Where did you get those feeler gauges ??

I found this video informative and full of useful information that nearly anyone can implement to improve their life, instantly. Also, we get a special treat when the contents of the upper "Workorder Residue" drawer is finally revealed. Quality You Tube entertainment.

Elvis Presley edition buggy with all terrain mud tires each 265mm width of tread and fiberglass is from 5051VW garage and vintage VW parts used parts storage in Pennsylvania. Too much work and so order from Western Wolfsburg for rear main seal and gasket kit for why kill the original where sand dune bug rode in California Arizona dunes is worth less than $5,000 dollars and original Kafer is worth almost $100,000.00 dollars worth of Beetle color replicas of Mother in Air Force that she drove her Army and white star on red bug on both side embalmed of the Army. Late Dad is retired second class Airman.

The clutch line is snap off and it probably is broken cable and where to plasma cut the underside that in the bottom pan have the expose the cable and make clutch into disengage and engage able. Plus there is hole pipe for cable going thru under rear seat and I think it is for heat pull open heater and also for emergency brake strands/ wire go into the hole/tube as loose not tight on the movement of cable.

You can have the engine but the title will be hard to come by unless you have a good lawyer that a giveaway the Beetle color red and all I'd perfectly in order as original and the engine looks old and it is not a swap engine. Qualified you to get a new pink slip because it is inside the service of my axe returned technician and get Brake job is the highest priority for 1961 Beetle 1500.

Slot of oil leak from the engine. The transmission cannot leak compare to big leak. Only engine can do that leaking oil.This is not rebuild engine. There is research in the carburator and accelerator gas pump is very corrosion in most of the time but we'll check and see?

Pull simple to have the valve cover comes right off. The color is black soot thinning gum to the cylinder head, is it?

The electrons is weak differences of two posts force. The body metal of the Kafer is static but it will be grounded by touching the dirt outside with wire cable. Another way is use the magnet screwdriver and flick the point in distributor until it flick arc jump across. Then static is neutralized and not interfere with positive and negative charges.and

Oil cooler have aged to the time of 1961 until 2023 ad tt hen the oil cooler seal hasn't leak yet. I think it is to see if the seal is soft like new. We don't know. Smelling gases and smoke from exhaust will tell that it is not rebuild. Cool flow of exhaust and very little hydrocarbon in tailpipe is great. Oil temperature gauge with copper tube from the sensor or ambient temperature sensor or laser thermometer will tell if the engine is not over heat.

The older man dies is just a friend to a lady. The lady was named Herbie.

Yes down in gullet. This one gully is gas line and another meaning for gullet is shock coil touching up there is the round gully.

The wrench for oil strainer and bottom lid needs to have magnet install and oil is clean but check the oil and change oil for oil cooler needs 5W30 oil detergent. Wire brush get a loan of tools from a friend to check for trans axle and transmission look like it's leaking gear oil. The Channel heat flow in rocker panel will take some work on rebuild the press hard of the thick foil of steel gauge 27 - 28 atop the old pan buy the 6 foot x 8 foot sheet from professional garage building with where welder and California sent the USA steel of roll into wheel of tin sheet to Texas worker union at Volkswagen Camper with floor on wheels dealership of info by calling for a price of the new replacement.

Drive it now but make sure the blinkers and head light works. Have Herbie belly fill with red tube and spray some oil Lubrican and tighten spark plug thread to the hole of the jug. number 53 racer had a collision and badly damaged front bumper and bonnet.

The color red and pant in a 1961 Volkswagen 1500cc wagon bug that could it be compression of cylinders and rings go to very low PSI? yes, it usually does after wear it out and sound like very low volume of the 4 bangers. Why not add dual carburetors and EMPI Parts linkages.

Great video. Have been wondering about trying LEDs. Might just be hard to tell from the video but it appears that on your garage door the new bulb pattern is a little higher. Will you have to adjust the headlights as a result?

I am restoring a 1974 BMW 520 E12 with the M10 engine and Cylinder 1 is in terrible shape. cyl 3 has some pitting, but isnt too bad so that one, plus cylinders 2 and 4 just need some honing.

Mike's left hand is now hella-smooth. Like Curley in Of Mice and Men LOL

It should be bent. Change the shift rod bushing and inspect the hanger first.

that's right the shifter tube should be bent

the world needs more kids playing guitar.

One step closer. Looking good .

Love the progress!

Hello, I am looking to get an under glow kit for a 1972 Volkswagen super beetle and was wondering the Length on your under glow kit